How to Reset the Maintenance Light on a Lexus ES200?

1 Answers
BriannaLee
07/25/25 7:29am
The purpose of the maintenance light is to record the usage time of important components. Once a certain mileage is reached, the owner should replace the components in a timely manner. After successful replacement, the car's maintenance light needs to be reset. The specific steps to reset the maintenance light on a Lexus ES200 are as follows: 1. Turn off the ignition switch. 2. Press and hold the trip meter reset button on the car's dashboard. Make sure to keep the button pressed. 3. Turn the ignition switch back on. 4. The odometer will start counting down. When the display shows 0000.0, immediately release the button, indicating a successful reset.
Was this review help?
14
2
Share
More Forum Discussions

What Can Be Used to Detect a Lost Car Key?

If you can't find your car key, it cannot be detected unless you purchase a smart key finder online. This device consists of a finder and a receiver that communicate via Bluetooth signals. Simply attach the receiver to your key, and when the key is lost, press the designated button on the finder. The receiver will emit a beeping sound, allowing you to locate the key by following the sound. More details are as follows: 1. What to do if you lose your car key: The first thing to consider is the spare key. Most cars come with two keys—a primary key and a spare key. Note that the spare key should not be kept inside the car but in a safe place at home. Otherwise, if you lose the primary key and the spare key is also in the car, you will need to call a locksmith. 2. Anti-theft chip keys: Keys with anti-theft chips are more advanced. In addition to the mechanical part of the key matching, the key must also be reprogrammed so that the code on the key chip matches the code of the engine immobilizer system to start the engine. This type of key is more complex to duplicate. Large repair shops can handle it, and the cost is relatively lower. For professional service, you can go to a 4S dealership, though it may take longer.
9
3
Share

What causes the abnormal noise in Audi A3 shock absorbers?

Audi A3 shock absorber abnormal noise may be caused by the shock absorber itself leaking oil or bending, abnormal aging or wear of the shock pressure bearing, deformation of the shock spring, damage to the balance rod rubber sleeve, loose fixation of the shock absorber, or gaps in the connecting ball joint, etc. Deformation of the shock spring: Due to the structure of the vehicle's shock absorber, the entire shock absorber is compressed when the vehicle passes over bumpy roads, thereby compressing the external spring. However, after the vehicle passes the bumpy section, the spring's elasticity will reset the shock absorber. During the compression and resetting process of the shock absorber, a hissing or squeaking sound may accompany, which is a normal phenomenon. Any other abnormal noises from the shock absorber should also be taken seriously and addressed. Loose fixation of the shock absorber: Abnormal noise from the shock absorber can be caused by loose fixation, as long-term vibrations during driving can loosen the fixing nuts. Tightening the fixing nuts can solve this issue. Wear of the rubber bushings at both ends of the shock absorber can create play at the fixing points, causing noise during driving. Replacing the rubber bushings can eliminate the fault. Lack of oil in the shock absorber can also cause abnormal noise. Check for oil leakage; if there is no leakage, add the specified amount of shock absorber oil as required.
19
2
Share

How tall is the Cullinan?

The Rolls-Royce Cullinan has a body length of 5341mm, a width of 2164mm, a height of 1836mm, and a wheelbase of 3295mm, making it significantly larger than the Bentayga. The length and wheelbase give the vehicle a long and imposing side profile, resembling a mobile castle. More details about the Cullinan are as follows: 1. Detail one: The Cullinan is powered by a 6.7-liter twin-turbocharged V12 engine, which delivers a maximum power of 420kW and a maximum torque of 850Nm. The engine reaches its peak power at 5000 rpm and its peak torque at 1600 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block to reduce weight, thereby enhancing the car's handling and fuel efficiency. 2. Detail two: The engine is paired with an 8-speed automatic transmission (8AT), which improves gear-shifting smoothness and fuel economy. The 8AT also offers superior reliability and durability. 3. Detail three: The Cullinan employs double-wishbone independent suspension at both the front and rear. This sophisticated suspension system enhances handling and ride comfort. The double-wishbone setup consists of two wishbones connected by a linkage, which helps reduce body roll and minimizes brake dive.
9
0
Share

What's the difference between turning on ECO mode and not?

Enabling ECO mode allows for rational gear control of the engine's RPM to reduce unnecessary fuel consumption. ECO primarily makes comprehensive judgments and analyses during vehicle movement regarding factors affecting fuel consumption, such as automatic transmission gear, engine RPM, vehicle speed, braking, and transmission oil temperature. The ECU control unit then calculates the optimal fuel quantity to supply the engine for operation, effectively reducing fuel consumption compared to normal driving mode. In a few cases, it's unnecessary to enable ECO mode: When the vehicle is traveling at high speeds (up to 100km/h), even with ECO turned on, the vehicle's computer will prioritize speed, causing the ECO mode to automatically deactivate. When high torque output is needed, such as when climbing a hill, the engine's computer will prioritize ensuring and delivering sufficient power to drive the vehicle, causing the ECO mode to automatically deactivate. Modes: Generally, it can be divided into two types: passive ECO driving mode and active ECO driving mode. The passive ECO driving mode mainly serves a reminder and guidance function. The active ECO driving mode usually has a button; once activated, a series of driving-related settings will change, such as a smaller throttle opening corresponding to the same accelerator pedal depth (making the accelerator less responsive), the transmission shift logic leaning more towards economy (shifting up earlier), and some vehicles may also adjust the air conditioning output power simultaneously.
15
2
Share

Does Geely have four-cylinder models?

Geely does have four-cylinder models, such as Emgrand, Emgrand GL, Vision, Vision X3, Boyue, Emgrand GS, Xingyue, etc. Four-cylinder engine: The four-cylinder engine is structurally more balanced, as the vibrations generated by piston movement during operation can cancel each other out. Engine maintenance considerations: It is recommended to use high-quality fuel, which not only improves fuel economy but also extends the engine's lifespan to some extent. Regularly clean engine carbon deposits to prevent oil pipe blockages that may affect normal engine operation. Change engine oil on schedule to maintain its cooling, lubrication, and cleaning capabilities.
9
0
Share

Where to Set Up the Head-Up Display in Mercedes-Benz E300L?

The head-up display switch in Mercedes-Benz is located at the end of the row above the handbrake, with an 'i' button. Press it to turn it on. Here are some related introductions about the head-up display: 1. Introduction One: The head-up display, abbreviated as HUD, is also known as the parallel display system. It is a multifunctional instrument panel centered around the driver with blind operation. Its function is to project important driving information such as speed and navigation onto the windshield in front of the driver, allowing the driver to see crucial driving information like speed and navigation without having to lower or turn their head. 3. Introduction Two: When shifting focus from observing the nearby instrument panel to looking at the distant road, the driver's gaze needs to move from the road to the instrument panel. Due to the lower brightness inside the car compared to the higher brightness of the road outside, the eyes go through a process of adjusting from bright to dark and back to bright. The HUD head-up display can avoid this situation, ensuring that even in emergency situations, the driver has enough time to react without being distracted by looking at the instrument panel, thereby reducing eye fatigue. Apart from the convenience it brings to driving, many car enthusiasts are drawn to its extremely cool design and the sense of technology it provides.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.