How to Replace the Brake Light on a Bora?

1 Answers
Cali
07/29/25 12:17pm
Bora brake light replacement method: After removing the dust cover on the back of the light, press and hold the rotating handle at the rear of the light, then unscrew it to remove. The Bora is a model independently designed by FAW-Volkswagen, with exterior dimensions of 4523mm in length, 1775mm in width, and 1467mm in height, and a wheelbase of 2610mm. The Bora is equipped with a 1.4TSI EA111 turbocharged engine, and features include a frameless wiper, rear window antenna, split front grille, wood grain interior trim, chrome package, aluminum brushed interior trim, leather steering wheel, USB port, secondary door unlocking function, and a sun visor with vanity mirror on the driver's side.
Was this review help?
5
5
Share
More Forum Discussions

What is the principle of a car tire pressure monitor?

There are two principles of car tire pressure monitors: 1. Use a wireless transmitter to send pressure information from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. 2. When the pressure of a certain tire decreases, the vehicle's weight will cause the rolling radius of that wheel to become smaller, resulting in its rotational speed being faster than other wheels. By comparing the difference in rotational speed between tires, the purpose of monitoring tire pressure is achieved. More information about tire pressure is as follows: 1. When the tire pressure is too high, the contact area between the tire and the ground decreases, and the contact area is inversely proportional to the pressure. The smaller the contact area, the greater the pressure the tire bears. When the tire bears excessive pressure, it will accelerate tire wear and may even cause brake failure and tire blowout. 2. When the tire pressure is too low, the contact area between the tire and the ground increases, leading to an abnormal rise in tire temperature during driving, which can easily cause sidewall deformation and reduce the tire's service life.
16
0
Share

Does the BMW i8 Use a Three-Cylinder Engine?

The BMW i8 is equipped with a combination of a 1.5-liter three-cylinder turbocharged engine and an electric motor. Here are the relevant details: 1. The BMW i8's engine delivers a maximum horsepower of 231 hp and a maximum power output of 170 kW, while the electric motor provides a maximum horsepower of 143 hp. It features all-wheel drive, paired with a 6-speed automatic transmission, achieving a top speed of 250 km/h and a 0-100 km/h acceleration time of 4.4 seconds. 2. The three-cylinder turbocharged engine helps reduce fuel consumption while maintaining performance, thereby improving the car's fuel efficiency. As a result, the i8 boasts excellent fuel economy, with a combined fuel consumption of approximately 5.7L/100km. 3. The BMW i8 incorporates more dynamic design elements in its exterior, including a redesigned front and rear bumper, along with the addition of a front spoiler, side skirts, and a rear diffuser. Furthermore, these modifications are accentuated with vibrant green accents, making the car stand out even more compared to the standard version.
10
3
Share

How to Replace Spark Plugs in a Volkswagen Bora?

Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage ignition wires, and mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the removed high-voltage ignition wires according to the firing order, and then secure the cover. Effects of faulty spark plugs: Damaged spark plugs can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in starting the engine, which affects the vehicle's normal operation. Severe erosion of the spark plug—such as scarring at the top, damage, or melted electrodes—indicates that the spark plug is ruined and should be replaced. Symptoms of faulty spark plugs in a car: Damaged spark plugs can lead to the following issues: difficulty starting the engine, reduced power, excessive exhaust emissions, and increased fuel consumption.
5
2
Share

Where is the outdoor temperature sensor of the Buick GL8 located?

The outdoor temperature sensor of the Buick GL8 is located on the front bumper. Below is relevant information about temperature sensors: 1. Function: It converts temperature into electrical signals by utilizing the various physical properties of materials that change with temperature. 2. Classification: According to the measurement method, they can be divided into two main categories: contact and non-contact. Based on the characteristics of sensor materials and electronic components, they are further classified into thermistors and thermocouples. Contact temperature sensors have a detection part that makes good contact with the measured object and are also known as thermometers. Thermometers achieve thermal equilibrium through conduction or convection, allowing the thermometer's reading to directly indicate the temperature of the measured object. Generally, they offer higher measurement accuracy. Within a certain temperature measurement range, thermometers can also measure the internal temperature distribution of an object. Non-contact temperature sensors have sensing elements that do not come into contact with the measured object and are also known as non-contact temperature measurement devices. These devices can be used to measure the surface temperature of moving objects, small targets, or objects with small heat capacity or rapid temperature changes (transient), as well as to measure the temperature distribution of a temperature field.
20
0
Share

How long does it take to get the license plate after successfully selecting a new car number?

After the selected license plate number is confirmed by the vehicle management office, it generally takes about 5 working days to get the license plate. Below are the methods for displaying temporary license plates on a car: 1. One plate: A single temporary license plate should be affixed to the lower left or right corner of the front windshield, where it does not obstruct the driver's view. 2. Two plates: If there are two temporary license plates, one should be affixed to the front windshield, and the other should be placed on the lower left corner of the rear windshield inside the car. If there is no space on the rear windshield, the second temporary license plate should still be carried in the vehicle. Below is some extended information on the topic: 1. Traffic regulations: Car owners should note that temporary license plates are subject to the same traffic laws as regular license plates. Therefore, do not assume that temporary plates allow reckless behavior or that they are too small to be captured by cameras—high-definition cameras can clearly record temporary license plates. 2. Types of temporary plates: There are two types of temporary plates—one with a sky-blue background, black characters, and black borders, which is only valid for driving within the city (local temporary plates), and another with a brown-yellow background, black characters, and black borders, which allows for intercity travel (non-local temporary plates).
18
4
Share

How many points can be deducted from a driver's license for online processing?

Points deducted from a driver's license can be processed online, but the traffic violations eligible for online processing must involve 11 points or fewer, not exceeding 12 points. The processing software is the mobile app "Traffic Management 12123," which allows for the deduction of driver's license points online. The calculation method for the driver's license points cycle is as follows: 1. Starting from the day the driver's license is first issued, each 12-month period constitutes a cycle. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," Article 65, the cumulative points cycle for road traffic safety violations (i.e., the points cycle) is 12 months, with a maximum of 12 points, calculated from the date of the first issuance of the motor vehicle driver's license; 2. Based on the severity of the road traffic safety violation, the points deducted for a single violation can be one of five levels: 12 points, 6 points, 3 points, 2 points, or 1 point; 3. Article 66 states that for motor vehicle drivers' road traffic safety violations, penalties and point deductions are executed simultaneously. If a motor vehicle driver commits two or more violations at once, the points should be calculated separately and accumulated.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.