How to Replace the Air Filter in a 2020 Magotan?

What to Do When Car Wipers Don't Clean Properly?

If the car wipers don't clean properly, you can use professional cleaners and protectants to thoroughly remove stains. If the wipers are aged or hardened, they need to be replaced. The wiping part of car wiper blades is made of natural rubber material. Wiping on a very dry windshield can cause excessive friction, damaging the rubber surface and affecting the cleaning effect. Before operating the wipers, car owners should remove any debris attached to the glass surface and the wiper rubber strips, as these impurities can increase friction between the rubber and the glass during wiper operation, potentially damaging the rubber or scratching the glass surface, leading to unclear wiping.

15

1

Share

What are the maintenance methods for automatic transmission cars?

Maintenance methods for automatic transmission cars: 1. Regularly check the transmission fluid: The transmission fluid must be replaced after a period of use to ensure its cleanliness for optimal performance; 2. Periodically replace the transmission fluid: If you notice vibrations or delays when shifting gears in an automatic transmission car, it indicates the need to replace the transmission fluid; 3. Ensure the proper amount of transmission fluid: Engine oil should be checked when the engine is cool, while the transmission fluid should be checked when the transmission is preheated to 50 degrees Celsius. After shifting through each gear for 2 seconds and then shifting to park, observe whether the fluid is at the normal level. If it is below the minimum line, promptly add the same quality of lubricating oil.

13

2

Share

Should You Leave the Windows Slightly Open When a New Car Is Exposed to the Sun?

First, close the windows and expose the car to the sun to heat up the formaldehyde gas inside to a certain extent (accelerating the movement of formaldehyde molecules). Then, open the windows to allow fresh air to circulate in, thereby expelling the harmful gases. Here are some details about exposing a car to the sun: 1. Purpose: Exposing a new car to the sun is intended to accelerate the movement of formaldehyde molecules, thereby volatilizing and dispersing the formaldehyde gas retained in the car. This not only helps eliminate the odor of the new car but also allows fresh air to circulate in, greatly aiding the overall air circulation in the vehicle. 2. Precautions: Do not keep the car exposed to the sun continuously, as prolonged exposure can directly accelerate the aging of interior seats and may even release more harmful gases.

17

2

Share

Can the Sagitar 1.2T use 92 octane gasoline?

The Sagitar 1.2T can use 92 octane gasoline. If you want the engine to perform better and extend its service life, you can also use 95 octane gasoline. The Sagitar 1.2T is equipped with a four-cylinder turbocharged engine, model EA211DJM, which is also used in most of Volkswagen's compact cars, such as the Golf, Lavida, and POLO. In terms of power parameters, this engine has a maximum horsepower of 116 hp, a maximum power of 85 kW, and a maximum torque of 175 Nm. The Sagitar's body dimensions are 4655mm in length, 1780mm in width, and 1453mm in height, with a wheelbase of 2651mm.

12

4

Share

What type of gasoline should the Roewe RX5 use?

The Roewe RX5 requires gasoline with an octane rating of 92 or higher. Below are some important considerations regarding refueling: 1. Do not use low-octane gasoline: Using low-octane fuel can cause severe damage to the engine and catalytic converter, reduce engine power and torque, and increase fuel consumption. If low-octane gasoline is used, you may hear engine knocking noises. In such cases, switch to the recommended octane rating or higher as soon as possible. 2. Unusual noises when using the recommended octane gasoline: If you still hear severe knocking noises after using the recommended octane rating or higher, immediately visit an authorized after-sales service center for inspection. 3. High-octane gasoline: Using gasoline with a higher octane rating than required by the engine is permissible, but it does not provide any advantages in terms of engine output power or fuel consumption.

17

4

Share

How often should the timing belt of a Crown be replaced?

The timing belt of a Crown should generally be replaced every 50,000 kilometers. Once the timing belt shows signs of aging or cracking, it must be replaced immediately. It is generally recommended to replace the timing belt every 3 to 5 years or approximately 80,000 to 100,000 kilometers. The timing belt is a crucial component of the engine's valve system, ensuring accurate intake and exhaust timing by connecting to the crankshaft and maintaining a specific gear ratio. The Crown is a mid-to-large-sized sedan under the Toyota Group. The 2018 Crown model has a body length of 5020mm, a width of 1805mm, a height of 1480mm, and a wheelbase of 2925mm.

7

0

Share

How to Replace the Air Filter in a 2020 Magotan?

What to Do When Car Wipers Don't Clean Properly?

What are the maintenance methods for automatic transmission cars?

Should You Leave the Windows Slightly Open When a New Car Is Exposed to the Sun?

Can the Sagitar 1.2T use 92 octane gasoline?

What type of gasoline should the Roewe RX5 use?

How often should the timing belt of a Crown be replaced?

What does 20560r16 mean?

What kind of engine oil should be used for Camry?

What are the body dimensions of the Lincoln Navigator?

Is it necessary to apply film on the front windshield of a car?