How to Remove the Rear Seat of a Mazda 6?
2 Answers
To remove the rear seat of a Mazda 6, follow these steps: 1. Open the trunk and locate the black handles on both sides. Pull them firmly to fold down the rear seat. 2. Press the middle part of the seat and lift it forcefully from the far left or right side to remove the rear seat. The Mazda 6 has a body size of 4670mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2675mm and a minimum ground clearance of 150mm. It is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 108kW and a maximum torque of 183Nm, paired with a 6-speed manual transmission. The front suspension type is a double-wishbone independent suspension with a stabilizer bar.
Removing the rear seats of a Mazda6 is actually not difficult. First, sit in the car and locate the front part of the seat. Firmly grasp the front sections on both sides of the seat cushion and suddenly lift upwards sharply—this needs to be done on both sides. There are two metal clips underneath securing it, so some force is required to release them. After removing the seat cushion, you'll see two 10mm bolts at the very bottom of the backrest. Use a wrench to unscrew and store them safely. Then, lift the backrest upwards to release the hooks behind. To reinstall, follow the reverse order: first hook the backrest in place, tighten the bolts, then align the seat cushion clips and press them back into position. Throughout the process, be sure to use your core strength to avoid straining your back. Keep all removed parts safe and don't lose them.
