···
Log in / Register

How to reset the oil maintenance reminder for Roewe RX5?

6Answers
DelJeffrey
07/29/2025, 06:32:15 AM

To reset the maintenance light on the Roewe RX5, a specialized setting instrument is required. Below is the relevant information: 1. Function: The Roewe RX5 is equipped with a Tire Pressure Monitoring System (TPMS), which is controlled by the ABS and constantly monitors the speed of each wheel. Under normal driving conditions and without pressing the brake pedal, if the ABS detects that the rotation speed of one or more wheels differs from the others, the system will calculate the tire pressure change based on the speed difference. When the change exceeds the preset range, the alarm function will be triggered, and the TPMS warning light (yellow) on the instrument cluster will stay illuminated. 2. Exterior Design: According to the official preview images, the Roewe RX5 adopts the "Rhythm Design" language, featuring a matrix LED headlight composed of 24 LED light sources. The body lines are stylish and dynamic, with a dual-waistline design on the side profile. The roof is equipped with a luggage rack, and the overall body lines are full of rhythm and tension.

Was this review help?
111
Share
DiAaliyah
08/13/2025, 10:51:27 AM

I just helped a friend reset the maintenance light on the Roewe RX5—the steps are simple: First, turn off the ignition and remove the key, but don’t start the engine. Then, press and hold the 'OK' button or the right-side control key on the steering wheel for a few seconds. Next, turn on the ignition without starting the car, and the dashboard menu will pop up. Use the buttons to scroll down to 'Maintenance Settings' or a similar option, enter it, and select 'Reset Oil Maintenance'—confirm, and you're done. I’ve done this several times before and noticed that sometimes the menu responds slowly, so be patient and avoid pressing too quickly. If the light doesn’t turn off, check the fuse or battery connection—voltage fluctuations often cause issues. Regularly resetting the maintenance reminder ensures timely servicing, as skipping oil changes can harm engine longevity. I recommend checking the oil level every 5,000 km for peace of mind. Remember, DIY carries minimal risk, but if unsure, visit a professional shop.

Was this review help?
11
Share
Expand All
Spencer
10/07/2025, 01:34:11 AM

I've been using the Roewe RX5 for several years, and resetting the maintenance light is really effortless: After turning off and stabilizing the car, hold down the steering wheel control button for about 3 seconds, such as that small triangular button. Turn on the ignition without starting the engine, and a message box will pop up on the center console screen. Tap 'Vehicle Settings', find 'Maintenance Reminder', select the reset oil option, and confirm. I often do this on my way to or from work—quick and time-saving. If encountering obstacles, like unresponsive buttons, restart the car or refer to the manual for model year differences. Don't delay resetting the maintenance light; aged oil can easily cause engine wear. Usually, I perform simple inspections with my own tools, like regularly cleaning the air filter to prevent issues. This habit has extended my car's lifespan, avoiding minor problems turning into major expenses.

Was this review help?
8
Share
Expand All
GideonMarie
11/20/2025, 01:57:41 AM

Resetting the maintenance light on the Roewe RX5 is quite straightforward: turn off the ignition, power on the interface, navigate the menu to select the reset option. I first turn off the engine, press a button on the right side of the steering wheel, such as the INFO key, wait for the car to power on and the screen to light up, then find the maintenance settings to confirm. Occasionally, there might be misclicks, so trying a few more times helps. Here's a personal tip: if the reset fails, check the wiring connections or the spare fuse. Doing it yourself is super quick and saves on repair costs. Regular maintenance is crucial, as dirty oil affects performance.

Was this review help?
16
Share
Expand All
OSawyer
01/10/2026, 03:34:16 AM

I often pay attention to car maintenance. The steps to reset the maintenance light for the Roewe RX5 are: Park and turn off the engine. Press the directional buttons such as the return button, turn on the power without starting the engine, enter the instrument menu to find "Maintenance Management," select the oil reset option, and confirm. Proper operation is crucial, as rushing may lead to errors and system lockout. The maintenance light indicates the oil change cycle; failing to update the oil in time increases engine friction and driving risks. It is recommended to combine this with regular oil pressure checks to prevent potential issues.

Was this review help?
4
Share
Expand All
RachelLynn
04/07/2026, 01:13:49 AM

It took me a long time to figure out how to reset the maintenance light on my Roewe RX5 for the first time: Turn off the engine and hold the steering control button (like the OK button) for 5 seconds. Turn on the ignition without starting the engine, wait for the screen to display the menu, navigate to "System Settings," and find the oil reset option under maintenance. Operate each step slowly without pressing too quickly. Previous attempts failed due to poor button contact or incorrect ignition position. Mastering this saves effort and money while sparking an interest in car maintenance. Regular servicing ensures smooth engine performance and safe, risk-free driving.

Was this review help?
15
Share
Expand All
More Q&A

What to Do When the Kia K4 Key Fob Battery Dies?

When the Kia K4 key fob battery dies, you need to remove the buckle on the back of the car key, then take out the mechanical key to expose the remote key battery. Replace it with a new one, and reassemble the key and buckle. The battery powers the door opening/closing and engine start functions. Without power, the key fob will be unusable, so owners should regularly replace the remote key battery. The Kia K4 is a mid-size sedan from Kia, with dimensions of 4720mm in length, 1815mm in width, 1465mm in height, and a wheelbase of 2770mm.
102
Share

What does the triangle with an exclamation mark in a car mean?

Car triangle with an exclamation mark refers to the conventional faults of the car. The conventional faults of the car include overheating of the dry dual-clutch transmission, intervention or failure of the fuel cut-off system, parking sensor failure, exterior bulb failure, engine oil pressure sensor failure, traction control system warning or failure, etc. As long as one of these faults occurs, the triangle exclamation mark light on the dashboard will light up. In addition to the triangle exclamation mark indicator light, the dashboard also has indicator lights with exclamation marks such as tire pressure indicator light, lighting fault indicator light, steering system fault indicator light, brake system fault light, transmission fault indicator light and windshield wiper fault indicator light. As long as the warning light with an exclamation mark lights up, it means that the corresponding part of the car has a problem and should be checked and repaired in time.
109
Share

What Are the Common Knowledge of Traffic Rules?

Here is an introduction to the common knowledge of traffic rules for driving tests: Common Knowledge 1: Pedestrians should cross the road using pedestrian crossings; stop at red lights, proceed at green lights, and yellow lights indicate a warning. When the yellow light is on, vehicles and pedestrians are not allowed to proceed, except for vehicles that have already crossed the stop line and pedestrians who have entered the crosswalk, who may continue. When the yellow light is flashing, vehicles and pedestrians must proceed under the principle of ensuring safety. Common Knowledge 2: According to road division, generally, motor vehicles, non-motor vehicles, and pedestrians should travel in their respective lanes. Where there is no division of motor vehicle lanes, non-motor vehicle lanes, or pedestrian walkways, motor vehicles should travel in the middle of the road, while non-motor vehicles and pedestrians should travel on both sides of the road. Common Knowledge 3: Dedicated lanes are set up on roads, allowing only specified vehicles to pass. Other vehicles are not permitted to enter these dedicated lanes without authorization. Common Knowledge 4: Both the driver and passengers of a motorcycle must wear safety helmets as required. Common Knowledge 5: Motor vehicles must not carry more passengers than the specified number, and passenger vehicles must not carry goods in violation of regulations.
103
Share

How to Shift Gears Smoothly Without Grinding in FAW J6?

The shifting technique for FAW J6 is to shift gears timely, correctly, smoothly, and quickly. When starting the vehicle, it is generally recommended to use a low gear. Once road conditions permit, promptly shift up to higher gears in sequence. Higher gears are generally more fuel-efficient than lower ones, so it's important to upshift promptly after starting and avoid driving in a gear that's too low for the speed. More details about vehicle gears are as follows: 1. Introduction One: Generally, it is not allowed to forcibly shift into a lower gear when the vehicle is at a high speed. This should only be done in very special circumstances or when the vehicle's brakes suddenly fail and engine braking is necessary. 2. Introduction Two: First gear is used for normal starts or climbing very steep hills, with speeds typically around 10 km/h. Second gear is used for accelerating after starting or for low-speed driving, with speeds typically around 20 km/h. Third gear is used for speeds between 20-40 km/h and is commonly used for city driving. 3. Introduction Three: To engage first gear, move the gear lever to the left and then push forward. For second gear, move the lever to the left and then push down. For third gear, push the lever straight up from the neutral position. For fourth gear, push the lever straight down from the neutral position. For fifth gear, push the lever to the right and then straight up.
116
Share

What materials are needed for a driver's license replacement and how long does it take?

To replace a driver's license, the original and photocopy of the motor vehicle driver's identity document must be provided. Below are some important notes regarding driver's license replacement: Do not drive during the interim period: If replacing a damaged license, the driver must not operate a motor vehicle with the original license during the interim period before receiving the new one, as this will be considered driving without a license. The original license becomes invalid: After obtaining a replacement license, the original motor vehicle driver's license becomes void. Other documents: Besides loss or damage, another reason for replacement could be the expiration of the license. In this case, the original and photocopy of the physical condition certificate must also be submitted.
108
Share

Which Lane is the Deceleration Lane on the Highway?

On highways, there are generally three lanes: the left lane is the overtaking lane, the middle lane is the travel lane, and the right lane is the deceleration lane. In the case of four lanes, the left lane is the overtaking lane, the middle two lanes are travel lanes, and the fourth lane is the deceleration lane (or emergency stopping lane). Additional information: Article 78 of the Implementation Regulations of the Road Traffic Safety Law stipulates: 1. Regulation 1: Highways shall indicate the speed limits for each lane, with the maximum speed not exceeding 120 km/h and the minimum speed not less than 60 km/h. 2. Regulation 2: On highways, the maximum speed for small passenger vehicles shall not exceed 120 km/h, for other motor vehicles not exceeding 100 km/h, and for motorcycles not exceeding 80 km/h. 3. Regulation 3: For roads with two lanes in the same direction, the minimum speed for the left lane is 100 km/h; for roads with three or more lanes in the same direction, the minimum speed for the leftmost lane is 110 km/h, and for the middle lane, it is 90 km/h. 4. Regulation 4: If the speed limit indicated by road signs is inconsistent with the above lane speed regulations, drivers shall follow the speed limit indicated by the road signs.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.