How to reset the maintenance light on Citroen C3?

Is It Necessary to Install a Radiator Guard?

Radiator guard is necessary to install because a radiator with a protective guard can prevent leaves, insects, sand, and stones from entering the radiator, while also ensuring the radiator is not affected by external impurities, thus providing protection. The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator to dissipate the heat, and then returns to the water jacket to circulate, achieving temperature regulation. The radiator is a crucial part of a water-cooled engine. As an important component of the heat dissipation circuit in a water-cooled engine, it absorbs heat from the cylinder block to prevent engine overheating. Due to the high specific heat capacity of water, the temperature rise after absorbing heat from the cylinder block is not significant. Therefore, the engine's heat is transferred through the liquid circuit of the coolant, using water as the heat carrier. The heat is then dissipated through large-area cooling fins via convection to maintain the engine's optimal operating temperature.

3

Share

How to Shift an AT Transmission?

AT transmission shifts through planetary gear mechanisms, automatically adjusting speed based on throttle pedal position and vehicle speed changes. The driver controls the vehicle's speed by operating the accelerator pedal. Transmission types include hydraulic automatic transmissions, hydrostatic automatic transmissions, electric automatic transmissions, stepped mechanical automatic transmissions, and continuously variable mechanical automatic transmissions. Also known as gearboxes, transmissions consist of gear transmission mechanisms and control mechanisms. They are automotive components used to alter the engine's rotational speed and torque, capable of fixing or changing the output/input shaft transmission ratio in distinct gear steps.

2

5

Share

Will I Receive a Notification for Traffic Violations on My Car?

You will receive a notification for traffic violations on your car, typically via SMS within 3 to 15 days. If the vehicle owner has not registered a mobile phone number with the DMV, they can log in to the vehicle registration traffic management website to check for violation information after 13 days. According to regulations, traffic violation information must be reviewed and entered into the violation system within 10 days after the violation occurs. The system must upload the information online for violators to query after 3 days. Other violations that involve point deductions require in-person handling at a service window. Methods to check vehicle violations: Visit the service halls of traffic police branches in various districts and counties to use touch-screen terminals for inquiries. Log in to the public service websites of municipal public security traffic management bureaus, locate the vehicle violation query section, enter the license plate number and vehicle engine number, then click to query. Call the inquiry hotline. Send a text message to check for violations. Ways to avoid vehicle violations: Familiarize yourself with traffic laws. Master driving skills to clearly spot traffic police and speed cameras. Try to avoid speeding, and consider using safety driving systems like GPS navigation devices for speed limit alerts.

14

3

Share

What is the fuel consumption of the BJ40 off-road vehicle?

The BJ40 off-road vehicle has 15 models currently on sale. Among them, the Beijing BJ40-2022-2.0T-Automatic Four-Wheel Drive Official Edition, Champion Edition, 2020-2.0T-Automatic Four-Wheel Drive City Hunter Edition Supreme, and Xia Ke Edition, equipped with a 224 horsepower engine, have an NEDC fuel consumption of 9.9L per 100km. The 2020-2.0T-Automatic Four-Wheel Drive Tribute 2020 Edition Xia Ke, Supreme, Automatic Two-Wheel Drive City Hunter Edition Pioneer, and Xia Ke Edition, equipped with a 224 horsepower engine, have an NEDC fuel consumption of 9.4L per 100km. The 2022-2.3T-Automatic Four-Wheel Drive Excellence Edition, 2021-2.3T-Automatic Four-Wheel Drive Blade Hero Edition Supreme, and 2020-2.3T-Automatic Four-Wheel Drive Rainforest Cross Edition, equipped with a 231 horsepower engine, have an NEDC fuel consumption of 10.3L per 100km. The 2021-2.0D-Automatic Four-Wheel Drive Blade Hero Edition Xia Ke, Xia Ke Edition (front and rear electronic control locks), and Pioneer Edition, equipped with a 163 horsepower engine, have an NEDC fuel consumption of 8.5L per 100km. The 2021-2.3T-Manual Four-Wheel Drive Blade Hero Edition Pioneer, equipped with a 211 horsepower engine, has an NEDC fuel consumption of 9.7L per 100km. The fuel tank capacity of different BJ40 off-road vehicle models is the same. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 224 horsepower engine have a fuel tank capacity of 75L, and the distance that can be covered with a full tank is 75/9.9*100=758km and 75/9.4*100=798km. Models equipped with a 231 horsepower engine have a fuel tank capacity of 75L, and the distance that can be covered with a full tank is 75/10.6*100=708km.

19

2

Share

How often should the coolant in the Leiling be replaced?

The coolant in the Leiling should be replaced every two years or 40,000 kilometers. Coolant prevents the freezing of the cooling liquid during cold winter parking, which could otherwise crack the radiator and damage the engine cylinder block. Its full name is antifreeze coolant. Many people think that coolant is only used in winter, but in fact, it should be used all year round. The Leiling is a compact 4-door, 5-seater sedan with dimensions of 4640mm in length, 1780mm in width, and 1455mm in height, and a wheelbase of 2700mm. This car is equipped with a 1.2T turbocharged engine and a CVT continuously variable transmission, delivering a maximum power of 85 kW and a maximum torque of 185 Nm, with a front-wheel drive system.

2

1

Share

How to Measure Cylinder Pressure?

To measure cylinder pressure, follow these steps: 1. Use compressed air to clean the dirt around the spark plugs, then remove all spark plugs. For gasoline engines, also disconnect the ignition system's secondary high-voltage wires and securely ground them to prevent electric shock or fire. 2. Insert the conical rubber tip of the dedicated cylinder pressure gauge into the spark plug hole of the cylinder being measured, ensuring it is properly aligned and tightly sealed. 3. Fully open the throttle (and the choke if equipped), then use the starter to rotate the crankshaft for 3 to 5 seconds (at least 4 compression strokes). Stop rotating once the pressure gauge needle indicates and maintains the maximum pressure reading. 4. Remove the pressure gauge, record the reading, and press the one-way valve to reset the gauge to zero. Repeat this process for each cylinder, measuring each cylinder at least twice. Calculate the arithmetic mean of the measurements for each cylinder and compare the results with standard values to analyze and assess the cylinder's working condition.

17

5

Share

How to reset the maintenance light on Citroen C3?

Is It Necessary to Install a Radiator Guard?

How to Shift an AT Transmission?

Will I Receive a Notification for Traffic Violations on My Car?

What is the fuel consumption of the BJ40 off-road vehicle?

How often should the coolant in the Leiling be replaced?

How to Measure Cylinder Pressure?

Does a new car need an annual inspection in the third year?

Which mode should be used for normal driving of Haval H9?

What is the speed limit and distance requirement when visibility is below 100 meters?

What is the fuel consumption of smart?