What is the top priority in motor vehicle exhaust emission control?

Are Anti-Slip Chains Useful on Icy Roads?

Anti-slip chains are useful on icy roads. However, different types of anti-slip chains provide varying levels of traction. For large trucks, iron anti-slip chains are more effective when driving on icy and slippery roads, while rubber anti-slip chains are suitable for private cars. Currently, the more common types of anti-slip chains include iron chains, polyurethane (nylon) chains, and rubber chains. Anti-slip chains need to be installed on the drive wheels. For four-wheel-drive vehicles, all four wheels should be equipped with chains. For two-wheel-drive vehicles, installation on the drive wheels is sufficient, though fitting all wheels provides additional stability. After installing the chains, drivers should control their speed, maintaining it below 40 km/h, and avoid sudden acceleration, deceleration, or sharp turns. If driving on normal road surfaces, the anti-slip chains should be removed promptly. Continuing to use chains on dry roads can hinder driving performance, negatively impact the driving and passenger experience, and potentially cause damage to the vehicle.

115

Share

Should You Use Hot or Cold Air to Defog Car Windows in Winter?

In winter, it is better to use hot air to defog car windows. Using cold air to defog the windshield in winter is a quick but temporary solution, while using hot air can fundamentally solve the problem of window fogging. Blowing hot air prevents the fog from reappearing after the hot air is turned off and does not make the occupants feel colder. However, the biggest drawback of using hot air is that it takes a long time to see results. Main principle of hot air defogging: It uses heat to dry the moisture inside the car, ultimately achieving the effect of defogging. However, if the windows are already fogged while driving, turning on the hot air increases the temperature difference between the inside and outside of the car, which can actually make the fog worse. Only after the heat inside the car evaporates all the moisture will the windows become clear.

103

Share

What are the five major production bases of FAW-Volkswagen?

FAW-Volkswagen has five major production bases, namely the Northeast Base in Changchun, the North China Base in Tianjin, the East China Base in Qingdao, the Southwest Base in Chengdu, and the South China Base in Foshan. FAW-Volkswagen Automobile Co., Ltd. was established in February 1991. It is a large-scale passenger vehicle manufacturing joint venture between China FAW Corporation Limited, Volkswagen AG, Audi AG, and Volkswagen (China) Investment Co., Ltd. The automotive products under FAW-Volkswagen include Audi e-tron, Audi A6L, Audi Q5L, Audi A4L, Audi Q3, Audi A3 Limousine, Audi A3 Sportback, Audi Q2L, Magotan GTE, CC, Tayron, T-ROC, Tacqua, all-new Sagitar, Golf, etc.

106

Share

Should the downhill vehicle yield to the uphill vehicle or vice versa?

On narrow slopes, the vehicle going uphill has the right of way. However, if the downhill vehicle has already started descending while the uphill vehicle has not yet begun to ascend, the downhill vehicle should proceed first. When both uphill and downhill vehicles are at the extreme ends of the slope, if the downhill vehicle proceeds first, it can easily lead to dangerous situations, especially when encountering vehicles traveling at high speeds on the slope. Conversely, if the uphill vehicle goes first, even if a traffic accident occurs, the resulting issues would be less severe compared to those caused by a downhill vehicle. When both vehicles are in the middle of the slope, for manual transmission vehicles, having the uphill vehicle yield to the downhill vehicle can easily cause stalling, which is highly prone to leading to dangerous traffic accidents like rolling backward on the slope. Additionally, the uphill vehicle needs to overcome the resistance of the slope, requiring a harder press on the accelerator to generate more engine power and traction to complete the ascent. On the other hand, if the downhill vehicle yields, it only needs to apply the brakes midway.

117

Share

Where is the engine model of Changan CX20 located?

Changan CX20 engine model location: 1. The VIN code of domestic passenger cars can be found under the front windshield on the driver's side. 2. On the vehicle registration certificate, the new registration certificate usually prints the VIN code in the "Chassis Number" column. 3. Other locations: such as insurance policies, various nameplates in the engine compartment, and the driver's side door pillar. The Changan CX20 uses two engines in total, one is a 1.3L naturally aspirated engine, and the other is a 1.4L naturally aspirated engine. The 1.3L naturally aspirated engine delivers 86 horsepower and 110 Nm of maximum torque, while the 1.4L naturally aspirated engine produces 101 horsepower and 131 Nm of maximum torque.

120

Share

Should the Baojun 730 Use 92 or 95 Octane Gasoline?

Baojun 730 should use 92 octane gasoline, as this fuel grade is recommended in the vehicle's official user manual. In addition to checking the appropriate gasoline grade in the user manual, the fuel cap of the Baojun 730 will also indicate the recommended grade. Generally, the fuel grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is higher, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the required gasoline grade. High-compression engines can also be tuned to use lower-octane fuel, as factors like ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Baojun 730 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after refueling. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles designed for low-octane fuel, using higher-octane gasoline will not cause damage, but the increased octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles designed for high-octane fuel, using lower-octane gasoline may cause engine knocking. Due to the significantly lower octane number, the fuel may ignite prematurely during the compression stroke, creating resistance before the spark plug fires. This resistance makes the engine run very unevenly. Mild knocking may only increase noise without significant engine damage, but severe knocking indicates serious engine issues, affecting driving stability and causing abnormal wear on pistons and cylinders, potentially leading to cylinder scoring.

105

Share

What is the top priority in motor vehicle exhaust emission control?

Are Anti-Slip Chains Useful on Icy Roads?

Should You Use Hot or Cold Air to Defog Car Windows in Winter?

What are the five major production bases of FAW-Volkswagen?

Should the downhill vehicle yield to the uphill vehicle or vice versa?

Where is the engine model of Changan CX20 located?

Should the Baojun 730 Use 92 or 95 Octane Gasoline?

Where is the tow hook on the Audi Q5L?

What sports car models does Volkswagen have?

Is it necessary to activate the car networking service?

Does driving at 60 km/h over a pothole damage the suspension?