How to Remove the Rear Seats of the Tayron?

[Tyler]

The method to remove the rear seats of the Tayron is as follows: 1. Place your hands under the seat cushion and lift it upward; 2. Flip the lifted seat cushion forward; 3. Push the connecting shafts on both ends toward the middle to release the iron shafts from the slots. The Tayron is a mid-size 5-door, 5-seat SUV with the following dimensions: length 4589mm, width 1860mm, height 1660mm, and a wheelbase of 2731mm. It has a fuel tank capacity of 60 liters. The Tayron is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW at 5000 to 6000 rpm and a maximum torque of 250 Nm at 1750 to 3000 rpm. It features front-wheel drive, with a front suspension using MacPherson struts and a rear suspension employing a multi-link independent setup.

[SebastianFitz]

I've removed the rear seats of my Tayron several times myself, mainly to create space for ski gear. First, recline the seat back flat, and you'll find hidden clips or pull tabs underneath. Gently pull them by hand or pry with a screwdriver, then the entire seat can be lifted upward to loosen. Be careful not to use excessive force to avoid breaking plastic parts. It's much easier to clean after removal, and you can also check for rust on the rails. I recommend preparing gloves in advance to protect your fingers from cuts. Regular disassembly can also extend the seat's lifespan, saving you money on maintenance at the repair shop.

[SanLilah]

I have kids at home and often need to clean car seat stains, so I've researched how to remove the rear seats of the Tayron. The key lies in the small hooks or snaps under the seat—just press that hidden mechanism, and the seat will release automatically. Remember to operate gently and keep children away to prevent pinching injuries. After removal, laying down a protective mat is more hygienic. Regular maintenance with occasional removal and cleaning can prevent odor buildup and keep the car air fresher. Safety first—always perform the entire process with the vehicle parked and engine off.

[AmirAnn]

As someone who frequently handles repairs, let me quickly explain how to remove the rear seats of the Tayron. It's basically a two-step process: locate the front lever or bolt at the bottom of the seat, pull it out or loosen it with a little force, and the seat will pop up for removal. It's best to have a small toolkit handy, such as a Phillips screwdriver, and control the force applied to avoid damaging the clips. Disassembly is quite convenient for routine cleaning or installing accessories. After each maintenance, remember to reset and test to ensure secure fixation. Long-term non-removal can lead to dust accumulation and cause strange noises, so developing this habit can save a lot of trouble.

[EmeryDella]

The first time I removed the rear seats of my Tayron by myself, I was a bit nervous, but it turned out to be quite simple after watching a video tutorial. The cushion part usually has hidden clips along the edges—just press and lift to remove it. If you encounter resistance, don’t force it; check for any hidden buttons. After removing it, cleaning out the dirt made me feel much better. I recommend beginners start with a small section to familiarize themselves with the structure before proceeding. The whole process took just five minutes, saving me a trip to the car wash. With more practice, it becomes second nature.

[VanAurora]

I often go camping, and removing the rear seats of the Tharu can create more space for luggage. The seats are typically designed for easy removal—just pull a small tab or turn a knob on the side to detach the entire section. Be sure to lay down padding to protect the metal connection points. After removal, the space instantly doubles, making it ideal for transporting large items like tents. Regular maintenance includes applying lubricant to prevent rust. The process is simple and quick; after safely completing the task, always test the reinstallation.