How to Reset the Maintenance Light on Peugeot 3008?

1 Answers
OElliott
07/29/25 3:19pm
Peugeot 3008 maintenance light reset method: 1. Turn off the ignition switch of the Peugeot 3008; 2. Press and hold the maintenance mileage reset button; 3. Press the single trip meter reset button on the combination instrument panel, and the odometer display will start the countdown; 4. When the display shows "equal to 0", it means the maintenance indicator light has been reset; 5. After releasing the reset button, the wrench symbol (maintenance indicator light) will turn off. The Peugeot 3008 has dimensions of 4435mm in length, 1840mm in width, and 1652mm in height, with a wheelbase of 2613mm. It is a 5-door, 5-seat SUV, equipped with a 6-speed automatic transmission and a 1.6T L4 turbocharged engine.
Was this review help?
5
1
Share
More Forum Discussions

How to Remove the Navigation System in Kia K3?

The method to remove the navigation system in Kia K3: Remove the decorative panel, unscrew the screw on the left side, pry out the clips of the decorative strip, and then disconnect the wiring harness to complete the removal. Below is more information about the Kia K3: 1. The K3 is a brand-new compact family sedan in the Kia lineup. Upon its launch, it gained high popularity among young consumers due to its avant-garde and stylish design. 2. The all-new Kia K3 by Dongfeng Yueda Kia made its debut at the Shanghai Auto Show and was officially launched on May 16, 2019. It features the same powertrain as the Hyundai Elantra, including 1.6L and 1.8L engines. The all-new K3 is equipped with intelligent configurations such as the Smart Connectivity System 2.0 and the DRIVEWiSE Intelligent Safety Assist System.
4
4
Share

What are the working processes of ABS?

The working process of ABS includes stages such as conventional braking, brake pressure maintenance, brake pressure reduction, and brake pressure increase. The anti-lock braking system performs pulsed braking at a frequency of 6 to 10 times per second, alternating between braking and releasing, using electronic intelligent control instead of manual control to prevent wheel lock-up. This ensures the wheels always obtain maximum braking force while maintaining steering flexibility. Additional information: 1. ABS working principle: It consists of control devices and ABS warning lights. In different ABS systems, the structural form and working principle of the brake pressure regulation device may vary, and the internal structure and control logic of the electronic control device may also differ. 2. The function of the ABS system: The anti-lock braking system can improve the safety factor of a vehicle during emergency braking. In other words, cars without ABS are more prone to wheel lock-up when emergency braking is applied in critical situations, meaning the steering wheel cannot be turned, thereby increasing the risk factor and potentially leading to severe consequences.
9
5
Share

How to Choose a Car Armrest Box?

Here are the ways to choose a car armrest box: 1. Material selection: First, consider whether you can accept screwing into the car body. If yes, you can choose plastic or wood-density board materials; if not, opt for wood-density board materials. 2. Design selection: Decide on the external design and functionality you prefer. Plastic armrest boxes often have unique and novel designs that look attractive, while wood-density board materials offer a more integrated and stable design, appearing more conventional but steadier, with no anomalies during driving. 3. Storage space selection: Generally, wood-density board materials provide larger storage space than plastic ones. However, some plastic armrest boxes have significantly improved storage capacity, surpassing certain wood-density board models, though they are more expensive and should be made from virgin materials. 4. Price considerations: In the market economy era, you get what you pay for. Compared to retail prices, online sales prices offer certain advantages.
4
3
Share

What is the fuel consumption of the Cadillac CT4?

Cadillac CT4 has a fuel consumption of 9.6 liters per 100 kilometers. Here are some related introductions about fuel consumption: Factors affecting fuel consumption: Potholes on the road will consume more fuel, and driving in low gear for a long time will also increase fuel consumption. Placing too heavy items in the luggage compartment will increase fuel consumption. Driving at high speed in low gear will consume more fuel, and not maintaining the engine will increase fuel consumption. Abnormal engine ignition systems also have a significant impact on fuel consumption, such as inaccurate ignition timing, leaking high-voltage wires, and spark plug carbon deposits causing weak ignition, all of which will reduce engine combustion efficiency and increase fuel consumption. Insufficient tire pressure will lead to increased fuel consumption. Neglecting car maintenance will also result in increased fuel consumption. Methods to reduce fuel consumption: Maintain a constant speed while driving and avoid sudden braking or acceleration. Regularly maintain the vehicle.
9
1
Share

What brand is the engine of the Hongqi H5?

CA4GC18TD-30 is the engine model used in the Hongqi H5, with a maximum horsepower of 197 hp, a maximum power of 145 KW, a maximum power speed of 2000 rpm, and a peak torque of 320 N.m. The engine of the Hongqi H5 is produced by Tianjin FAW itself, and the CA4GB15TD30 engine is domestically made. For the daily maintenance of the Hongqi H5's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the requirements specified by the manufacturer. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing dirt back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
18
3
Share

What is the real fuel consumption of the Haval F5?

The official combined fuel consumption of the Haval F5 is 6.8L, while the actual fuel consumption reported by owners is 8.6L. Depending on the driving conditions and habits, the fuel consumption of the Haval F5 generally remains between 8-10L, which is considered average. Here are some methods to reduce fuel consumption: 1. Use gears appropriately: Many drivers tend to keep the gear in D (Drive) mode all the time. While this is fine on flat roads, using D mode on uphill slopes increases engine load and fuel consumption. Instead, use lower gears or sport mode when climbing hills, as the transmission will shift to a lower gear, reducing engine load. 2. Shift to neutral at red lights: Many drivers keep the car in drive mode and hold the brake at red lights for convenience, but this habit can inadvertently increase fuel consumption. 3. Avoid sudden acceleration or braking: Try to maintain a steady speed and brake smoothly, as this helps reduce fuel consumption.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.