How to Remove the Steering Wheel Airbag on a Teana?

[Mario]

The steps to remove the steering wheel airbag on a Teana are: 1. Locate the screw hole on the left side of the steering wheel and loosen it using a T40 tool. Note that the screw cannot be completely removed due to an internal stopper. 2. Find the screw hole on the right side and loosen it with the T40 tool as well. 3. After loosening the fixing screws on both sides, separate the driver's airbag from the steering wheel. It cannot be completely removed at this stage as it is still connected by the clock spring wiring harness. 4. The driver's airbag is also connected to the clock spring wiring harness at the back, which needs to be detached. 5. Use a small flathead screwdriver to release the fixing clip of the wiring harness to make it unfastened. 6. Use the small flathead screwdriver to disengage the yellow locking mechanism of the connector. Note that the yellow part must be released first before the black part underneath can be detached. 7. After releasing the locking mechanism, use the small flathead screwdriver to pry open the black connector part, and then the main airbag can be completely removed.