How to Remove the Dashboard of Baojun 560?
4 Answers
Baojun 560's dashboard cover is combined with the dashboard through plastic clips. To remove it, simply pry open the gap between the dashboard cover and the dashboard. The specific steps for dashboard removal are as follows: 1. Remove the panel strip above the buttons on the head unit. 2. Remove the panels around the head unit. 3. Take out the clips remaining on the original plastic panel. Notes: The car dashboard mainly serves to fix electrical instruments, protect the safety of drivers and passengers, and reduce noise inside the car. Generally, it is advisable to avoid disassembling the dashboard as much as possible. If disassembly is necessary, try to only disassemble local parts of the dashboard. Vehicles with disassembled dashboards are prone to issues such as abnormal noises, poor sealing, and increased noise due to improper assembly. Disassembling the dashboard does not affect the vehicle's handling and overall performance.
As a car owner who frequently works on my own vehicle, I have personally disassembled the dashboard of a Baojun 560. First, ensure the vehicle is turned off and disconnect the negative terminal of the battery to prevent electrical shorts or accidental airbag deployment. Preparation is crucial—have a Phillips screwdriver, plastic pry tools, and gloves ready. Locate the screw positions along the edges of the dashboard, as there are usually several hidden screws; carefully remove them with the screwdriver. Then, gently pry open the edges of the panel using the pry tools to avoid damaging the plastic clips or scratching the interior. Once opened, you’ll see wiring connectors—do not yank them; instead, press the release tabs to disconnect them. During the process, check for any signs of aging in the wiring behind the dashboard and take the opportunity to clean dust or inspect the dashboard lights. I recommend that beginners take photos to document screw positions to avoid confusion during reassembly. Always prioritize safety—wait at least 5 minutes after disconnecting the battery before starting work to prevent accidents. After reassembly, test all lights and functions to ensure everything is working properly.
I feel that removing the dashboard is a meticulous job that must be done step by step. First, I'll disconnect the battery to prevent electric shock and damage to electronic components, especially the airbag connections in the instrument cluster. Next, I'll remove the lower steering wheel cover, locate the dashboard screws, and loosen all fastening points. The Baojun 560 has numerous screws distributed around, so be careful not to miss those in the corners. Use a pry tool to carefully separate the panels, applying even force to avoid breaking plastic parts. Then handle the wiring connectors, gently unplugging them without using excessive force to prevent bending the internal pins. During this process, check the insulation of the wiring and replace any aging harnesses to avoid future issues. When reassembling, ensure the clips are properly aligned to prevent rattling noises. Patience is key throughout the operation—I've seen people rush the disassembly and end up damaging panels, costing more for replacements. For safety, wear goggles and gloves throughout the process for added peace of mind.
To remove the Baojun 560 dashboard, I first disconnect the negative battery terminal for safety. Prepare a Phillips screwdriver and pry tools to begin. When removing screws, pay attention to their positions and quantities to avoid mistakes. Gently pry open the panel edges to prevent damaging the plastic. Before unplugging electrical connectors, examine their structure and release the clips properly—avoid pulling forcefully. After completion, clean internal dust and consider upgrading accessories like adding light strips for aesthetics. The process is straightforward but requires attention to detail. Ensure all functions are tested properly after each step to avoid rework. Choosing the right tools, such as soft-tip pry bars, is crucial.
