How to Replace the Cabin Air Filter in a Besturn B50?
4 Answers
Method for replacing the cabin air filter in a Besturn B50: 1. First, locate the cabin air filter, which is inside the front storage compartment on the passenger side; 2. Open the glove box, grasp both ends with both hands, and pull upwards firmly to remove the glove box. The blower is inside, and the cabin air filter is located there; 3. Then, remove the cover plate to access the cabin air filter and pull it out; 4. Finally, insert the new filter, paying attention to the correct orientation (front/back). Note: There are two types of cabin air filters—one without activated carbon and another with activated carbon (clarify before purchasing). The activated carbon cabin air filter can absorb a significant amount of odors. The general replacement interval for the cabin air filter is every 10,000 kilometers.
As a Besturn B50 owner, I've changed the air conditioning filter several times myself and find it quite simple. The Besturn B50's cabin air filter is located behind the glove compartment on the passenger side, and can usually be handled with bare hands. Here's the procedure: First open the glove box, locate the clips inside, gently press the buttons on both sides of the clips with your fingers to allow the glove box to fully flip downward, then you'll see the black filter cover. After removing the cover, take out the old filter - pay attention to the airflow direction indicated by an arrow to avoid installing it backward. Before inserting the new filter, blow off any dust and ensure there's no debris, then push it in following the arrow direction and replace the cover. The whole process requires no tools and takes about five minutes. I recommend replacing it every six months or 10,000 kilometers to improve cabin air quality, especially for families with children or elderly members to prevent dust allergies. Buying the filter yourself only costs a few dozen yuan, much cheaper than going to a 4S shop. Remember to handle gently and don't pull the glove box forcefully to avoid damaging the clips.
I helped a friend replace the air conditioning filter on a Besturn B50, which is a fairly routine task in the garage. The air filter location in the Besturn B50 is inside the glove box, and the design is quite reasonable. You'll need to open the glove box first, then locate the clips or plastic knobs on both sides—usually turning them to the right or pressing them downward will release the entire glove box. Once it's folded down, you'll see the filter cover; lift it to remove the old filter. When installing the new filter, make sure the side with the arrow faces downward or toward the airflow direction to ensure proper ventilation. Don't use too much force, as the plastic parts are fragile. I often see new car owners installing it backward, resulting in reduced airflow, which means having to redo it. The replacement frequency depends on the driving environment—in the city, it gets dirty in about three months, so replacing it prevents odors and pollen from entering. Tools are mostly unnecessary; beginners can use a phone light for better positioning. Finally, just reset the glove box and align the clips—it's not complicated. Replacing it twice a year is low-cost and ensures good health.
When I first got my Besturn B50, I was a bit nervous about changing the AC filter, but now I find it quite easy. The steps are simple: sit in the passenger seat, open the glove compartment and flip it down to reveal the black filter cover. No screwdriver needed—just manually remove the cover and pull out the old filter. When inserting the new filter, remember to align the arrow direction inward to avoid dust clogging. Close the cover and push the glove compartment back into place. The whole process takes less than five minutes, even beginners can learn quickly. I recommend checking it every quarter and replacing it if dirty, especially in spring when pollen is abundant—clean air helps ensure safe driving. Filters are cheap online, and DIY saves hassle.
