How to reset the maintenance light on JAC Refine S3?

[MaddoxDella]

About the specific steps to reset the maintenance light on JAC Refine S3 are as follows: 1. Turn on the ignition switch, press and hold the reset button with one hand, and turn off the ignition switch with the other hand. 2. Keep holding the reset button until the clock and mileage on the dashboard completely disappear, then release the button. 3. Press and hold the reset button again with one hand, then turn on the ignition switch again. At this time, the maintenance reminder on the dashboard will be flashing. Keep holding the reset button without releasing it until the maintenance reminder stops flashing, then release the button. 4. Turn on the ignition switch or start the vehicle again to check if the reset was successful.

[AriannaMarie]

For the maintenance light reset of the JAC Refine S3, as a veteran mechanic with 20 years of experience, the method is actually quite simple. First, park the car and turn off all power. Then locate the 'TRIP' button on the dashboard, which is usually the trip meter adjustment button. Press and hold it firmly, then turn the key to the ON position (the position where the dashboard lights up but the engine doesn't start), and continue holding for about 10 seconds. You'll see the maintenance indicator light flash and then turn off, indicating the reset is complete. If it doesn't work, it might be due to button contact issues or system errors, requiring a check of the fuses or a visit to the 4S store with specialized equipment. The maintenance light is a reminder for regular servicing; after resetting, don't slack off. Generally, it's recommended to change the oil and perform inspections every 5,000 kilometers. Ensure you operate in a safe environment, and never attempt this while driving.

[SanJulia]

I've been driving my JAC Refine S3 for several years, and here's my experience with resetting the maintenance light: After turning off the car, don't move anything. Press and hold the TRIP button on the dashboard. Turn the key to the ACC position (just until the lights come on), and keep holding the button for 5-10 seconds until the maintenance light goes off. Remember not to start the engine. The first time I tried, I was in a hurry and pressed the wrong spot, but I quickly corrected it. This light is like a thoughtful little assistant, reminding you to service on time – it feels much better after resetting. Regular maintenance like oil and filter changes can extend your car's lifespan, so don't wait for problems to arise. The whole process takes less than a minute and is completely safe.

[LeJuniper]

Resetting the maintenance light for JAC Refine S3 is simple in just a few steps: After parking and turning off the engine, press and hold the TRIP button on the dashboard. Turn the key to ON (without starting the engine), continue holding for 10 seconds until the light goes off. Do not interrupt the operation, and confirm by starting the vehicle after completion. When the maintenance light is on, it means it's time for a reminder. After resetting, make sure to perform maintenance on time.

[StAmir]

When resetting the maintenance reminder light, safety is paramount. Turn off the engine and engage the parking brake. Press and hold the TRIP button on the JAC Refine S3 dashboard, turn the key to the ON position, and wait approximately 10 seconds until the indicator light turns off. Stay focused during the operation and ensure there are no obstacles around. If the light doesn't turn off, it may indicate a button malfunction or system failure—avoid repeated forced attempts and drive directly to a repair shop for inspection. Resetting the maintenance light doesn't involve replacing parts; it only resets the reminder system. It's recommended to follow the owner's manual for regular maintenance to keep the vehicle in optimal condition.

[LeLiam]

As a car DIY enthusiast, I always enjoy delving into the details. To reset the maintenance light on the Refine S3: After turning off the engine, press and hold the TRIP button, then turn the key to the ON position and hold for 10 seconds until the light goes out, indicating success. There may be slight variations for different model years, such as requiring a longer press time. After trying, you can use a mobile app to monitor vehicle data and verify the system reset. The maintenance light mechanism is triggered by the odometer, so continue observing the odometer changes after resetting. Sharing this method with friends for similar procedures on other JAC models is also quite practical.