How to Replace the Wiper Blades on a Volkswagen Sagitar?
2 Answers
Method for replacing the wiper blades on a Volkswagen Sagitar: Press down on the square plastic tab above the wiper connector, pull out the old wiper blade, and insert the new one. Instructions for using the Volkswagen Sagitar wipers: 1. Pull the lever backward to activate the front wipers and spray washer fluid. 2. The default position is INT, where the wipers automatically operate when the vehicle detects increased rainfall. The right adjustment button controls the sensitivity of the rain sensor. 3. The higher you lift the wiper switch, the faster the frequency. LO is the low-speed setting, and HI is the high-speed setting. 4. Push the lever downward; the OFF position turns off the wipers. 5. Move the lever to 1X for a single wipe cycle.
Replacing the wiper blades on a Volkswagen Sagitar is actually quite simple. I often maintain my car myself, and the steps are straightforward. First, turn off the engine to prevent accidents, then lift the wiper arm to a vertical position—be gentle to avoid it snapping back and damaging the windshield. Locate the small button on the wiper connector, press it, and the old wiper blade will loosen for easy removal. Align the new wiper blade with the slot, push it in until you hear a click to confirm it's locked. Lower the wiper arm, test it by spraying water and wiping to ensure no skipping or noise. Doing it yourself saves time and effort, avoiding trips to the repair shop, and costs just a few dozen yuan for new blades. Make sure to buy the correct size for the Sagitar, such as 28 inches for the driver side and 26 inches for the passenger side, and replace them annually to maintain clear visibility.
