How to replace the key battery for Volvo XC90?

1 Answers
Ayla
07/29/25 4:55pm
Volvo XC90 key battery replacement method: Use a cross-head screwdriver to unscrew the screws, gently pry open the key casing, then press the square hole below to remove the shell. Detach the old battery from the motherboard module, replace it with a new one. During installation, first insert one corner of the shell, then gently press to complete the process. The Volvo XC90 has a body length, width, and height of 4953mm, 1958mm, and 1776mm respectively, with a wheelbase of 2984mm. The vehicle is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission. This engine delivers a maximum power of 184kW and a maximum torque of 350Nm.
Was this review help?
8
3
Share
More Forum Discussions

What to Do When the Mechanical Key Also Fails to Open the Car Door?

Incorrect key turning direction. In most cases, turning the key clockwise unlocks the door, while turning it counterclockwise locks it. You can try adding some engine oil into the lock cylinder to lubricate it and see if it can be opened. If it still doesn't work, the lock cylinder needs to be replaced. In most cases, mechanical keys don't have significant issues. If there is a problem, it might be due to a later duplicated key that is incomplete and requires replacement.
10
0
Share

How to File an Insurance Claim for Scratched Car Paint?

If your car has isolated scratches without any signs of scraping or collision, they can be covered by the scratch insurance. Protect the scene, retain relevant evidence, notify Ping An Insurance Company by phone, and bring the necessary documents to the insurance company for an official claim. Vehicle scratch insurance is an additional coverage to the car damage insurance, meaning you can only purchase scratch insurance if you have already bought car damage insurance.
6
1
Share

How to Shift Back to D Mode with Paddle Shifters?

Manually select gears by pulling the right or left paddle shifter on the steering wheel. To upshift, pull the right paddle shifter (+). To manually return to D (Drive) automatic mode, toggle and hold the paddle shifter for approximately 1.5 seconds. Universal paddle shifters are located behind the steering wheel. Activate the automatic manual mode by pulling the paddle shifters. Operate the paddle shifters to upshift or downshift without taking your hands off the steering wheel.
9
3
Share

How to Deal with Water Under the Passenger Seat?

Check if the drainage holes of the sunroof, doors, and air conditioning are blocked. If they are, clean them out and drain the accumulated water. Inspect the sealing rubber rings and strips of the sunroof and doors to see if they are deformed or aged. If so, replace the rubber components. If there is water accumulation under the passenger seat, you can remove the floor mats and carpeting, then clean them with a car-specific carpet cleaner.
20
4
Share

What is the process for filing a replacement of an old engine?

In this case, it is initiated by the qualified after-sales department of the brand agent, and then the factory conducts an after-sales review. If the relevant numbers are damaged through abnormal means, an application can be made to replace or restore the engine-related numbers. The change application should be submitted to the vehicle management office within 10 days of replacement. At this time, it should be noted that the brand and model of the engine must not be changed.
16
2
Share

How to Defog a Car in Winter?

Methods for defogging a car in winter are as follows: 1. Dish soap mixed with water: Use kitchen dish soap mixed with water (1:6 ratio), apply evenly on the car's interior glass with a sponge, and wipe clean with a dry cloth after it dries, leaving no residue. Since dish soap contains surfactants, it can alter the surface tension of water, causing fog droplets to quickly coalesce into larger droplets, thereby preventing fogging. 2. Open windows for air circulation: If the fog inside the car is not too heavy, you can slightly open the windows on both sides to allow air circulation between the inside and outside of the car. This reduces the temperature difference and gradually dissipates the fog. The principle is similar to using the air conditioner's cold air but without increasing fuel consumption. However, this method has obvious drawbacks—it is not suitable during rain, snow, on highways, or when the fog is heavy. Additionally, opening the windows lowers the interior temperature. 3. Use the air conditioning system: Turn on the car's fan and cooling switch to blow cold air onto the windshield, which will quickly remove the fog. The effect is immediate. Initially, the fog inside the car may worsen due to the increased temperature difference, but once the warm air dries the moisture inside, the fog will disappear. If using this method, ensure to use the warm air to defog before driving and wait until the fog completely clears before hitting the road.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.