How to Reset the Maintenance Light on Dongfeng Fengguang ix5?

[BennettLynn]

Turn off the ignition switch, press and hold the trip meter reset button, then turn on the ignition switch. The mileage display will begin counting down. When the display shows "=0", release the button, and the wrench-shaped maintenance indicator light will turn off, indicating the reset is complete. Do not disconnect the battery cable immediately after the reset operation. If necessary, lock the vehicle and wait for 5 minutes to allow the reset operation to take effect before proceeding. The Fengguang ix5 is equipped with a 1.5T engine, model SFG15T. Below are the relevant details: 1. Engine: The SFG15T engine has an actual displacement of 1498ml, with 4 cylinders arranged in an L formation, and features turbocharged intake. The SFG15T engine reaches its maximum power at 5600 RPM and maximum torque at 4000 RPM, with a DOHC valve train. 2. Output Power: The low-power version of the 1.5T engine has a maximum output of 110 kW and a maximum torque of 220 N·m, with a combined fuel consumption of 7.5L/100km as published by the MIIT. The high-power version of the 1.5T engine has a maximum output of 132 kW and a maximum torque of 270 N·m, with a combined fuel consumption of 7.2L/100km as published by the MIIT.

[MacEmmett]

I usually drive a Dongfeng Fengguang ix5, and I've done the maintenance light reset quite a few times. The process is pretty simple: First, turn off the engine, then turn the key to the ON position without starting the engine—the dashboard will light up. Next, find the TRIP button near the steering wheel or on the dashboard, press and hold it for about ten seconds, and the maintenance light will start flashing and then turn off, successfully reset. Remember, always do this after an oil change or proper maintenance, or the light might mislead you into thinking there's a problem with the car. Don’t skip maintenance—engine repairs due to wear are much more expensive. I recommend car owners regularly check their maintenance records, and the manual also has specific guidelines, but for the ix5, this method usually works. Doing it yourself saves a lot of money and is convenient.

[VonJayden]

As someone who frequently tinkers with cars, I've researched the maintenance light reset procedure for the ix5. The basic method is: After turning off the engine, rotate the key to the ON position without starting the car. The dashboard illumination indicates it's in the correct state. Then operate the MODE or TRIP button on the dashboard, holding it for several seconds until the light flashes and turns off. The process can be completed in just 2-3 minutes if done quickly. The maintenance light is designed to remind you to change the oil filter, and regular resetting ensures accurate reminders. If you can't manage it yourself, don't force it - dealerships will adjust it for free. I've also found that the operation tends to fail when the battery is weak, so it's safer to check the battery level first. Maintenance intervals are approximately every 5,000 kilometers - don't overlook these details to keep your car running longer and safer.

[LaElla]

Resetting the maintenance light on my ix5 is just a few simple steps. Turn the key to ON after shutting off the engine, but don't start the car. Find the dashboard button and hold it for ten seconds until the light goes off—that means it's reset. Do this immediately after maintenance, don't delay. The maintenance light is a reminder for timely service, so don't ignore it. The manual has detailed instructions for the most accurate guidance.

[StRobert]

The key to resetting the maintenance light lies in safe operation. With over a decade of driving experience, here's how I handle the ix5: turn the key to the ON position without starting the engine. Then press and hold the TRIP or similar button for about 10 seconds until the light stops flashing, indicating completion. This must be done after proper maintenance; otherwise, you might miss genuine issues. Don't attempt it yourself if unsure—visit a professional shop to avoid damaging the instrument system. The maintenance light serves to prevent engine failures, and timely oil and filter changes can save money. I recommend making light resetting a habit for worry-free and longer-lasting vehicle performance.

[DelAxel]

Resetting the maintenance light is actually not difficult. My experience with the ix5 tells me: turn the ignition key to ON, after the dashboard lights up, press and hold the TRIP button for ten seconds to reset the light. After resetting, the maintenance light accurately reminds you to change the oil after about 5,000 kilometers. Remember not to delay, ignoring it may lead to expensive engine wear repairs. The ix5 manual is the best reference, sometimes minor model differences may require adjustments. Maintenance cycles are crucial, and I deeply understand that regular maintenance extends the car's lifespan. Regular checks make it more worry-free.