How to Remove the Windshield Wiper of Jingyi?
4 Answers
Prepare the necessary tools for removing the windshield wiper: a flat-head screwdriver, a small ratchet, and a 13mm socket. Open the front hood of the car, take out the flat-head screwdriver, and use it to pry off the small black cover of the windshield wiper. Take out the small ratchet, attach the 13mm socket, and remove the nut that secures the windshield wiper. Fold the windshield wiper by hand, hold it firmly, and shake it repeatedly until it loosens, then remove the wiper.
I previously replaced the wiper blades on my Jingyi by myself. Before starting, make sure to prepare: park the car on a flat surface, turn off the engine, and then open the hood or lift and secure the wiper arms. Next, locate the small clip or pin connecting the wiper arm to the windshield. Most Jingyi models use a clip design—gently press or push it outward, but don’t use too much force to avoid breaking it. With a slight pull, the wiper blade should come off. Be careful not to scratch your skin during the process; wearing gloves is safer. After removal, check the connection point for rust or dirt, clean it thoroughly, and then install the new wiper blades. This ensures clear visibility during rainy drives. Doing it yourself saves money and teaches you some handy skills!
When removing the Jingyi wiper blades, safety is paramount. Always ensure the vehicle is parked on a level surface before operation to prevent accidents. First, turn off the engine, then lift and secure the wiper arm to avoid sudden drops that could damage the windshield. Locate the clip at the base of the wiper arm—most models require a simple press to release. The entire process can be done by hand without additional tools, but wearing gloves is recommended to prevent cuts. After removal, inspect the wiper blade for significant wear to determine if replacement is needed; regular maintenance can extend its lifespan. For beginners, proceed step by step, pulling gently to avoid damaging components. Given that Jingyi wipers are prone to aging after years of exposure, timely replacement ensures driving safety.
Removing the JAC Refine wiper blades is actually quite simple, thanks to the clip-on design that allows for easy detachment by hand. First, turn off the engine and park the car on level ground, then lift the wiper arm to expose the connection point. Locate the black clip, press it, and gently pull to remove. If it's tight, spray some lubricant—avoid using excessive force. After removal, it's recommended to clean the glass and arm bracket. If the wiper blades are old, replace them—they're just a few dollars each. Doing it yourself saves time and helps you gain experience.
