How to reset the maintenance light on Karry K50?
3 Answers
The method to reset the maintenance light on Karry K50 is as follows: 1. Turn off the ignition switch to cut off the power supply to the car; 2. Press and hold the reset button on the right side of the instrument panel; 3. Turn the ignition switch to the 'on' position; 4. Continue holding the reset button for a few seconds before releasing it; 5. Press and hold the reset button again and rotate it to the right once. Taking the 2019 Karry K50 as an example, it belongs to the MPV category, with body dimensions of: length 4501mm, width 1760mm, height 1790mm, a wheelbase of 2755mm, a fuel tank capacity of 45l, and a curb weight of 1230kg.
As a DIY car enthusiast, I find it quite simple to handle the maintenance light on the Karry K50: After turning off the engine, hold down the reset button on the right side of the dashboard, then turn the key to the ON position without starting the engine. Wait for about 10 seconds, and the maintenance light will go off—just release the button and you're done. The first time I tried, I failed because I pressed the wrong button, but later I checked the manual to find the exact spot. Now, I always reset the light promptly after changing the oil and filter to avoid its annoying flashing reminders. Saving on maintenance costs is great, but make sure you actually complete the maintenance before resetting, or you might risk your car's condition. DIY is fun, but beginners should ask a friend for help. Remember, regular maintenance keeps your car running smoothly.
As an auto repair technician, helping customers reset the maintenance light on the Karry K50 is a routine task. Method: Fully turn off the engine, remove the key to the OFF position, press and hold the small triangular button on the dashboard (refer to the user manual for exact location), then turn the key to the ACC position and wait 5-8 seconds. Release the button when the light goes off. Be precise during operation—not a second early or late. I remind everyone that the maintenance light is a signal for required service; always check if oil, filters, etc. have been replaced before resetting. Common mistakes include not holding the button firmly or selecting the wrong position—we can fix it in a second at our shop. Safety first—never delay maintenance. After resetting, take a test drive to confirm.
