How to reset the maintenance indicator on a Polo car?
4 Answers
Method to reset the maintenance indicator on a Polo car: 1. Turn off the engine and remove the key; 2. Press and hold the right button below the dashboard, then insert the key and turn it to the power-on position (do not start the engine). Release the right button once the key is turned to the power-on position, and a small wrench symbol will appear; 3. After the small wrench symbol appears, press the left button below the dashboard to reset the maintenance indicator. The Polo is a compact car produced by SAIC Volkswagen, with dimensions of 4053 mm in length, 1740 mm in width, and 1449 mm in height, and a wheelbase of 2564 mm. In terms of suspension, the Polo features a MacPherson strut front suspension and a torsion beam rear suspension.
I've been driving a POLO for several years, and the maintenance indicator with that little wrench icon keeps lighting up, which is quite annoying. I've dealt with it myself a few times. The method is quite simple: first, turn off the engine and don't start the car. Then, locate the reset button on the dashboard, usually near the odometer, and hold it down. Next, turn the ignition to the ACC position—the dashboard lights will all come on, but don't press the accelerator to start the car. At this point, you'll see the maintenance light flashing. Keep holding the button until the icon turns off or displays 'reset complete' before releasing it. Remember, this is usually done with the key in the first or second position—don't mix up the steps. Sometimes, if it's cold or the battery voltage is low, it might fail; just try again or wait a bit before retrying. Most importantly, after resetting, make sure to get the maintenance done promptly because the car is reminding you that the oil or filter needs changing. Ignoring it can lead to serious problems. Regular maintenance extends the engine's lifespan, saving you hassle and money—don't cut corners and delay it.
As a tech enthusiast who frequently tinkers with small cars, the process to reset the maintenance indicator on a POLO requires some attention to detail. The core steps involve a manual reset: turn the key to the OFF position to cut power to the entire vehicle; then press and hold the reset button on the dashboard without releasing it; turn the key to the ON position (dashboard lights up but do not start the engine); hold for a few seconds until the maintenance reminder on the screen disappears, then release. It's recommended to first confirm the button location in the owner's manual, as it may vary by model year. If there's no response after several attempts, it might be due to poor contact or insufficient battery power—in which case, you'll need to use a diagnostic tool to reset it or simply visit a service center. By the way, the maintenance indicator is meant to remind you of service intervals. After resetting, promptly replace the engine oil and filter to ensure smoother engine operation, stable fuel consumption, and avoid significant engine wear from long-term neglect.
I just bought a POLO not long ago and was startled when the maintenance light came on. Later, I asked a friend and learned that it can be reset by myself. The operation is quite quick: turn off the car key, don't start the engine; press and hold the reset button on the dashboard; turn the key to the second position, watch the indicator light; release the button once the light goes off. If it doesn't work, it might be due to a broken button or a system malfunction, then just drive to a 4S shop or repair shop to get it fixed. Don't skip maintenance out of laziness, as regular maintenance ensures safer and longer-lasting driving.
