How to Replace the Air Conditioning Filter in a Tiida?
3 Answers
The method to replace the air conditioning filter in a Tiida is as follows: 1. Remove the screws on the outside of the glove box, then forcefully pull off the lower panel of the glove box by pulling one side first and then the other; 2. Press the upper and lower clips on the inner left side of the glove box, remove the cover of the air conditioning filter, and then you can see the old filter. Replace it with a new one and reassemble everything following the original steps. The Tiida is a car produced by Dongfeng Nissan Passenger Vehicle Company, with body dimensions of 4250mm in length, 1695mm in width, and 1535mm in height, and a wheelbase of 2700mm. The triangular headlights and front grille give the Tiida a somewhat fierce front appearance, while the wavy waistline on the side adds tension and dynamism.
I found that replacing the air filter in the Tiida is quite simple—it's located behind the glove compartment on the passenger side. First, empty the glove compartment, then press the plastic clips on the inner side to let the glove compartment hang down. At this point, you can see the filter cover, which is a rectangular plastic piece. Unclip it and remove the old filter. Before inserting the new filter, remember to align the arrow direction toward the interior fan to avoid installing it backward. Close the cover, push the glove compartment back, and secure the clips. The whole process doesn’t require a screwdriver or any tools and takes just 10 minutes. Having driven the Tiida for years, this trick has saved me a lot of money—shop service fees cost at least 100 yuan. I recommend replacing it every 10,000 km or every six months, especially during allergy-prone spring and autumn seasons, to maintain fresh air inside the car and prevent odor-causing bacteria. Don’t forget to check the quality of the new filter—choosing one with PM2.5 filtration is even better.
I just replaced the air conditioning filter for my Nissan Tiida. As a homemaker, I found the operation super practical. The steps were clear: start from the passenger side, remove the items in the glove box, then pinch the clips on both sides of the box and gently pull it down. After exposing the cover, pry it open, pull out the old filter, and when installing the new one, make sure the arrow aligns with the indicator. Just push the glove box back tightly to finish. Doing it yourself saves both hassle and money—the filter costs just a few dozen yuan online, while a 4S shop would charge much more. I make it a habit to check every quarter, especially replacing it during the rainy season to reduce musty odors from humidity and improve the family's breathing comfort. I also clean the air vents to prevent dust buildup and extend the system's lifespan.
