How to reset the maintenance reminder on a Haval vehicle?

[LaLincoln]

The method to reset the maintenance reminder on a Haval vehicle is as follows: 1. Turn off the ignition switch, press and hold the trip meter reset button on the instrument cluster; 2. Turn on the ignition switch, the odometer display will start counting down; 3. When the display shows 0000.0, release the button to complete the reset. Additional relevant information: 1. Resetting the maintenance light is a necessary operation after vehicle maintenance. This maintenance light serves as a fixed mileage reminder function and has no other connection with the vehicle's operation. It simply reminds the driver that maintenance is required at the specified mileage. 2. Haval is a sub-brand under Great Wall Motors. Its vehicle lineup includes the Haval H2s, Haval H2, Haval H4, Haval H5, Haval H6, Haval H6 Coupe, Haval H7, Haval H9, Haval M6, Haval F5, and Haval F7.

[StTheo]

The first time I drove a Haval car, I also encountered the maintenance reminder issue, which was quite annoying. While driving, a warning light would pop up on the dashboard, like an alarm clock reminding you to get maintenance. I remember spending a long time fiddling with it in the car before finally figuring it out. Here's the method: First, don't start the engine—just turn the key to the ACC position, where the dashboard lights up but the engine doesn’t run. Then, press and hold the Trip button or another settings button near the steering wheel (the exact button depends on the model). For some cars, you need to hold it for about 5 to 10 seconds until the warning light turns off or the screen shows that the maintenance has been reset. If you accidentally release the button too soon, you’ll have to start over. Once done, the reminder will be cleared, and it will only reappear the next time an oil change or other maintenance is due. I find this quite convenient, but you have to be precise—otherwise, it’s easy to make a mistake. Also, regular car maintenance is crucial to prevent engine oil buildup or part wear that could shorten the car’s lifespan. In short, you’ll get the hang of it after a few tries—just don’t rush to start the engine.

[McSophie]

As a car repair enthusiast, I've done some research on the maintenance electronic system of Haval vehicles. Clearing the service reminder is actually quite simple—the key lies in resetting the instrument cluster control module. First, get in the car and insert the key without starting the engine, putting the vehicle in ready mode. Then locate a multifunction button, commonly the Trip button on the edge of the instrument panel, and hold it down continuously for about ten seconds. The system will beep or flash to indicate completion. This isn't highly technical work; it mainly relies on manual resetting, similar to other car brands, avoiding the need to adjust complex circuits with wrenches. I've also found that failing to clear this prompt promptly won't affect performance, but it might distract you while driving. I recommend regularly checking the manual or searching online for model-specific guides, as operations may vary slightly between different Haval models. Regular maintenance can extend the lifespan of the engine and transmission system, so don't overlook this small task.

[VonSamuel]

Don't panic when the maintenance reminder lights up in your Haval vehicle. It's simply a prompt for timely oil changes and inspections, and clearing it isn't difficult. The basic steps are: after getting in the car, don't start the engine, turn the key to the second position, then press and hold a certain control button on the dashboard for about ten seconds until the reset prompt appears. I always pay attention to these details while driving to avoid accumulating problems. Delayed maintenance increases the risk of engine failure, and regularly clearing the reminder helps maintain safety.

[SanSebastian]

I've tried resetting the maintenance reminder on my Haval, and the method is quite straightforward: Turn the key to the accessory position (engine off); then press and hold the setting button, such as the Trip button, for about 5 seconds until the indicator light goes off. The whole process takes just a minute or two—don't overcomplicate it. If you're unsure which button to use, check the owner's manual or try other button combinations—some models require selecting the reset option via the steering wheel control menu. After completing the reset, it's advisable to note down the next maintenance date to keep your vehicle in optimal condition.

[BrantleyMarie]

When clearing the maintenance reminder on a Haval vehicle, a common mistake is pressing the button repeatedly without switching to ACC mode, rendering the action ineffective. The correct procedure is to ensure the car is powered on but not started; then hold the Trip button for ten seconds until the reset signal appears. If the reminder persists, check the button operation or whether the system has frozen and requires a key restart. Additionally, this alert is primarily a maintenance reminder rather than a fault indicator—ignoring or failing to clear it won’t damage the car but may mislead you into overlooking actual service needs. Clearing the prompt post-maintenance prevents premature alerts next time, extending vehicle reliability. Don’t underestimate this routine adjustment.