How to Reset the Changan Tire Pressure Monitoring Light?

1 Answers
StAubree
07/29/25 4:41pm
Firmly press the vehicle's brake pedal to prepare for turning on the power. Press the vehicle's one-touch start button. The dashboard lights up, indicating the power is on. Inflate all four tires to the standard pressure. Press and hold the tire pressure warning light reset button for 3 seconds.
Was this review help?
10
3
Share
More Forum Discussions

What Causes the Puttering Sound in a Car Engine?

The causes of a puttering sound in a car engine are: 1. Engine misfire, where the exhaust gas flow shows obvious intermittency accompanied by severe shaking of the exhaust pipe; 2. Engine carbon buildup and clogged filters leading to an overly rich air-fuel mixture; 3. During cold starts, the engine's lubrication is less effective as the oil has poor fluidity and is more viscous, resulting in a puttering sound, which is a normal phenomenon. Engine maintenance methods include: 1. Using high-quality engine oil; 2. Using qualified coolant; 3. Regularly cleaning radiator scale; 4. Periodically removing carbon deposits from the car; 5. Timely replacement of the car's air filter, oil filter, and fuel filter.
18
3
Share

Should the car battery be removed if the car is not driven for a long time?

If a car is not driven for a long time, the battery should be removed because the battery will slowly discharge even when the car is not in use. After about 3 months, the battery will be completely discharged, making it impossible to start the car when you need to drive it again, and it may even severely damage the battery's lifespan. If you choose not to remove the battery, you can start the car once a week to ensure the battery maintains sufficient charge. Precautions for charging a car battery: 1. Always connect the charger directly to the battery to avoid removing it, as this may cause data loss; 2. If the battery voltage drops below 10% of the rated voltage, it may lead to a dead battery; 3. Avoid exposing the battery to water during charging.
16
0
Share

What are the reasons for the sudden failure of the car wiper spray?

The reasons for the sudden failure of the car wiper spray are: 1. Lack of wiper fluid, indicated by a warning light on the dashboard, reminding the need to add wiper fluid; 2. Poor selection of wiper fluid can cause freezing in winter; 3. Malfunction of the wiper spray motor, leading to the motor not working. The wiper is an important accessory installed on the windshield, whose function is to clear rain, snow, and dust that obstruct the view on the windshield. Wipers can be categorized by their driving mechanisms into mechanical, vacuum, pneumatic, hydraulic, and electric types. Modern cars generally use electric wipers, which have the advantages of simple structure and convenient control.
10
2
Share

What brand of engine oil should the Escort use?

The Escort can use Ford-branded engine oil. At a 4S dealership, you can add 5W20 engine oil, with a replacement cycle of 10,000 kilometers or one year. The original factory oil is well-suited for the engine, but depending on different needs—such as achieving quiet operation, fuel efficiency, or enhanced performance—other engine oils can also be selected. The Escort is a model under Changan Ford, with body dimensions of 4587mm in length, 1825mm in width, and 1490mm in height, and a wheelbase of 2687mm. In terms of power, this car is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 113kW and a maximum torque of 142Nm.
2
4
Share

How to Open the Front Hood of the Envision?

To open the front hood of the Envision: First, pull the handle located below the driver's compartment. Then, go to the front center of the hood, lift the hood with one hand while reaching into the center gap with the other hand. Inside, there is a lever—pull it firmly to the right to release the front hood. To close the engine hood, simply press it down manually. Taking the 2021 Envision as an example, its body dimensions are 4694mm in length, 1839mm in width, and 1686mm in height, with a wheelbase of 2750mm and a fuel tank capacity of 66 liters. This model is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
17
0
Share

How to Adjust the Valve Shim on a Sonata?

The adjustment method for the Sonata valve shim: 1. Remove the valve cover, tighten the rocker arm shaft bracket, and place the decompression handle in the preheat I position; 2. Rotate the crankshaft until the intake valve of the first cylinder changes from open to closed, and use the top dead center positioning pin to determine the compression top dead center of the first cylinder; 3. Return the decompression handle to the working position, and check and adjust the valve clearance of the remaining valves from front to back; 4. Place the decompression handle back in the preheat I position, pull out the top dead center positioning pin from the flywheel positioning hole, slowly rotate the crankshaft, and when it falls back into the flywheel positioning hole, return the decompression handle to the working position, and then check and adjust the valve clearance of the remaining 4 valves; 5. Review once according to the aforementioned sequence, and re-adjust if incorrect. After adjustment, securely tighten the top dead center positioning pin on the flywheel housing and reinstall the valve cover. Taking the 2020 automatic Zhixiang edition Sonata as an example, its body dimensions are 4955mm in length, 1860mm in width, and 1445mm in height, with a wheelbase of 2890mm, a fuel tank capacity of 60 liters, and a body weight of 1542kg.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.