How to Remove the Headrest of a Malibu Car Seat?

[StNadia]

Method to remove the headrest of a Malibu car seat: 1. Press the plastic button below the headrest support rod with your hand; 2. Use the other hand to lift the car headrest upwards continuously; 3. The support rod of the car headrest can then be separated from the seat, and the headrest can be removed. The car headrest is one of the mandatory national vehicle certification testing items, with very strict regulations on aspects such as the material, strength, energy absorption, position, and size of the headrest. The body dimensions of the Malibu are: length 4933mm, width 1854mm, height 1472mm, wheelbase 2829mm, and fuel tank capacity 55l.

[AugustFitz]

Hey, removing the headrest from a Malibu is actually quite simple. I've done it myself several times. Usually there are small buttons or clips on both sides of the headrest posts. First press both buttons simultaneously with your fingers, and while holding them down, gently pull the headrest upward with your other hand. Don't pull too forcefully to avoid jamming or damaging seat components. For older Malibu models, it might be a bit tight - you can try wiggling it slightly before pulling. It's very convenient for cleaning or adjusting the seat position. To reinstall after cleaning, just press the buttons again and align the posts before inserting. Remember, safety first - always check the buttons before operating and never force it. The whole process takes about a minute or two, and you'll get familiar with it after a few tries.

[LeCassandra]

The Malibu's seat headrest design typically features a button mechanism. First, locate the posts at the base of the headrest. Near the inner ends of these posts, there are two small buttons or sliders. Press these buttons simultaneously with your fingers, maintaining pressure, while using your other hand to steadily lift the headrest upwards. It's normal to feel some resistance when pulling, but avoid using excessive force to prevent scratching the interior or breaking the clips. This method is commonly applicable across many vehicles, from the Malibu to other models. When dealing with similar issues myself, I first ensure the buttons aren't clogged or rusty—applying a bit of lubricant can help. After removal, it's best to clean the headrest before reinstalling it, making sure it's properly aligned and securely fastened. The entire process should be done gently, without the need for specialized tools.

[MilesDella]

I just learned this method, and removing the Malibu seat headrest is quite simple. First, check both sides of the pillars for small buttons or grooves. Press the buttons simultaneously with both thumbs, hold them down, and then use your other hand to pull the headrest upward. Apply gradual force while pulling, and it should come out easily. For newer models, the button positions might be slightly higher, so take your time to locate them accurately. After removal, test reinstallation by pushing it back in until you hear a click. Be careful not to rush to avoid damaging the mechanism.