How to Remove the Spare Tire of Geely Vision?
4 Answers
The method to remove the spare tire of Geely Vision is: The spare tire is located under the trunk cover panel. Open the trunk cover panel and then take it out. It is necessary to regularly inspect the spare tire, mainly checking the tire pressure, wear, and cracks. Before the tread wears to the wear indicator line, the tire should be replaced as soon as possible. Taking the 2020 1.5L Manual Value Edition Vision as an example, its body dimensions are 4599mm in length, 1747mm in width, and 1482mm in height, with a wheelbase of 2615mm. It is equipped with a 1.5L naturally aspirated engine, matched with a 5-speed manual transmission, and the body structure is a 4-door, 5-seater sedan.
Having driven the Geely Vision for so many years, I'm quite familiar with retrieving the spare tire. The first step is to open the trunk door, then lift the floor panel at the bottom to reveal the spare tire compartment. The spare tire is secured on a bracket with a large bolt, so you'll need to find the wrench from the vehicle tool kit—usually an L-shaped tool—insert it and turn counterclockwise a few times to loosen it. Throughout the process, make sure the car is parked steadily, preferably on a flat surface with the engine off and the handbrake engaged for safety and convenience. The spare tire is smaller in size, so after installing it, drive slowly to the repair shop. I also recommend regularly checking the spare tire's air pressure—test it every six months—and storing the tools properly after use. Developing these habits can prevent panic during emergencies, and it's much simpler than you might think. Beginners can learn it in just a few minutes.
I remember a long trip last winter when I had a flat tire and had to pull over to retrieve the spare tire from the trunk. The process was quite smooth: open the trunk, gently lift the bottom cover or carpet, and there lay the spare tire quietly, with the fixing bolt clearly visible. Using the wrench from the tool bag, I slowly turned the bolt counterclockwise, loosened it, and then lifted the spare tire. It was a bit heavy but manageable with one hand. The key is to park the car safely—never operate on a slope to avoid the car sliding. The spare tire is only for temporary use, and the speed should not exceed 70 km/h. After that experience, I developed a habit of regularly maintaining the spare tire, such as checking for cracks with soapy water. Keeping the tools properly stored in their original place can really save time in emergencies.
I just learned how to drive and have already performed the spare tire retrieval steps on a Geely Vision. Simply put: open the trunk lid, remove the bottom cover, and you'll see the spare tire secured in the compartment. Use the wrench from the car tool kit to loosen the bolts by turning counterclockwise, then remove it. Ensure the car is parked on level ground with the handbrake engaged throughout the process. Remember, the spare tire is smaller in size, so avoid driving at high speeds for extended periods. Return the tools to their place after use. Regularly check the spare tire's air pressure.
