How to Replace Windshield Wiper Blades?
3 Answers
To replace windshield wiper blades, follow these steps: 1. Lift the metal wiper arm away from the windshield and keep it perpendicular to the windshield for stability; 2. Press the tab to remove the old wiper blade; 3. Insert the new wiper blade and gently rotate the new wiper; 4. Hook the new blade into place to secure it, then return the wiper to the windshield. For wiper blade maintenance: 1. Always use windshield washer fluid when operating the wipers—never use them dry; 2. Avoid using wiper blades on stubborn or hard debris—clean manually instead; 3. When lifting wipers during car washing or routine cleaning, hold only the spine of the wiper arm.
I've changed the wiper blades a few times before, and it's actually quite simple and doesn't require any tools. First, turn off the car key to prevent the wipers from accidentally starting and hurting your hands. Then, gently lift the wiper arm to make it stand vertically above the windshield—be careful not to suddenly let go, as it might snap back and damage the glass. When removing the old blade, most car models have a clip or small hook; just press or push it to release. Next, take out the newly purchased wiper blade, align it into position, and push until you hear a click, indicating it's properly installed. Finally, lower the wiper arm, start the car, and spray some water to test if it wipes cleanly. I usually replace them every six months because old blades can develop cracks or make a scratching noise, which affects visibility during rainy driving. Plus, buying a pair online only costs around ten bucks, saving the labor fee of going to a repair shop.
As a new driver, I was a bit nervous about replacing my wiper blades for the first time, but it turned out to be super easy! First, check for wiper wear – if they streak or make noise, it's time for a change. With new blades ready, remember to always turn off the car before starting. Lift the wiper arm carefully, folding it up slowly like a fan, then press the small tab in the middle of the old blade to remove it – don’t yank it. Installing the new blade is even simpler: just align it with the hook slot as per instructions and slide it in. Before testing, I like to wipe the glass and wipers with a damp cloth to ensure no dirt affects performance. Regular replacement also prevents windshield scratches, saving money and hassle.
