How to Replace a BMW Battery?

Will points be deducted if the side line exceeds 30 cm during parallel parking?

Parallel parking with the side line exceeding 30 cm results in a 10-point deduction. Additionally, other penalty points for parallel parking include stopping midway (100-point deduction), tires touching the lane boundary while moving (10-point deduction), and the vehicle body crossing the line after stopping in the parking space (100-point deduction). Although the rules state that stalling the engine due to improper operation deducts 10 points, stalling during parallel parking is equivalent to stopping midway, resulting in an immediate 100-point deduction. After the implementation of the new traffic regulations, parallel parking no longer uses guide poles but instead relies entirely on ground markings to define the parking space boundaries. For learners obtaining a C1 driver's license, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. The vehicle should be driven parallel to the parking space, then reversed into the space without any pauses. As long as the vehicle is parked within the designated boundaries without crossing the side lines, it is considered a pass. Adjust the left and right side mirrors for parallel parking: the left mirror should be lowered enough to see the left rear wheel, while the right mirror should show the vehicle body. The interior rearview mirror should also be adjusted so that the middle of the rear windshield is visible when looking up.

120

Share

What Causes Power Steering Failure?

Power steering failure can be caused by a leaking power steering booster, insufficient power steering fluid, or a damaged power steering pump. For hydraulic power steering systems, it is necessary to check whether the pump belt is too loose or has come off. For electronic power steering systems, it is also important to inspect the motor or wiring for any issues. Below is an extended explanation: 1. Introduction to Power Steering: Power steering assists the driver in adjusting the car's direction, reducing the effort required to turn the steering wheel. It also plays a role in the safety and fuel efficiency of the vehicle. Currently, the power steering systems installed in cars can be broadly categorized into three types: mechanical hydraulic power steering systems, electro-hydraulic power steering systems, and electric power steering systems. 2. Introduction to Hydraulic Power Steering Systems: Mechanical hydraulic power steering systems generally consist of components such as a hydraulic pump, oil pipes, a pressure and flow control valve body, a V-type drive belt, and a fluid reservoir. This system operates continuously, whether the car is turning or not, and requires the hydraulic pump to deliver more power at lower speeds during sharp turns to provide greater assistance.

118

Share

What Does the Honda Black Badge Represent?

Honda black badge represents Chevrolet vehicles. The black badge Chevrolet is also an exclusive emblem for Chevrolet's performance sports models. Here is some extended information: 1. Black Badge Honda: Chevrolet is a very common car brand, but the black badge Chevrolet is quite different from the ordinary ones, belonging to the coupe series with a hefty price tag, making it a luxury car. So if you encounter one, it's best to keep your distance. 2. Red Badge Honda: This type of vehicle is Honda's high-performance model. Due to its higher power configuration compared to ordinary Honda cars, it also comes with a higher price tag, making it a relatively affordable coupe. The starting price generally reaches 500,000, which is higher than that of ordinary Honda cars.

107

Share

What to Do When the Car Air Conditioner Stops Blowing Air After Running for an Hour?

There are several possible reasons why a car air conditioner stops blowing air after running for an hour: 1. Poor heat dissipation of the air conditioner, slow fan speed, or a dirty air conditioner. 2. Compressor damage. 3. Damage to the compressor's overheating protector. 4. Temperature sensor failure. 5. Insufficient refrigerant, leading to poor cooling performance. Here is some additional information: 1. The indoor temperature should not be set too low, as it may be harmful to the human body; adjust the temperature appropriately. 2. If the indoor temperature feels too high, you can lower the set temperature slightly. 3. Effective use of the timer can achieve both energy savings and comfort.

114

Share

How often should BMW spark plugs be replaced?

Under normal circumstances, spark plugs should be replaced every two years or 40,000 kilometers. If spark plugs are not replaced for a long time, it can lead to various issues such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, which affects the normal operation of the vehicle. Spark plug replacement cycle: Under normal maintenance conditions, spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. For reference, the following standards can be used for maintenance and replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the engine's plastic cover, and remove the high-voltage ignition wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any external debris like leaves or dust and ensure they are cleaned thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage ignition wires according to the firing order, and finally, secure the cover back in place.

119

Share

What is the power supply voltage of a dash cam?

The voltage of a dash cam is generally 5 volts, while the output voltage of all ports in a car is 12V DC. Normally, a dash cam can be paired with a step-down cable or a cigarette lighter port, both of which have the function of a DC transformer. Therefore, connecting the dash cam to the cigarette lighter port or using a step-down cable allows the 5-volt dash cam to operate normally with the 12V power supply. If the dash cam is connected to the fuse box using a step-down cable, the advantages include: the step-down cable is longer, allowing for exposed wiring with good concealment, stable voltage, and it does not occupy the cigarette lighter port. Additionally, connecting to constant power via the step-down cable enables the dash cam to have parking monitoring functionality after the car is turned off. The disadvantage is that if the dash cam lacks a low-voltage protection feature, prolonged parking may lead to battery drain. Most dash cams opt for the cigarette lighter port for power supply. The advantages include convenient power access and easy installation. After parking and turning off the car, the car battery stops supplying power, and the dash cam shuts down, which benefits battery charge retention. The disadvantages are that the parking monitoring feature of the dash cam becomes ineffective, using the cigarette lighter port for power occupies the car charger, inconveniencing other electrical devices, and may expose some wiring, affecting the vehicle's aesthetics. In summary, whether using a step-down cable or connecting to the cigarette lighter port, the prerequisite for both is to ensure the connection is made under voltage reduction to guarantee the normal operation of the dash cam.

103

Share