···
Log in / Register

How to Reset the Maintenance Light on a Magotan?

3 Answers
VanNoah
07/29/25 6:58pm
To reset the maintenance light on a Magotan, follow these steps: 1. First, press the small wrench button on the dashboard with your left hand, then turn on the ignition with your right hand. After that, release the small wrench button with your left hand and press the minute adjustment button on the time setting. 2. Turn off the ignition, remove your left hand from the time button, and start the engine. The maintenance reminder will then disappear. Here is some related information about the Magotan: 1. The Magotan is a mid-size car launched by FAW-Volkswagen, with dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, and a wheelbase of 2871mm. 2. It is equipped with either a 1.4T or 2.0T turbocharged engine, with maximum power outputs of 110kw and 137kw respectively, paired with a 7-speed dual-clutch transmission.
Was this review help?
2
3
Share
Jeffrey
08/14/25 12:51pm
I've been driving a Volkswagen Magotan for several years, and resetting the maintenance light is quite simple. After turning off the engine, switch on the ignition but don't start the car. Then press and hold the small button on the dashboard—usually the one for resetting the mileage—for about ten seconds until the maintenance reminder disappears before releasing it. I've used this method several times, and it works every time. There's no need to waste money at the dealership. Regular maintenance is crucial for your car, and the light serves as a reminder to change the oil or check the brake pads. Resetting it yourself not only saves money but also helps you get familiar with your car's details and extends its lifespan. I think all car owners should learn these small skills—it boosts confidence and makes driving more hassle-free.
Was this review help?
18
0
Share
Expand All
KingDella
10/15/25 2:28am
I drive my Magotan to work every day, and the maintenance light really annoys me when it pops up. The operation isn't complicated: turn off the car, twist the key to the power-on state, wait for the dashboard display to light up, then immediately press and hold the reset button for about ten seconds until it turns off. If you can't manage it, just go to the 4S shop and let them help you out. Don't keep putting it off—if the light stays on too long, it'll distract you and make driving uneasy. Saving money is key—doing it yourself can save you tens of dollars in repair fees. By the way, after resetting the maintenance light, check your car's condition to avoid any follow-up issues that might affect your trip.
Was this review help?
15
0
Share
Expand All
More Forum Discussions

What does UDS mean?

UDS is a unified diagnostic service, serving as a standard reference protocol for diagnostic services. For example, it specifies what commands should be sent to the ECU to read fault codes or data streams. UDS analyzes current automotive issues, and this protocol is widely used in automotive electronics today. OBD is an industry standard formed around the concept of monitoring real-time vehicle emissions for after-sales purposes, while UDS is a unified specification for diagnostic services. UDS provides a basic framework for diagnostic services, allowing automakers and component suppliers to implement parts of it or customize some private diagnostic services based on actual needs.
19
2
Share

How to Solve Car Jerking?

Car jerking can be resolved by the following methods: 1. Check the temperature of the transmission and the transmission cooling system. 2. Replace the transmission fluid, which should be changed every 2 years or 40,000 kilometers. 3. Inspect the internal valve body of the transmission for any damage that may require replacement. 4. Check the engine valves and intake pipe for carbon buildup that needs cleaning. Below is relevant information: The causes of car jerking include: 1. Engine oil passage blockage. 2. Dirty transmission fluid blocking the oil passages. 3. Damaged transmission solenoid valve. 4. Forgetting to release the handbrake. 5. Irregular wear of the clutch. 6. Damaged solenoid valve. 7. Some engine cylinders not working. 8. Poor-quality fuel with low volatility.
12
1
Share

Which button in the car is the heater button?

To turn on the car heater, press the AUTO button. The heater switch is usually represented by a thermometer icon or buttons with blue and red zones on either side. The red zone indicates heating, while the blue zone indicates cooling. By rotating the knob, the temperature increases in the red zone and decreases in the blue zone. Here's some relevant information: 1. Precautions when using car heating: Avoid directing warm air straight at the head, as prolonged exposure can cause driver fatigue and affect driving safety. 2. The method to quickly raise the interior temperature is: First start the engine for preheating, wait until the engine temperature gauge needle reaches the middle position, then turn on the heating air conditioning. Simultaneously set the air circulation to external circulation to expel cold air from the vehicle. After 2-3 minutes, switch the air circulation to internal circulation.
10
0
Share

What Factors Determine the Ignition Advance Angle?

Engine ignition advance angle is determined by factors such as engine speed, load, and fuel type. The most significant factors affecting the ignition advance are speed and the combustion rate of the air-fuel mixture. The ignition advance angle refers to the spark plug firing before the piston reaches the top dead center of the compression stroke, igniting the combustible air-fuel mixture in the combustion chamber. Below is relevant information: 1. The functions of the ignition advance angle are: (1) Ensuring the energy generated by the combustible air-fuel mixture is effectively utilized. (2) Improving the engine's output power. 2. Methods to verify the ignition advance angle: (1) Start the engine and repeatedly press the accelerator pedal. If the engine feels powerful and there are no abnormal knocking sounds, it indicates the ignition advance angle is appropriate. (2) Increase the engine speed and confirm the ignition advance angle by observing the movement direction of the timing marks.
4
0
Share

Does Sport Mode Damage the Car?

Sport mode does not damage the car. In sport mode, the transmission can shift freely, but the shift timing is delayed. The engine maintains higher RPMs for a longer period, allowing the car to operate at lower gears with higher RPMs for extended durations, thereby delivering greater torque output. Below is relevant information: The correct way to use sport mode is: 1. Shift the gear to D mode, then push the gear lever to the right, and the transmission will enter sport mode first. 2. Use the forward and backward push of the gear lever to shift gears. Pushing forward shifts up, while pushing backward shifts down. 3. To switch back to automatic mode, simply push the gear lever to the left to the D position to complete the shift up or down.
6
5
Share

What is the Difference Between a Filter and a Filter Element?

The differences between a filter and a filter element are as follows: 1. Different functions: The function of a filter is to remove metal particles and impurities from the specialized oil in an air compressor, ensuring the cleanliness of the oil circulation system and protecting the safe operation of the main unit; the function of a filter element is to remove dust and impurities from the air inhaled by the air compressor, ensuring the service life of the oil-gas separation core and the oil. 2. Different filtration methods: Filters use sponge or paper grid filtration; filter elements use ultra-fine fibers or adsorption cotton filtration. A filter refers to an accessory that filters impurities or gases through filter paper. A filter element is used to purify contaminated air to the state required for production or daily life, achieving a certain level of air cleanliness.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.