How to Remove the Rear Seats of Buick Excelle?
2 Answers
To remove the rear seats of the Buick Excelle, detach the two metal rings of the rear seats from the chassis slots and remove the screws securing the rear seats and seatbelt buckles. Below are specific details about the Buick Excelle: 1. Powertrain: Equipped with a 1.3L Ecotec dual-injection engine paired with a CVT intelligent continuously variable transmission, delivering a maximum power of 79kW and a maximum torque of 133Nm. 2. Safety Features: Features a high-strength lightweight body design with high-strength steel accounting for 65% of the structure. It comes standard with airbags, including front dual airbags, front side airbags, and side curtain airbags. In addition to the standard ESP electronic stability control system, it includes HSA hill start assist and SLSC straight-line stability control systems. 3. Dimensions: The new Excelle measures 4468mm in length, 1765mm in width, 1469mm in height, with a wheelbase of 2611mm.
I used to repair my own car, and removing the rear seats of the Buick Excelle is quite simple. The steps are: First, locate a small clip or pull ring at the front of the rear seat cushion, usually hidden under the carpet or in a gap. Pull or press firmly while using your knee to slightly lift the front edge of the seat. If the clip is tight, don’t rush—take your time to avoid damaging the plastic parts. Once the cushion is loose, lift it completely and set it aside. If removing the backrest, open the trunk and check the corners of the seatback for a release lever or button—just push it to detach. Throughout the process, ensure the car is turned off to avoid accidentally triggering the electrical system or alarm. This makes cleaning the seats or modifying the space convenient, saving the hassle of going to a shop. When reinstalling, place the seat back in its original position and press firmly until you hear a click, indicating it’s locked. Then, check for stability. Once you’ve done it once, the experience will make future cleanings or dust removal much easier.