How to Remove the Door Panel of a Compass?

1 Answers
LiamLee
07/29/25 12:21pm
The method to remove the door panel of a Compass is: 1. Remove the screws fixing the inner door handle; 2. Remove the safety lock knob and the surrounding plastic clips; 3. Start removing the door from the top, disconnect the speaker wires once found, and then the panel can be taken off. The body dimensions of the Compass are: length 4424mm, width 1819mm, height 1635mm, with a wheelbase of 2636mm and a fuel tank capacity of 51 liters. The Compass delivers a maximum power of 127kW and a maximum torque of 270Nm, paired with a 7-speed dual-clutch transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
Was this review help?
19
0
Share
More Forum Discussions

Can the Prado 4000 always use 92 octane gasoline?

The Prado 4000 cannot always use 92 octane gasoline. According to the usage requirements, it should use 95 octane or higher gasoline. Definition of 95 octane gasoline: 95 octane gasoline consists of 95% isooctane and 5% n-heptane. High-compression engines can also use low-octane gasoline, but you should not blindly choose the gasoline grade based on the compression ratio. Instead, follow the manufacturer's requirements for refueling. Difference between 95 and 92 octane gasoline: The main difference lies in the octane rating, with no other essential differences. 95 gasoline is composed of 5% n-heptane and 95% isooctane, while 92 gasoline consists of 8% n-heptane and 92% isooctane. 95 gasoline has a higher octane rating than 92 gasoline. In terms of stability, 95 gasoline burns more easily than 92 gasoline and delivers greater power output compared to 92 octane gasoline.
1
4
Share

What are the engine specifications of the Lynk & Co 03+?

The engine specifications of the Lynk & Co 03+ are as follows: a 1.5T turbocharged engine with a maximum power output of 115 kW and a maximum torque of 245 Nm. The engine reaches its peak power at 5000 rpm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. The engine is paired with a 6-speed manual transmission. In terms of exterior design, the car embodies the brand's urban contrasting aesthetics family design philosophy combined with aerodynamic elements. It largely maintains the signature Lynk & Co design language, featuring split-style headlight clusters, a horizontal front grille, and lower decorative trim.
5
4
Share

What to Do When the Service Brake Fails During Downhill Driving?

Solutions for service brake failure during downhill driving: 1. Stay calm and composed; 2. Utilize engine braking to slow down promptly; 3. Maintain firm control of the steering wheel; 4. Activate the hazard warning flashers as soon as possible; 5. If at night, alternately switch between high and low beams; 6. Pull up the handbrake; 7. Seek softer obstacles to help stop the vehicle. The brake system consists of service brakes (foot brakes) and parking brakes (handbrakes). Service brakes are used during driving to decelerate or stop the vehicle while in motion, not just to keep it stationary. Parking brakes should only be engaged when the service brakes fail. Once the vehicle comes to a complete stop, apply the parking brake to prevent rolling forward or backward.
11
0
Share

What engine does the Chevrolet Aveo use?

The Chevrolet Aveo is equipped with 1.4L and 1.6L naturally aspirated engines. The 1.4L engine delivers a maximum power of 76 kW and a maximum torque of 131 Nm, while the 1.6L engine produces a maximum power of 89 kW and a maximum torque of 155 Nm. These engines are paired with either a 5-speed manual transmission or a 6-speed automatic transmission. The Aveo is a compact car launched by Chevrolet, built on GM's global advanced small car platform. It measures 4378 mm in length, 1735 mm in width, and 1517 mm in height, with a wheelbase of 2525 mm. In terms of suspension, the Aveo features a MacPherson strut front suspension and a torsion beam semi-independent rear suspension with a double-layer tubular V-beam.
12
4
Share

What Causes a Car to Fail to Start in Winter?

Car failure to start in winter is due to the slowed flow of engine oil, freezing of the exhaust pipe, excessive carbon buildup in the throttle, or engine malfunction. In winter, cars need to warm up to lubricate engine components, but prolonged idling to warm up should be avoided. Starting the vehicle without warming up prevents the engine from reaching its optimal operating temperature, which can affect the engine's lifespan. Additionally, the transmission gears require lubrication; warming up allows the gear oil to circulate back to the upper part of the transmission. Driving under lubricated conditions can save fuel and prevent wear on car parts.
7
5
Share

What causes a Volkswagen to have no response when starting?

There are several reasons why a Volkswagen may not respond when starting, including incorrect gear position, low battery power, ignition system failure, or issues with the fuel system. When a vehicle fails to start, it is important to promptly diagnose and fix the problem to avoid further damage to the car. Incorrect gear position: If the gear is not placed correctly when starting, the car may not respond. Only by placing the gear in P (Park) or N (Neutral) can the car be started normally. Low battery power: When the car battery is dead, the car won't start. There are many reasons for a dead battery, such as lack of water in the battery, battery failure, or prolonged use of electrical components. If the vehicle cannot start due to a dead battery, jump-starting can be used to start the car. If the battery is faulty, it should be repaired at a specialized auto repair shop. Ignition system failure: The car's ignition system is responsible for providing high-voltage electricity to the spark plugs at regular intervals to ensure the car runs properly. If the car fails to start and the battery is ruled out, the issue may lie with the ignition system. Poor connections in the low-voltage circuit or leakage in the high-voltage wires can cause ignition system failure, affecting the car's performance and making it difficult to drive. This issue also requires inspection and repair at a repair shop, as ignition system problems are complex and should be handled by professionals. Fuel system issues: Insufficient fuel, fuel pump failure, or fuel line blockage can prevent the car from starting. If the issue is lack of fuel, the fuel gauge on the dashboard should be checked regularly while driving, along with the tachometer and speedometer. If the problem is a faulty fuel pump or blocked fuel line, it is recommended to seek professional auto repair services.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.