How to Replace the Air Conditioning Filter in a Bora?

[BriannaDella]

The steps to replace the air conditioning filter in a Bora are: 1. Ensure the car is turned off; 2. Open the air conditioning housing cover located in the front passenger seat area to access the filter; 3. Align the clips to remove the old filter and install the new one using the same method. The Bora has a body size of 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm and a fuel tank capacity of 50 liters. It is equipped with a 1.2T turbocharged engine, delivering a maximum power of 85kW at 5000rpm and a maximum torque of 200Nm between 2000 to 3500rpm, paired with a 7-speed dual-clutch transmission.

[Nate]

I often help friends replace the air filter for their Volkswagen Bora, and I find it quite simple. First, open the glove compartment on the passenger side, and press down slightly to reveal the rear cover. Second, carefully remove the plastic cover without using too much force to avoid breaking the clips. Third, take out the old filter, paying attention to the arrow direction—it should point toward the passenger side to ensure proper airflow. Fourth, check if the new filter matches the model. I usually buy activated carbon versions on Taobao for their cost-effectiveness. Fifth, align and insert the new filter, then reattach the cover and glove compartment. The whole process doesn’t require tools and takes just ten minutes. I recommend replacing it twice a year, in spring and autumn, especially when there’s a noticeable odor after using the AC, to maintain air quality and prevent mold. Avoid cheap, low-quality filters to ensure proper filtration.

[DeElena]

Super Quick Guide to Replacing the Bora's Cabin Air Filter: Open the glove compartment on the passenger side, press and pull it out; lift the plastic cover and gently remove it; pull out the old filter, noting the arrow direction mark—the arrow should point towards the front of the car; align and insert the new filter, ensuring it's fully snapped in; finally, reattach the cover. Don't waste money at the shop—doing it yourself costs just a few dozen yuan, and buying filters online is very convenient. We recommend the original factory model. This not only saves money but also improves your DIY skills. Pay attention to the filter material—it's best to choose one that protects against PM2.5, improving cabin air quality and preventing allergies. The replacement frequency depends on your driving environment—if you drive mostly in the city, change it every six months for a time-saving, hassle-free, and effective solution. Just a few simple steps, even beginners can easily handle it.

[AmirFitz]

Be careful when changing the Bora's cabin air filter: Park the car and turn off the engine, open the glove compartment on the passenger side, and slowly remove the internal panel without forcing it to avoid damaging plastic parts. Note the airflow arrow direction when removing the old filter—the new filter's arrow must point toward the front of the car during installation, otherwise filtration will be poor. The glove compartment has limited space, so wear gloves to prevent scratches. I usually check the filter for debris before replacement and use a vacuum to clean dust. Recommended replacement frequency is every 10,000 km or once a year, especially after spring flowering season to prevent pollen buildup affecting health. No special tools are needed—just be cautious, and the whole process takes about five minutes for safe and efficient operation.