How to Reset the Maintenance Light on a Jetour?

[VanGavin]

To reset the maintenance light on a Jetour: 1. With the vehicle turned off, press and hold the steering wheel button; 2. Press the power switch twice without stepping on the brake and without releasing the menu button; 3. The maintenance light will disappear once the dashboard lights up. The purpose of the maintenance light is to record the mileage of important components, serving as a reminder for both the vehicle owner and automotive maintenance personnel. Taking the Jetour X70 as an example, it features a front MacPherson independent suspension and a rear multi-link independent suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 156 PS, a maximum power of 115 kW, and a maximum torque of 230 Nm, paired with a 6-speed manual transmission.

[LaColeman]

Last time I drove my Jetour, the maintenance light came on, and I just reset it myself—it's a pretty simple thing. First, turn the key to the ON position but don't start the engine. Sit in the driver's seat, look at the small display on the dashboard, and find the tiny reset button, usually near the tachometer or speedometer. Then press and hold it for about 10 seconds without letting go. When you see the maintenance light icon blink and finally turn off, it means you've succeeded. The whole process takes just half a minute. If this method doesn’t work, the button might be faulty or the system could be stuck. In that case, wait a few minutes and try again, or check the owner’s manual—it has detailed steps for specific models. As a long-time owner, I recommend resetting the light before regular maintenance to avoid false reminders affecting your judgment. Also, the button location may vary across different Jetour model years. For example, older models have it on the left side of the steering wheel, while newer ones integrate it into the dashboard menu—both are equally convenient. With a decade of driving experience, I’ve learned to address such issues promptly for peace of mind and safety.

[Erin]

With more experience in car maintenance, I've found that resetting the JETOUR maintenance light isn't difficult at all—it's all about finding the right button combination. Take my previous JETOUR X70 for example: when the maintenance light came on, I'd follow this routine: first, insert the key and turn it to the ACC position to power up the dashboard without starting the engine. Second, locate the TRIP button on the dashboard, press and hold it for five seconds until the screen displays 'Maintenance Reset Complete,' and the light disappears. If your model lacks this button, try simultaneously pressing the SET and INFO buttons on the dashboard for a few seconds. The key is to operate patiently—no frantic button mashing. Sometimes if the light persists after a misoperation, check the fuses or refer to the manual for backup methods. I've discussed this in car enthusiast groups—many models can even use an OBD diagnostic tool paired with a phone app for a smarter reset. Learning these tricks saves money and hassle, but if you're truly stuck, visiting a 4S shop with professional equipment is the safer bet. Regularly clearing this light prevents false alarms that might interfere with other system monitoring during daily driving.

[DiTucker]

The operation to reset the JETOUR maintenance light is quite straightforward: Before starting the engine, turn the key to the ON position. Once the dashboard lights up, locate the settings button and hold it for about 15 seconds. The maintenance light will turn off, indicating completion. I've tried it several times and succeeded each time—short and simple steps. Just remember not to perform this while driving; safety first. If the reset doesn’t work, it’s likely a minor wiring or software glitch—restart the car and try again. Don’t ignore the maintenance reminder; it prompts oil changes and inspections, which are good for extending your car’s lifespan.

[JeffreyMarie]

As a family daily driver, I learned a simple method to reset the maintenance light on my Jetour: sit in the car, turn the key to the ON position (dashboard powered but engine off), locate the RESET button on the instrument panel, and hold it for about seven to eight seconds until the light goes off. This trick saves time and money by avoiding unnecessary trips to the repair shop. If it doesn't work the first time, try two or three more attempts—it should eventually succeed. Note that the button location may vary across different Jetour models, possibly on the headlight lever or behind the steering wheel, so checking the manual is wise. I always remind my family to ensure the car is fully stopped before attempting this. After resetting, remember to schedule proper maintenance to keep the vehicle in good condition. These small DIY tips add up over time, helping protect the engine and avoid costly major repairs.

[LaHarrison]

After spending a lot of time on car forums, I've learned there are multiple ways to reset the JETOUR maintenance light: The most common method is turning the key to the ON position and holding the SET button on the dashboard for ten seconds until the light goes off, indicating a successful reset. Some models require pressing a combination of two buttons simultaneously. I've tried this trick myself, and it effectively reset the maintenance reminder system. When sharing this tip, I recommend first confirming your vehicle's model and year, as some newer JETOUR models require selecting the 'Reset' option through the dashboard menu. If something goes wrong, don't force it – it's safer to consult a professional mechanic. Additionally, discussing experiences with other owners reveals that such issues are common but can enhance driving peace of mind when handled properly. Developing good maintenance habits is crucial in daily vehicle care.