How to reset the maintenance reminder light on a 2019 Haval H6?

1 Answers
DiKing
07/29/25 2:48pm
2019 Haval H6 maintenance light reset operation steps are as follows: 1. Turn on the ignition switch to power the car, keeping the engine off; 2. Press the "Reset" button, and the display will show the reset system; 3. Each press of the "Reset" button will switch to the next reset system; 4. Select the maintenance reset system and long-press the "Reset" button for 3 seconds; 5. The instrument display will show a relevant image, indicating the maintenance reset is successful. The purpose of the maintenance light is to record the mileage of important components, serving as a reminder for car owners and maintenance staff. When the maintenance light comes on, it indicates that the car needs maintenance. The maintenance interval for the Haval H6 is every 7,500 kilometers. For maintenance, the Haval H6 enjoys a policy of the first 4 maintenance services being free.
Was this review help?
3
3
Share
More Forum Discussions

Is it necessary to install an engine underguard for a car?

It is necessary to install an engine underguard for a car, especially for vehicles that traverse various road conditions. When driving on mountain roads or during rainy weather, mud can easily adhere to the engine, leading to uneven heat dissipation. Additionally, the engine underguard serves another purpose: it prevents impacts to the engine when driving on uneven surfaces. Frequent direct contact between the vehicle chassis and the ground can negatively affect the engine's lifespan. Generally, it is recommended that car owners opt for an aluminum alloy underguard. Aluminum alloy underguards are superior as plastic ones may get damaged when dragged. Even if an aluminum alloy underguard deforms, it can often be straightened and reused, making its service life longer.
10
0
Share

How many kilometers can a Yamaha Xunying 125 travel on a full tank of fuel?

Yamaha Xunying 125 can travel a range of 250-300 kilometers on a full tank of fuel. There are two methods to save fuel for the vehicle: 1. Shift gears promptly on a manual transmission motorcycle: Shifting gears should not be too early or too late. Generally, you can refer to the engine sound and the tachometer. The engine RPM should be roughly matched with the speedometer. Either excessive throttle or low engine RPM can lead to higher fuel consumption. 2. Avoid driving with a partially engaged clutch: Frequent gear shifting is necessary, but the clutch should be fully disengaged or engaged as much as possible. Additionally, when starting a scooter, the throttle should be increased to medium speed immediately, as scooters use continuously variable transmission (CVT). Only when the engine reaches a certain RPM can the CVT reduce kinetic energy loss and save fuel.
6
4
Share

What Causes High Radiator Temperature?

The reasons for high radiator temperature are: 1. Coolant leakage or insufficient coolant; 2. Malfunctioning cooling fan, where heat generated during high-speed operation cannot be effectively transferred to the antifreeze, affecting heat dissipation and subsequently causing the antifreeze temperature to rise, leading to issues like overheating; 3. Damaged impeller, commonly seen as impeller cracking or detachment from the pump shaft, resulting in slower coolant circulation and increased risk of engine overheating. The car's water temperature reflects the working condition of the cooling system. The engine must operate within an appropriate high-temperature range. Generally, when the engine coolant temperature is around 90 degrees Celsius, the engine reaches its optimal operating state. At this temperature, the combustion chamber is hot enough to fully vaporize the fuel, allowing for better fuel combustion and reduced gas emissions.
15
5
Share

How to fold down the rear seats of a Volvo S60?

Method to fold down the rear seats of a Volvo S60: Open the trunk, pull the handle labeled 'Release' backward, then open the rear door and fold down the rear seats. The Volvo S60 is a mid-size sedan under the Volvo brand, featuring a 4-door, 5-seat sedan body structure, a trunk capacity of 391 liters, and a minimum ground clearance of 147mm. In terms of power, taking the Volvo 2021 S60 T3 Momentum Luxury Edition as an example, it is equipped with a 2.0L inline 4-cylinder turbocharged engine, delivering a maximum power of 120kW and a maximum torque of 265Nm, paired with an 8-speed automatic transmission, and features front-wheel drive.
9
0
Share

What are the differences between BMW 3 Series and 3 Series GT?

The differences between BMW 3 Series and 3 Series GT are as follows: 1. Exterior: The BMW 3 Series GT is a medium-sized hatchback. The new 3 Series GT has body dimensions of 4824*1828*1518mm, with a higher C-pillar compared to the regular 3 Series, a larger trunk area, and a more aggressive exterior design. The BMW 3 Series, on the other hand, is a medium-sized sedan, with the new domestic long-wheelbase version measuring 4753*1811*1455mm. 2. Power: The new BMW 3 Series GT is equipped with a 2.0-liter turbocharged engine across the lineup. The low-power version has a maximum horsepower of 184, a maximum power of 135kw, and a maximum torque of 270N•m. The high-power version has a maximum horsepower of 252, a maximum power of 185kw, and a maximum torque of 350N•m. In contrast, the new 3 Series is only equipped with the low-power version of the 2.0-liter turbocharged engine.
1
2
Share

What Causes No Cold Air from the Air Conditioner?

The reasons for no cold air from the air conditioner are: 1. Refrigerant leakage; 2. Damaged or faulty compressor capacitor, causing the compressor to not work; 3. Four-way valve or compressor high-low pressure gas mixing, the air conditioner works but has no effect; 4. Faulty control board of the indoor or outdoor unit leading to no cooling; 5. Damaged indoor or outdoor fan; 6. Insufficient cooling due to too much or too little refrigerant. Cleaning the car air conditioner plays a significant role in addressing the issue of no cooling. Most cases of no cooling are due to long-term lack of cleaning. The condenser of the air conditioner, which is the outdoor heat exchanger, directly forces heat exchange between the refrigerant inside the tubes and the air outside, thereby achieving the purpose of cooling the air. Excessive dust on the condenser, if not cleaned in time, will accumulate and worsen, leading to poor heat dissipation and reduced cooling efficiency.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.