How to remove the wiper of BAIC EU5?

1 Answers
RachelLynn
07/30/25 12:38am
Lift the metal wiper arm away from the windshield and keep it steady in a position perpendicular to the windshield; Then press the tab and remove the old wiper blade, separating it from the metal arm, and insert the new wiper; Gently rotate the new wiper blade until the hook snaps into place to secure it, then place the wiper blade back on the windshield. The swinging motion is achieved using a worm gear reducer connected to the motor.
Was this review help?
5
3
Share
More Forum Discussions

Should the timing mark on the 474 engine camshaft align with e or i?

474 engine camshaft timing mark aligns with e. The 474 engine camshaft pulley has two grooves on its inner diameter, which fit over a small protruding tab on the camshaft. Generally, factory-set vehicles have the e point on the camshaft pulley inner diameter engaged with the camshaft, meaning the timing corresponds to the e point. The 474 engine camshaft has two timing marks: e and i. The e mark indicates the fourth cylinder, while the i mark indicates the first cylinder. There are corresponding marks on the valve cover, and the camshaft has a pin with notches for both e and i positions. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), and electric motors.
18
5
Share

What Causes the Jerking Sensation When Releasing the Throttle in a BMW?

Introduction to the reasons for jerking sensation when releasing the throttle in a BMW: 1. Engine oil passage blockage: The combustion of fuel, which is also the power source of the engine, is determined by the engine's ignition, air intake, and fuel injectors. If the air intake decreases, ignition weakens, or the amount of fuel injected reduces, the power output will be insufficient, leading to a jerking sensation. 2. Jerking sensation during acceleration in automatic transmission vehicles: When you want to accelerate quickly, you need to press the throttle deeply. At this time, the automatic transmission will automatically downshift to increase the engine speed. When the speed reaches a certain level, it will upshift. After upshifting, the speed will drop significantly, resulting in a relatively obvious jerking sensation. This situation is more common in automatic transmission models with fewer gears, such as 4-speed automatic models.
10
2
Share

How to Replace the Car Air Conditioning Filter?

Here are the steps to replace the air conditioning filter: 1. Open the glove compartment and pull down the small hook on the right side. 2. Squeeze both sides of the glove compartment inward to remove it. 3. Release the clips on both sides and pull out the air conditioning filter housing. 4. Remove the old filter, install the new one, and reassemble the glove compartment to complete the process. There are generally two types of air conditioning filters: 1. Standard air conditioning filter: Made from a specific eco-friendly filtration material that undergoes processing and folding, typically appearing as a single white layer. This basic filter primarily prevents dust and particles from entering. 2. Activated carbon air conditioning filter: Constructed with non-woven fabric on both sides sandwiching fine activated carbon particles, forming an activated carbon filter cloth, which is then processed into an air conditioning filter. It utilizes the physical properties of activated carbon to adsorb tiny particles and more harmful substances from the air in a short period as air passes through, offering significantly better filtration than standard filters.
17
0
Share

What do the various lights on a motorcycle dashboard represent?

Motorcycle dashboard lights represent the following: Speedometer: Indicates the motorcycle's traveling speed. Odometer: Records the motorcycle's accumulated mileage. Fuel gauge: Or indicator light shows the amount of fuel stored in the tank. Turn signal indicator: When illuminated, indicates the motorcycle's front and rear turn signals are activated. Neutral indicator When lit, shows the transmission is in neutral position. Dashboard illumination light: Provides necessary lighting for the dashboard during nighttime riding. By observing various indicators on the dashboard while riding, the rider can constantly monitor the motorcycle's operating status. Some motorcycle dashboards also feature an engine oil gauge. When turning the ignition switch to the "L0N" position, if the oil warning light illuminates, engine oil must be replenished.
13
3
Share

What type of vehicle can a P-class driver's license drive?

P-class driver's license is a type of driver's license that permits the holder to operate trams. Driver's licenses are divided into 15 classes: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, P, with each class permitting different types of vehicles. Below are the minimum age requirements for each license class: 1. For C1, C2, and F, the applicant must be between 18 and 70 years old. 2. For C3, C4, D, E, or M, the applicant must be between 18 and 60 years old. 3. For A3, B1, B2, N, or P, the applicant must be between 21 and 50 years old. 4. For A2, the applicant must be between 24 and 50 years old. 5. For A1, the applicant must be between 26 and 50 years old.
15
0
Share

Is 19 kilometers normal for a new car?

19 kilometers is generally normal. Typically, the mileage of a new car is considered normal if it is within 50 kilometers. A new car goes through a break-in period, and here are some precautions to take during this period: 1. Try to avoid emergency braking: Emergency braking not only shocks the braking system during the break-in period but also increases the impact load on the chassis and engine. It is best to avoid emergency braking within the first 300 kilometers of driving. 2. Avoid overloading: If a new car is operated at full load during the break-in period, it can cause damage to the mechanical parts. Therefore, within the first 1000 kilometers of driving, the load should generally not exceed 75%-80% of the rated capacity. 3. High-speed driving: If a new car is driven long distances during the break-in period, the engine's continuous working time will increase, which can easily lead to wear and tear on mechanical parts. It is recommended that when driving at high speeds, the speed should not exceed 120 km/h and the engine speed should not exceed 3000 rpm.
13
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.