How to Replace Spark Plugs in a Chevrolet Sail?

2 Answers
DelAngelina
07/24/25 6:03am
Steps to replace spark plugs in a Chevrolet Sail: 1. Remove the spark plug cap when the engine is cold; 2. Unscrew the old spark plug counterclockwise; 3. Screw in the new spark plug clockwise; 4. Reattach the spark plug cap; 5. After all spark plugs are replaced, check for any errors, start the engine for a test run. If the engine operates normally, the vehicle is ready for regular use. When removing or installing spark plugs, ensure that no dust enters the cylinder. Clean the surrounding area before removing the spark plugs. The Sail is a compact car under the Chevrolet brand, featuring a 4-door, 5-seat sedan body structure. Its dimensions are 4300mm in length, 1735mm in width, and 1502mm in height, with a wheelbase of 2500mm.
Was this review help?
12
1
Share
OAaron
08/11/25 1:49am
I've been driving my Chevrolet Sail for almost 5 years, and changing spark plugs is actually quite simple and saves money. Prepare tools like a spark plug socket wrench and new spark plugs matching the original factory specifications, such as NGK or ACDelco model BPR6ES, which typically cost a few dozen yuan. Open the front engine cover, locate the four ignition coils, and gently pull off the connecting wires, being careful not to damage them. Disconnect the negative battery terminal to prevent electric shock—safety first—and wait ten minutes. Use the wrench to loosen the spark plugs counterclockwise, remove them one by one, and check if the old spark plugs have excessive carbon buildup or oil stains, which can affect ignition. Before installing the new spark plugs, measure the gap to about 0.028 inches. Don't worry if you don't have the tool; new ones are usually preset from the factory. Insert them, hand-tighten first, then use the wrench to add a quarter turn to prevent gas leakage, but avoid over-tightening to protect the threads. Reconnect all the wiring, start the engine, and listen for smooth operation. If the idle is unstable, recheck everything. Doing it yourself saves over a hundred yuan each time. Replace them every 40,000 kilometers to ensure fuel efficiency and quick ignition.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Why does fuel consumption increase after using fuel additive?

After using fuel additive, the increase in fuel consumption is because the main function of fuel additive is to remove carbon deposits, and it does not directly save fuel. The rise in fuel consumption can be caused by various factors, including driving habits, road conditions, weather, whether the air conditioning is on, the number of traffic lights, vehicle load, fuel quality, and the vehicle's own issues. Below are the details: For vehicles with dirty fuel systems, there may be short-term unstable idling, poor fuel supply, or clogging, which are normal. This is because excessive deposits in the car's fuel system are cleaned by the fuel additive, clogging the fuel filter (fuel filter element) or carburetor. Continued use will gradually remove the deposits, restoring fuel flow and normal operation. In rare cases, it is recommended to clean or replace the fuel filter element before further use.
9
0
Share

Is the Envision Going to Be Discontinued?

The Envision is currently not discontinued, but it is undergoing a replacement of its older engine models. Additional information about the Envision is as follows: 1. Model: The Buick Envision is positioned as a midsize SUV, ranking first in aspects such as power, interior, and comfort. 2. Dimensions: The new vehicle has a length of 4686mm, a wheelbase of 2750mm, a fuel tank capacity of 66 liters, and uses a front MacPherson + rear multi-link independent suspension. The official 0-100km/h acceleration time is 10.3 seconds, with an actual test result of 9.51 seconds. 3. Features: The new vehicle is equipped with tire pressure monitoring, rearview camera, cruise control, auto start-stop, panoramic sunroof, keyless entry for all doors, a 4.2-inch LCD dashboard, heated front seats, an 8-inch central control screen supporting CarPlay and Android Auto, LED daytime running lights, one-touch up/down with anti-pinch for front windows, and automatic dual-zone air conditioning, among other features.
11
4
Share

Where is the keyhole on the Envision?

At the rear end of the driver's side door handle, there is a hidden keyhole. Extended information is as follows: 1. Models: The current models offer 1.5T and 2.0T engine options, each available in both front-wheel drive and all-wheel drive configurations. The 1.5T is paired with a 7-speed dual-clutch transmission, while the 2.0T comes with a 6-speed automatic transmission. 2. Configuration: On August 28, 2014, the Buick Envision, an SUV model under Shanghai GM, made its official debut ahead of the Chengdu Auto Show. The Envision is equipped with a 2.0T engine, matched with a 6-speed automatic transmission. 3. Highlights: The new Buick Envision retains the exterior and interior design of the current model, featuring 1.5T and 2.0T engines, with the standout feature being its compliance with the China VI emission standards. The China VI version of the Envision comes with an extended factory warranty covering major components like the engine and transmission for 8 years or 160,000 kilometers. Additionally, Buick Envision users will enjoy lifetime free OnStar 4G connectivity with 100GB of annual data.
1
4
Share

Where is Land Rover produced?

Land Rover is a British automobile manufacturer. Some of Land Rover's models are produced in the UK, while others are manufactured domestically. The domestically produced Land Rover models include the Evoque and Discovery. Here are some specific details about Land Rover: 1. Historical Background: Land Rover is a British luxury all-terrain SUV brand, founded by Maurice Wilks in 1948. It is currently owned by India's Tata Motors Group. 2. Three Major Product Families: Land Rover currently has three major product families: the Range Rover series, the Discovery series, and the Defender series.
9
5
Share

What causes the Leopaard CS10 to shake when braking?

The shaking of the Leopaard CS10 during braking may be caused by uneven wear of the brake discs, primarily due to the driver frequently using intermittent braking (point braking). Below are the specific reasons for shaking during hard braking: 1. Severe unilateral wear of the brake disc: This is caused by the vehicle's own issues, mainly due to poor retraction of the brake caliper. Car braking is achieved by two friction pads pressing against the brake disc via the brake caliper to create friction and braking effect. Since the brake is only connected to the inner friction pad, incomplete retraction of the brake caliper after braking can lead to aggravated unilateral wear. 2. Driving habits: Continuous braking can generate high heat in the brake discs. If hard braking is applied at this point, it may disrupt the dynamic balance of the brake discs. Brake discs are made of cast iron, which, although highly stable, can still deform under improper operation. 3. Use of low-quality brake pads: Inferior brake pads contain a large amount of metal substances. When these metal substances come into contact with the brake disc, their hardness causes the brake pads to wear out more slowly (they are designed to wear) and can also reduce the lifespan of the brake discs.
10
2
Share

What type of suspension does the Trumpchi GS4 have?

The front suspension of the Trumpchi GS4 is a MacPherson strut independent suspension, and the rear suspension is a multi-link independent suspension. Taking the 2021 Trumpchi GS4 as an example, it is a compact SUV with body dimensions of: length 4545mm, width 1856mm, height 1668mm, wheelbase 2680mm, and a curb weight of 1480kg. The 2021 Trumpchi GS4 is equipped with a 1.5T turbocharged engine, producing a maximum horsepower of 169PS, maximum torque of 265Nm, and maximum power of 124kW, paired with a 6-speed manual transmission.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.