How to Replace the Oil Filter?
2 Answers
Replacing the oil filter involves the following steps: 1. Loosen the oil filter using a specialized wrench (turn counterclockwise). 2. When installing, apply a small amount of oil to the rubber gasket of the new oil filter, then screw on the new oil filter. 3. Add engine oil, then close the oil filler cap, and start the engine to check for any leaks at the oil filter and drain plug. Below is relevant information about oil filters: The function of an oil filter: It is used to remove impurities such as dust, metal particles, carbon deposits, and soot from the engine oil. Classification of oil filters: Full-flow and bypass types.
Changing the oil filter is something I'm familiar with, and anyone who enjoys DIY car maintenance will do it themselves. Before starting, make sure the engine is completely cooled to avoid hot oil burns. Park the car on a level surface and prepare the tools: a wrench, new oil filter, fresh oil, and an oil drain pan to catch the old oil. First, drain the old oil, then locate the oil filter, usually positioned under the engine like a metal can. Loosen the old filter with an oil filter wrench, being careful not to spill oil everywhere. Before installing the new filter, apply a thin layer of fresh oil to the rubber gasket for better sealing and to prevent leaks. Hand-tighten the new filter first—don't use full force—then give it an extra quarter-turn with the tool. Over-tightening can cause damage. Next, slowly pour in the new oil, avoiding spills, and check the dipstick to ensure it reaches the proper level. Start the engine and let it run for a minute to check for leaks—safety first. This task is done once a year, saving money and giving a sense of accomplishment. Remember to dispose of the used oil properly to stay eco-friendly.