···
Log in / Register

What Causes Fogging on the Windshield?

1Answers
StFrancisco
07/24/2025, 06:40:28 PM

Fogging occurs due to the temperature difference between the inside and outside of the vehicle. Air Conditioning Defogging: This is the simplest method. Just turn on the front window defogging mode, set the fan speed to maximum, turn on the A/C switch, and adjust the temperature to the lowest setting. The fog on the glass will disappear. Additionally, some models are equipped with rear window and side mirror heating. Simply press the switch, and the fog will clear in about a minute. Defogging Spray: When using, just spray it evenly on the glass surface and wipe it clean with a dry towel. Its principle is to use surfactants to leave a protective film on the glass surface, altering the surface tension of water molecules. This causes fog droplets to coalesce into larger water droplets, thus not obstructing the view.

Was this review help?
110
Share
More Q&A

What are the maintenance intervals and items for sedans?

Sedans require maintenance every 5,000 to 10,000 kilometers. The maintenance items include changing the engine oil, oil filter, air filter, and fuel filter; as well as inspecting the body and tires, among others. Below are the relevant details: Vehicle maintenance content: Automobile maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle. The purpose is to keep the vehicle clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life. Precautions for vehicle maintenance: The key precaution for automobile maintenance is to regularly change the vehicle's engine oil. Engine oil has a limited lifespan, and it is essential to replace it periodically. Over time, the oil becomes increasingly contaminated, which can damage the vehicle's engine. Therefore, it is crucial to pay attention to engine oil maintenance during servicing.
109
Share

How to Test the Throttle Position Sensor of an Engine?

Engine throttle position sensor testing methods are as follows: 1. Check the power supply voltage and ground: Turn the ignition switch to the "OFF" position, unplug the sensor connector, then turn the ignition switch to the "ON" position. Use a high-impedance digital multimeter in voltage mode to measure the voltage between terminal 2 on the sensor harness side and ground. This voltage should be +5V. 2. Check the sensor's resistance and continuity: Turn the ignition switch to the "OFF" position, unplug the TPS connector, and measure with a multimeter. 3. Check the sensor's output voltage: Plug in the sensor connector, turn the ignition switch to the "ON" position, and use a high-impedance digital multimeter in voltage mode.
115
Share

Is Automotive Urea Harmful to the Human Body?

Under normal circumstances, automotive urea is not harmful to the human body (if it comes into contact with the skin, simply rinse it off with plenty of soapy water or clean water, but be sure to avoid contact with eyes and ingestion). Below is a detailed introduction to urea: 1. Automotive urea consists of 32.5% high-purity urea and 67.5% deionized water. Under high-temperature conditions, automotive urea may release ammonia gas, which can have corrosive and irritating effects on human skin tissues. Prolonged exposure to ammonia gas may lead to symptoms such as skin pigmentation or ulcers. (If such symptoms occur, seek medical attention immediately to avoid more serious consequences.) 2. The function of automotive urea is: In the Selective Catalytic Reduction (SCR) system of diesel vehicles, automotive urea helps catalyze the reduction of nitrogen oxides in the exhaust into harmless nitrogen (N2) and water, thereby reducing harm to the environment and human health.
120
Share

How Many Years Must a Driver's License Be Completed Within?

For obtaining a C1 driver's license, there is no fixed validity period starting from the registration date. The validity period begins from the day you pass Subject 1 and lasts for three years. Below are the relevant details: 1. For first-time applicants for a motor vehicle driver's license or those applying to add a permitted driving type, the vehicle management office should issue a driving skill test permit within one day after passing Subject 1. 2. The driving skill test permit is valid for three years. Applicants must complete Subject 2 and Subject 3 tests within this validity period. If the tests are not completed within the validity period, the passed test subjects will be invalidated. 3. During the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skills tests should not exceed five times. If the fifth scheduled test is still not passed, the results of other passed subjects will be invalidated.
113
Share

How to Get a Temporary License Plate for a New Car?

If you are applying for a temporary license plate during the vehicle registration process, the staff will provide you with a temporary plate before the official one is issued. If you are applying for a temporary license plate separately, you need to prepare the following documents in advance: ID card, car purchase invoice, compulsory traffic insurance policy (copy), and vehicle manufacturing certificate, and then visit the local vehicle management office to complete the procedure. Below are the relevant details: 1. A temporary license plate is a provisional vehicle driving permit issued by the vehicle management department of the public security bureau when a car has not yet been officially registered due to pending procedures. 2. According to the "Road Traffic Safety Law of the People's Republic of China," vehicles must display license plates as required when driving on the road. Failure to do so will result in penalties. However, before obtaining the official license plate, you must apply for a temporary license plate in accordance with regulations to legally drive on the road.
114
Share

Are the Three Major Components of Santana and Bora the Same?

Santana and Bora do not share the same three major components. The three major components of the Volkswagen Bora are the engine, transmission, and chassis. While the engine models differ, the transmission and chassis suspension are identical. Below are the introductions to the three major components: Engine Introduction: An engine is a machine capable of converting other forms of energy into mechanical energy, used as a power generation device. It also refers to the entire machine that includes the power unit, such as internal combustion engines (gasoline engines), external combustion engines (Stirling engines, steam engines), and electric motors. Chassis Introduction: The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a car. It supports and installs the car's engine and its various components and assemblies, forming the overall shape of the car, bearing the engine's power, and ensuring normal operation. Transmission Introduction: The transmission mainly refers to the car's gearbox, which is divided into manual and automatic types. The manual transmission primarily consists of gears and shafts, achieving speed and torque changes through different gear combinations. The automatic transmission (AT) is composed of a torque converter, planetary gears, and a hydraulic control system.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.