How to Reset the Maintenance Reminder on a Volkswagen Polo?

2 Answers
McDavid
07/24/25 8:16pm
To reset the maintenance reminder on a Volkswagen Polo, follow these steps: 1. Turn off the ignition switch and shut down the engine. 2. Press and hold the right button (reset/adjust) on the instrument panel. 3. While keeping the right button pressed, turn on the ignition switch. 4. Continue holding the "reset/adjust" button until the maintenance light enters reset mode, then release the right button. 5. Within 20 seconds of releasing the right button, press the left "menu button" once to confirm the reset. Following this procedure will clear the maintenance interval indicator and restore it to the normal display mode.
Was this review help?
12
1
Share
DeKhloe
08/11/25 11:04am
I've been driving a Volkswagen Polo for several years, and every time after maintenance, that reminder light pops up annoyingly. Later, I learned how to reset it myself. The operation is quite simple: first, turn off the engine, then turn the key to the ignition position without starting the engine—just until the engine light comes on. Then, look at the dashboard, find that small button (usually the odometer reset button), press and hold it for about 5 seconds. You'll see the maintenance reminder light blink a few times and then turn off. At this point, release the button and start the engine to check. Remember, this reminder is to alert you whether the oil or filter has been changed, so don’t just reset it to save trouble—make sure the maintenance is done first. Your car is your partner; timely maintenance extends the engine’s lifespan and ensures safer, smoother driving. This method saves the hassle of going to the 4S shop and also helps you learn a bit about cars.
Was this review help?
12
5
Share
Expand All
More Forum Discussions

What are the reasons for a car's air conditioner not cooling?

Reasons for a car's air conditioner not cooling: 1. Blockage in the receiver-drier, expansion valve screen, pipelines, or hoses; 2. Issues with the refrigerant, such as insufficient amount or complete depletion leading to no cooling; 3. The compressor drive belt being too loose, broken, having poor sealing, or the electromagnetic clutch being damaged—a loose belt will slip and fail to transmit power properly; 4. Blown fuse or short circuit in the electrical system; 5. Damage to the blower switch, blower, or other electrical components; 6. The condenser being too dirty—accumulated dust over time reduces cooling efficiency. When using the car's air conditioner, it's important to pay attention to its maintenance. Regularly turning the fan to high speed can help blow out dust from the inner surfaces of the air ducts to prevent blockages.
11
1
Share

What are the symptoms of a broken engine mount pad?

Common manifestations of a broken engine mount pad are as follows: 1. When driving under low gear with high torque, there will be a jerking phenomenon, and reversing will also cause stuttering, which can only be solved by increasing the throttle; 2. When starting or turning on the air conditioning for cooling, the engine shakes significantly, and the steering wheel vibrates noticeably during high-speed driving, with vibrations also felt in the accelerator and brake pedals; 3. When accelerating in second or third gear, a sound similar to rubber friction is often heard. If the engine mount pad exhibits the above problems, it can be determined that the mount pad is damaged and should be replaced promptly. Without effective shock absorption and support, the engine may damage some components, affecting its working performance, leading not only to operational shaking but also to unstable engine fixation and wobbling.
16
4
Share

Is it necessary to stand guard when getting a driver's license?

Currently, some provinces still require driver's license applicants to participate in standing guard duty as part of their learning process. Here are the relevant details: 1. Consequences: This is a regulation set by the traffic department. Without completing the standing guard duty, applicants cannot take the fourth subject test. Driving schools are assigned a specific quota each month and must send students to perform guard duty. Students only need to arrive at the designated location at the specified time according to the assigned task, spending 1~2 hours per day, with a total of 6 hours required per person. 2. Notes: If no traffic police are found during the standing guard duty, the time will not be counted. The standard procedure is for the traffic police to report to the vehicle management office for registration after the student completes the duty. If no traffic police are encountered during the duty, students should contact their coach to find a solution. If no solution is available, they can simply return.
9
1
Share

What is the reason why the Camry hood always shows open?

Camry hood always shows open is caused by sensor failure. The following are specific introductions about Camry: 1. Fuel consumption: Camry's high-speed comprehensive fuel consumption is 6.5L, and the urban comprehensive fuel consumption per 100 kilometers is 10L. 2. Power: Camry uses a 2.4L naturally aspirated engine with the code name 2AZ-FE, with a maximum horsepower of 167 and a maximum torque of 224 Nm. It has an aluminum alloy cylinder block and cylinder head, uses multi-point fuel injection, and is equipped with VVT-i technology. It is matched with a 5-speed automatic transmission. 3. Configuration: The front suspension uses MacPherson independent suspension, the rear suspension uses double-wishbone independent suspension, and the steering wheel is mechanical hydraulic power-assisted. The front row driver and passenger are equipped with airbags, the front row is equipped with side air curtains, and the front and rear rows are equipped with head airbags, with high safety coefficient configuration.
9
0
Share

What are the battery specifications for Subaru vehicles?

Subaru Outback uses Q85R, and the start-stop battery is 90D23R. Battery principle: A battery is essentially a storage battery. During charging, external electrical energy is used to regenerate the active materials inside, storing electrical energy as chemical energy. When electrical energy needs to be released, the chemical energy is converted back into electrical energy for output. Precautions: When Outback owners inspect the battery and battery fluid level, if they find that the battery fluid level is below the lower limit or there is a leakage issue, they should promptly visit an authorized Subaru service center for inspection. Alternatively, owners can add distilled water to the upper limit themselves. If distilled water is not added, the positive and negative plates of the battery will be exposed to air. Prolonged exposure will cause oxidation with the air, affecting the battery's lifespan and capacity.
19
4
Share

How many turns of the steering wheel are appropriate for a right-angle turn?

It is generally appropriate to turn the steering wheel two full turns for a right-angle turn. First, ensure the vehicle body is properly aligned before making the turn. If the body is tilted, you are likely to cross the boundary line during the turn, resulting in failure during the test. Regular practice is essential to recognize when the vehicle body is properly aligned. Here are some key points about right-angle turns: 1. Right-angle turns can be either left or right turns. For a left right-angle turn, steer slightly to the right (as turning right tends to bring the vehicle closer to the right boundary line, so it's advisable to stay slightly to the right). For a right right-angle turn, steer slightly to the left. 2. When the front of the vehicle (engine hood) reaches the corner, pay close attention to the right-side mirror to ensure it remains parallel with the boundary line.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.