···
Log in / Register

How to Reset the Maintenance Reminder for Ford EcoSport?

4 Answers
DiAubrey
07/29/25 4:06pm

The method to reset the maintenance reminder for Ford EcoSport is as follows: 1. Turn the ignition switch to the OFF position, do not start the engine. 2. Press and hold the trip reset button 'q' with your finger. 3. Turn the ignition switch to the ON position (start). 4. The mileage display will count down from 10, 9, 8... until it reaches 0. 5. Release the trip reset button 'q', turn off the ignition switch, remove the ignition key, and the maintenance light will go off. Below is some information about the Ford EcoSport: 1. Exterior: The EcoSport inherits Ford's family face and incorporates more youthful and stylish elements. The robust front end paired with bold chrome accents exudes a strong sense of trendiness, while the rear continues the design of the Kuga, with the externally mounted spare tire adding a rugged SUV style. 2. Interior: The EcoSport's interior design is very youthful, with features like the barrel-style instrument cluster, three-spoke steering wheel, and wing-shaped center console all borrowed from the new Fiesta, giving it a sporty feel more akin to a sedan. Based on the editor's experience with the EcoSport, the overall craftsmanship is quite refined, and the button feedback is good, though limited by cost, the materials used still lack some premium feel. 3. Features: The EcoSport is equipped with the SYNC system, jointly developed by Ford and Microsoft, which supports voice control, Bluetooth phone functions, and more. 4. Safety features: It includes 6 airbags, hill start assist, and electronic stability program, while comfort features include automatic climate control, push-button start, and keyless entry.

Was this review help?
3
1
Share
MaryDella
08/15/25 4:24am

I remember when I first drove the Ford EcoSport, I encountered the maintenance reminder light being on and tried to reset it myself but made a mistake. First, ensure the engine is turned off and the key is in the OFF position. Then, locate a small button on the dashboard labeled 'Trip' or 'Reset' and hold it down. Next, turn the key to the ACC position, where the radio turns on but the engine doesn't start, and hold for a few seconds until you see the reminder flash or turn off before releasing the button. Sometimes it takes a couple of tries—I wasn't patient enough to succeed the first time. After resetting, remember to start the car to check if the light has truly disappeared. Doing this regularly can save you the service charge at the dealership, but be gentle and steady to avoid damaging the button. Keeping your car well-maintained ensures it runs longer, saving you both worry and money.

Was this review help?
4
3
Share
Expand All
Duarte
10/12/25 5:46am

After driving the Ford EcoSport for so many years, I've found that resetting the maintenance reminder is actually quite simple. After turning off the engine, just locate the small button near the steering wheel control area and hold it down. Then turn the key to the position where the car is powered on but not started, wait about ten seconds, and the maintenance light will disappear before you release the button. If it fails, it might be due to a faulty button or wiring issues, and you'll need to visit a repair shop. Doing it yourself saves time, especially when you're busy and don't want to wait in line. Keeping up with timely car maintenance increases safety and shows responsibility towards your family. I also make it a habit to check tire pressure and engine oil while I'm at it—safety comes first, don't just stop at resetting the light.

Was this review help?
8
3
Share
Expand All
McMason
11/25/25 6:49am

As an experienced driver, I've encountered the issue of the maintenance reminder not disappearing on my Ford EcoSport. The reset procedure isn't complicated: After turning off the engine, hold down the dashboard button. Turn the key to the ACC position and wait a few seconds until the light goes out before releasing. If it doesn't work the first time, just repeat the process. This is similarly straightforward to other Ford models, but be careful not to make any mistakes to avoid damaging the system. Once completed, just check that the vehicle is functioning properly.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

Can the Audi Q5 still be driven when the EPC light is on?

Audi Q5 can still be driven when the EPC light is on. The EPC light indicates the vehicle's self-check process. If the light remains on after the engine is turned off, it may be due to a dirty throttle body, which should be cleaned promptly. If the EPC light comes on while driving, the driver can first conduct a basic inspection of the vehicle. If the light appears immediately upon starting the car, this is a normal situation as it indicates Audi's automatic vehicle inspection system and can be temporarily ignored. In terms of exterior design, this vehicle features sharp, angular detailing in elements such as the grille and headlights. The consistent use of straight lines throughout the body enhances the visual width of the car, further elevating its overall sporty demeanor.
1
2
Share

What is the starting letter of Yantai license plates?

Yantai license plates start with the letter Lu F, as Yantai belongs to Shandong Province. Here is more information about license plates: 1. The first character of a license plate is a Chinese character representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the province, municipality, or autonomous region. For example: Beijing is Jing, Shanghai is Hu, Hunan is Xiang, Chongqing is Yu, and Shandong is Lu. 2. The second character of a license plate is an English letter: representing the prefecture-level administrative region where the vehicle is registered, which is the letter code for each prefecture-level city, region, autonomous prefecture, or league. Most are ranked by the provincial vehicle management office based on the status of each prefecture-level administrative region: (the letter "A" is the code for the provincial capital, capital city, or the central urban area of a municipality directly under the central government, and the subsequent letters are not ranked in any particular order).
6
1
Share

What transmission is used in the Oshan X7?

Oshan X7 uses two types of transmissions: a 6-speed manual transmission and a 7-speed dual-clutch transmission. The entire Oshan X7 lineup is equipped with a 1.5-liter turbocharged engine, and the dual-clutch transmission is particularly well-suited for use with small-displacement turbocharged engines. Relevant information about the dual-clutch transmission is as follows: 1. The dual-clutch transmission is developed based on the manual transmission. Its structure is similar to that of a manual transmission, with the dual-clutch transmission simply adding an extra set of clutch and shift control mechanism compared to the manual transmission. 2. In a dual-clutch transmission, one clutch controls the odd-numbered gears, while the other clutch controls the even-numbered gears.
7
5
Share

What is the fuel consumption per 100 kilometers for a underbone motorcycle?

Currently, underbone motorcycles mainly have a displacement of 110cc, with a fuel consumption of 1.6-1.8 liters per 100 kilometers. Factors affecting motorcycle fuel consumption: The main factor affecting motorcycle size is the engine, and the size of the engine. At the same time, it is closely related to displacement. Therefore, the larger the motorcycle's displacement, the larger the engine, and the corresponding frame and wheelbase will increase. Motorcycle displacement: Motorcycle displacement is divided into ultra-light displacement below 100cc (50-90cc), light displacement/small displacement (100-150cc), medium-small displacement (200-400cc), large displacement (500-900cc), and super-large displacement above 1000cc.
14
0
Share

What colors are available for the Lexus UX?

Lexus UX is available in 12 colors: Sonic Quartz White, Flare Carnelian, Celestial Blue, Sonic Titanium, Platinum Silver, Black, Mercury Gray Mica, Flare Red, Amber, Dark Mica, Obsidian, and Blue Flame. In terms of interior design, the car's dashboard is tilted towards the driver, reflecting a focus on human-centric experience. The height of the dashboard is lowered, and the width of the A-pillars is reduced, providing the driver with a more open field of vision. Exterior-wise, the front and rear fenders of the car are tightly integrated with the body shape, starting from the spindle grille and extending outward and backward to envelop the entire vehicle. The hood and bumper are seamlessly integrated with the headlights and spindle grille, while the compact rear design contrasts with the flared fenders.
11
4
Share

How to play music from a USB drive in Trumpchi GS7?

Method to play music from a USB drive in Trumpchi GS7: Connect the USB drive to the USB interface, store the songs in the USB drive, but avoid too many formats. The music format recognized by the vehicle's computer is MP3, so you can play the music from your phone. The Trumpchi GS7 is a five-seat mid-size SUV under GAC Trumpchi, with dimensions of 4730mm in length, 1910mm in width, and 1770mm in height, and a wheelbase of 2720mm. In terms of interior, the car features a family-style design, with the center console panel and door handles on both sides using carbon fiber-like decorative panels. It comes with dual circular meters and a 7-inch color LCD screen, and a four-spoke leather-wrapped steering wheel with integrated buttons for cruise control and multimedia functions.
7
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.