How to remove the spare tire of Audi A4?

3 Answers
DiGemma
07/24/25 12:24am
Use the small hook in the car tool to lift along the edge of the opening to open it. The spare tire of Audi A4 can be replaced in the following ways: 1. Lift the wheel cover; loosen the bolts on the tire in a clockwise direction; 3. Use the jack placed at the bottom of the car to lift the car; 5. Replace the tire; 6. Tighten the bolts; 7. Remove the jack and lower the car; 8. Use the tool again to tighten the bolts.
Was this review help?
19
0
Share
Theodore
08/10/25 8:00pm
I've removed the spare tire from my Audi A4 several times, and each time went smoothly. Open the trunk, lift the carpet, and you'll see the spare tire secured underneath. The tool kit is usually right beside it—take it out and use the included wrench to loosen the fixing bolts. Remember to park on level ground and engage the handbrake for safety. Once, I had a tire blowout on the highway, and luckily I had checked the spare tire pressure beforehand. Now I check it every few months. After using the tools, put them back properly so they don't get lost. When removing the spare tire, handle it gently to avoid damaging the rim. The whole process is straightforward and can be done within 15 minutes, even for beginners. Keep in mind that the spare is a compact one—don't drive over 80km/h with it, and get the original tire repaired or replaced as soon as possible after the emergency.
Was this review help?
19
2
Share
Expand All
DiCorey
09/24/25 2:04am
Last time I helped my neighbor remove the spare tire from his A4, it was quite easy. First, clear out the trunk clutter and lift the carpet to reveal the spare tire compartment. Locate the small toolkit containing the wrench, and use it to loosen the retaining nut. Don't use excessive force; gentle rotation will do the trick. On my first attempt, I rushed it and nearly got the tool stuck, so take it slow. Make sure the car is parked on level ground with the handbrake engaged to prevent rolling. After removing the spare, inspect its appearance for any cracks or leaks. Always keep a portable tire pressure gauge handy for roadside use. Spare tires lose pressure over time, so I recommend inflating them quarterly to extend their lifespan and ensure they're ready in an emergency.
Was this review help?
11
3
Share
Expand All
More Forum Discussions

What does it mean when a wrench light comes on in the car?

A wrench light appearing on the car dashboard is a maintenance reminder indicator. This small wrench warning light is set by the car manufacturer to alert the owner that the vehicle requires scheduled maintenance based on mileage. After completing the maintenance, the reminder light needs to be reset following a specific procedure to turn it off. The steps to reset the wrench maintenance light are: 1. With the engine off, press the trip meter reset button located below the tachometer; 2. Turn the ignition to the ON position while holding the trip meter reset button until "SERVICE" appears on the display; 3. Pull out the minute button on the clock and turn it clockwise to show the mileage on the display; 4. Turn off the engine and switch the ignition back to the ON position to complete the reset.
8
4
Share

How to Adjust the Clutch for Subject 2?

Subject 2 clutch adjustment method: The key is to reach the critical value between semi-engagement and neutral coasting with one foot. Different vehicles have different critical points for adjustment. To find this critical value, first engage the gear, then press the clutch until it just enters the gear position, which is the critical point of power engagement. Therefore, slightly lifting the clutch already puts it in semi-engagement. By controlling the position near the limit of semi-engagement, the vehicle speed will naturally reach idle speed. Since the road surface is not absolutely flat—some have pits, bumps, and uneven friction with the ground—it is necessary to place the foot near the critical value between semi-engagement and neutral coasting and make slight adjustments back and forth to maintain a constant speed throughout the entire test process.
2
2
Share

What does the National VI environmental standard mean?

National VI environmental standard refers to the National 4 emission standard, which regulates the content of harmful gases emitted from vehicle exhaust, such as carbon monoxide, hydrocarbons, nitrogen oxides, particulate matter, and soot. To curb the generation of harmful vehicle emissions and encourage manufacturers to improve their product technologies, many countries have established relevant automotive environmental emission standards. The widely adopted European standard is also a reference for China's vehicle emission standards, and based on this, China has introduced national standards that are more suitable for its own conditions. The European emission standards are implemented through the emission regulations of the United Nations Economic Commission for Europe (UNECE) and the emission directives of the European Community (EC), which is now the European Union (EU). The emission regulations are voluntarily recognized by the participating countries of the UNECE, while the emission directives are mandatory for the participating countries of the EC or EU.
2
0
Share

What engine is used in the Dongfeng Fengshen AX5?

Dongfeng Fengshen AX5 is equipped with two engines, one is a 1.4-liter turbocharged engine, and the other is a 1.5-liter turbocharged engine. Here are the detailed specifications: 1.4-liter turbocharged engine: The 1.4-liter turbocharged engine delivers 140 horsepower and a maximum torque of 196 Nm, with the maximum torque available between 1800 to 4500 rpm. The maximum power is achieved at 5500 rpm. It features an aluminum alloy cylinder head and block, paired with a 6-speed dual-clutch transmission. 1.5-liter turbocharged engine: The 1.5-liter turbocharged engine produces 150 horsepower and a maximum torque of 230 Nm, with the maximum torque available between 1800 to 4000 rpm. The maximum power is achieved at 5500 rpm. The dual-clutch transmission offers fast gear shifts and high transmission efficiency, making it suitable for pairing with small-displacement turbocharged engines.
16
0
Share

Where to Find Used Car Parts?

Used car parts can be found in the used car market. Here is some relevant information about used cars: 1. Introduction to used car residual value rate: When buying or selling used cars, it is important to understand a very important indicator, the residual value rate of used cars. The so-called residual value rate of used cars, in layman's terms, refers to the vehicle's value retention. How much a car is worth in the market after several years of use depends on its residual value rate. The higher the residual value rate, the more valuable the used car is. To understand a car's residual value rate, several indicators must be clarified, such as whether the car has a large market presence, whether its color is mainstream, the brand of the vehicle, and the convenience of later maintenance. 2. Precautions for selling used cars: Be sure to sell the vehicle before its insurance expires, otherwise, when trading the used car, an additional insurance cost will be incurred. Secondly, pay attention to the replacement cycle of spare parts.
15
5
Share

What are the trunk dimensions of the Changan CS55?

The trunk depth of the Changan CS55 is 865mm, the width is 1330mm, and the height is 740mm. With the rear seats folded down, the maximum depth reaches 1730mm. Regarding body dimensions: Taking the 2019 Changan CS55 as an example, the body dimensions are 4500mm in length, 1855mm in width, and 1690mm in height, with a wheelbase of 2650mm. It is a compact SUV with a fuel tank capacity of 58L and a curb weight of 1460kg. In terms of powertrain: The 2019 Changan CS55 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 156PS, a maximum torque of 225Nm, and a maximum power output of 115kW. It is paired with a 6-speed manual transmission.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.