How to Reset the Maintenance Light on Peugeot 2008?
2 Answers
Peugeot 2008 maintenance light reset steps are as follows: 1. First, turn off the ignition switch of the Peugeot 2008, then press and hold the trip meter reset button; 2. Press the start button, and the odometer display will begin the countdown; 3. When the display shows "=0", it indicates that the maintenance light has been successfully reset; 4. After releasing the reset button, the wrench symbol (maintenance indicator light) will turn off. More information about the Peugeot 2008 maintenance light: 1. The Peugeot 2008 system can appropriately shorten the maintenance interval mileage and time based on the owner's driving habits. 2. When the maintenance interval mileage is between 1000~3000km, the wrench symbol (maintenance indicator light) next to the odometer will light up for 5 seconds after ignition. However, if there has been no maintenance for more than 6 months or the distance to the maintenance mileage is less than 1000km, the maintenance light will remain lit.
I researched this when I was driving a Peugeot 2008 before. Don't panic when the wrench light comes on. Just turn the key to the ignition-on position without starting the engine. Then hold down the scroll wheel button on the right side of the steering wheel until the 'Maintenance' menu appears on the screen. Use the scroll wheel to select the reset option and press to confirm. The whole process takes just 30 seconds - doing it yourself saves a trip to the dealership. Just remember to reset it after the actual maintenance is done, don't delay the oil change.