How to reset the maintenance light on Roewe RX5?

1 Answers
LaClara
07/24/25 3:50pm
To reset the maintenance light on the Roewe RX5, follow these steps: First, turn off the ignition switch. Then, press and hold both arrow buttons simultaneously, turn on the ignition switch, and after about 3 seconds, release the two arrow buttons. The reset menu will appear, asking if you want to reset. Press and hold the SET (reset) button for more than 3 seconds, then press the MODE button. Finally, turn off the ignition switch. The reset is now complete. Additional information: 1. To reset the maintenance light on the Roewe RX5, you need to use a Roewe-specific diagnostic tool. Before the first maintenance, the settings are pre-configured by the manufacturer. After the first maintenance, the 4S shop will set the next maintenance reminder. If the owner does not perform maintenance at a 4S shop and needs to reset the maintenance light manually, they can purchase an engineering account online, log in to the Banma system in the car's central control, and follow the instructions to reset the maintenance light. 2. The vehicle's onboard computer has a maintenance reminder function. Based on preset mileage or engine operating hours, a maintenance prompt will appear on the dashboard, sometimes accompanied by a sound alert. This prompt can be set at a 4S shop by connecting to a diagnostic computer or directly on the vehicle. After maintenance, the prompt can be manually canceled to reset for the next cycle. If the maintenance light is not reset, the onboard computer cannot record the mileage for your next maintenance.
Was this review help?
8
4
Share
More Forum Discussions

Why Should Vehicles from the Right Have the Right of Way?

According to the traffic safety laws, vehicles from the right should have the right of way at intersections without traffic signals. Below are the precautions for right-turning vehicles: 1. Penalties: If there is a dedicated right-turn lane, vehicles must not use other lanes to turn right. If a vehicle turns right from a straight lane during three red lights, it will be automatically captured by traffic cameras and penalized for running a red light, resulting in points deduction and fines. 2. Reminders: Always observe road signs and avoid relying on memory, especially in unfamiliar areas. Some places may prohibit right turns or require stopping on red to alleviate traffic pressure and divert vehicles, but clear signs will be provided. 3. Yielding to Pedestrians: Always yield to pedestrians and be aware of surroundings. While turning right, watch for pedestrians and electric scooters, slow down, and wait for them to pass before proceeding.
20
5
Share

Can tires with tread cracks still be used?

Whether tires with tread cracks can still be used depends on different situations: 1. They can be used if fine cracks appear on the local surface due to running over objects like stones; 2. They cannot be used if cracks appear on the tire sidewall due to external impact or scratches; 3. They cannot be used if the entire tire is covered with cracks due to aging. Methods for tire maintenance include: 1. Regularly clean stones from the tire tread grooves; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment; 6. Be mindful of driving habits, choose road surfaces carefully while driving, avoid objects that can puncture or scratch tires, and steer clear of chemical spills that may corrode tires.
16
1
Share

What Are the Reasons Why Tire Pressure Does Not Display After Inflating a Car?

The reasons why tire pressure does not display after inflating a car are: 1. The battery of the tire pressure monitoring module is depleted; 2. The inspection port of the tire pressure monitoring module is blocked by foreign objects, preventing the module from detecting; 3. Pairing failure; 4. The tire pressure monitoring module is damaged. The solutions are: 1. Replace the tire pressure monitoring module; 2. Re-pair the module; 3. Clean any foreign objects in front of the tire pressure monitoring module. The working principle of tire pressure monitoring is: A built-in sensor is installed on the tire hub, which includes a bridge-type electronic pressure sensing device to detect air pressure, converting the pressure signal into an electrical signal, and transmitting the signal via a wireless transmitter.
6
5
Share

What is the cleaning method for matte-feel car paint?

The cleaning method for matte-feel car paint is: 1. Use clean water or car wash liquid to rinse off the dirt on the car body first; 2. Apply pre-soaked clay bar onto the surface and gently rub the paint with a microfiber towel until the paint surface regains its smoothness. The reasons for matte-feel car paint include paint aging, corrosion, and paint damage. Methods to maintain car paint include: 1. Wash the car after the engine has cooled down; 2. Minimize exposure to direct sunlight; 3. Clean stains on the car body promptly; 4. Rinse the car with clean water after rain to prevent acid rain corrosion; 5. Apply wax or glaze coating regularly.
17
4
Share

Where is the Mitsubishi engine produced?

Mitsubishi engines are produced in Japan. The main components of an engine include: 1. Engine block; 2. Crankshaft and connecting rod mechanism; 3. Valve train and intake/exhaust system; 4. Fuel supply system and governor; 5. Starting device; 6. Cooling system; 7. Lubrication system. The function of an engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning the fuel in a sealed cylinder, causing gas expansion that pushes the pistons to perform work. Engine maintenance methods include: 1. Using qualified engine oil; 2. Using qualified coolant/antifreeze; 3. Regularly cleaning radiator scale; 4. Regularly removing engine carbon deposits; 5. Periodically replacing the three automotive filters; 6. Maintaining appropriate RPM ranges.
4
1
Share

What is the method to reset the maintenance light on the GAC Honda Vezel?

The method to reset the maintenance light on the GAC Honda Vezel is: 1. Turn on the ignition switch without starting the engine; 2. Press and hold the 'A' button on the instrument panel while stepping on the brake pedal; 3. After three dots appear in the prompt character position on the instrument panel, maintain this for three seconds; 4. After three seconds, release the 'A' button and the brake pedal; 5. Turn off the ignition switch for three seconds, then turn it back on. Taking the 2020 GAC Honda Vezel as an example, it is a compact SUV with body dimensions of: length 4328mm, width 1772mm, height 1605mm, and a wheelbase of 2610mm.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.