How to Remove the Glove Box in a Land Rover Range Rover?

2 Answers
LaNadia
07/25/25 5:45am
Land Rover Range Rover glove box removal method: Open the glove box, press the pull rods on both sides firmly toward the center, then the clips can be easily pulled out, and finally remove the screws. The Land Rover Range Rover is a model from Land Rover, which adopts new body and chassis technologies. Whether it's the breadth of off-road capability and passability, or on-road handling and comfort, the vehicle's all-terrain performance is elevated to another level. In terms of body dimensions, the Land Rover Range Rover measures 4999mm in length, 2073mm in width, and 1835mm in height, with a wheelbase of 2922mm. For power, the Land Rover Range Rover is equipped with two engines: a 3.0TV6 and a 5.0TV8, with actual displacements of 2995ml and 5000ml respectively, both featuring mechanical supercharging.
Was this review help?
20
3
Share
Gray
08/10/25 5:52pm
Let me share my personal experience with removing the Land Rover Range Rover glove compartment. First, park the car on a level surface, engage the handbrake, and turn off the engine for safety. Prepare a toolkit with a Phillips screwdriver, a small pry bar, and don't forget gloves. Open the glove compartment door and you'll see several fixing screws, usually located on the sides or at the bottom. Loosen them with the screwdriver, but don't apply too much force to prevent stripping. Gently pull out the glove compartment, being careful with connected wires like those for the interior light or air conditioning ducts – don't yank them or you might break the connections, which can be troublesome. After complete removal, clean out the dust and wipe it down before reinstalling. Tighten the screws and test the opening/closing mechanism several times to ensure it's secure. Keep some spare screws handy in case any get lost. I've done this several times myself and it takes about 15 minutes, though I did break a wire on my first attempt – a lesson learned the hard way. For beginners, I recommend watching video tutorials along with consulting the vehicle manual for smoother operation.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

Is a Cold Tire Pressure of 210 kPa Too Low?

Cold tire pressure of 210 kPa is considered relatively low. Tire Pressure Standards According to the international GBT2978-2008 standard requirements: Standard tires: 2.3-2.5 bar, Reinforced tires: 2.8-2.9 bar, Maximum pressure: Should not exceed 3.5 bar. Meaning of Tire Pressure Tire pressure indicates a vehicle's load capacity. The load capacity depends on tire pressure levels. Based on the relationship between tire load index, pressure, and load capacity, higher tire pressure means greater load capacity, while lower pressure reduces load capacity.
6
0
Share

What Causes Power Loss After Changing Transmission Fluid?

After changing the transmission fluid, the feeling of insufficient power is caused by: fuel system issues or electrical circuit problems. Below are detailed explanations of the causes. Fuel system issues: When the vehicle's power noticeably decreases, it may be due to fuel system problems such as poor fuel injection or inadequate atomization. In severe cases, it might even prevent the vehicle from starting. These issues primarily stem from excessive carbon buildup in the fuel injectors, which can clog the injector needle valves, leading to poor fuel injection or atomization. Electrical circuit problems: Electrical circuit issues mainly include wiring problems and spark plug issues. When vehicle wiring malfunctions, it can affect the operation of certain sensors, potentially causing these problems. Additionally, spark plug issues, primarily excessive carbon buildup and aging, can also lead to insufficient vehicle power when they occur.
5
5
Share

Can I get a motorcycle license if I have a B license?

You can get a motorcycle license if you have a B license. However, you cannot obtain both licenses within one year. Motorcycle license test entry with ID card: Candidates must enter the examination venue with their ID card and admission ticket to take the test. Moderate force: During the answering process, press the keys with moderate force and tap gently. If you press too hard or hold the key for too long, it may result in continuous answers. In such cases, you can press the "Previous Question" button to return to the original answering interface and re-answer. Raise your hand: If you encounter any computer system issues during the test, you can raise your hand to signal and request the invigilator to handle it.
7
1
Share

Is it allowed to reverse at the exit of a service area?

No, reversing at the exit of a service area is not allowed. Reversing at the exit of a highway service area will result in penalty points, specifically 12 points deducted from your driving license. According to Article 82 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicles driving on highways are prohibited from the following behaviors: Reversing or driving in the opposite direction: Reversing, driving in the opposite direction, making U-turns across the central divider, or stopping within the lane; overtaking on ramps, acceleration lanes, or deceleration lanes; driving or stopping on the emergency lane unless in an emergency situation; Test driving or learning to drive: Riding or straddling the lane dividing line or driving on the shoulder; test driving or learning to drive a motor vehicle.
4
5
Share

Can Diesel Vehicles Be Converted to Natural Gas?

Diesel vehicles can be converted to natural gas, specifically to a dual-fuel system. The process involves injecting a slightly higher amount of diesel than idle speed into the cylinder. During compression ignition, an ignition advance device is used to allow the diesel to combust earlier, followed by the injection of natural gas. Natural Gas Vehicles: Natural gas vehicles refer to cars that use natural gas as fuel (including Compressed Natural Gas, CNG, and Liquefied Natural Gas, LNG). Therefore, their engines are specifically designed for natural gas, and the fuel is stored in gas cylinders. Diesel Vehicles: Diesel vehicles refer to cars that use diesel as fuel. Their engines are conventional diesel engines, and the fuel is stored in fuel tanks. Due to the difference in fuel, the fuel supply systems of these vehicles also vary.
18
2
Share

Why is the Audi S4 so value-retentive?

Audi S4 why so value-retentive: 1. Cars are depreciating assets, generally starting to depreciate from the date of purchase. Cars that depreciate slowly are considered relatively more value-retentive. 2. High cost performance. The Audi S4 itself indeed offers high cost performance, making this model very popular in the used car market. 3. Performance car itself. The first batch of used Audi S4 cars are mostly from around 2018. Performance used cars tend to lose value more over time, with the first two years being relatively more value-retentive. 4. The facelift of the new Audi S4. Due to the transition from National V to National VI emission standards, many modifications have been made to the original parts of the Audi S4. As a result, the sound of the new S4 differs significantly from the older models, which is an unacceptable point for performance cars.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.