···
Log in / Register

How to remove the air conditioning filter of Chery QQ?

6Answers
StPaisley
07/29/2025, 06:13:46 PM

The method to remove the air conditioning filter of Chery QQ is as follows: 1. Open the glove box cover; 2. Locate the fixing buckle on the right side of the glove box and pull it outward with force; 3. Remove the fixing buckle of the glove box cover to detach it; 4. Squeeze both sides of the glove box towards the middle and then remove it; 5. Press the fixing buckles on both sides of the cover plate with force and pull the air conditioning filter outward. Taking the Chery QQ 2013 model as an example, its body dimensions are: length 3564mm, width 1620mm, height 1527mm, wheelbase 2340mm, minimum ground clearance 130mm, fuel tank capacity 35l, and the body structure is a 5-door 5-seat hatchback.

Was this review help?
110
Share
Blanco
08/15/2025, 06:32:34 PM

I've been driving a Chery QQ for ten years, and replacing the air conditioning filter is actually quite simple. First, open the glove box, and you'll see screws or clips on the right side of the box. Use a small screwdriver to easily unscrew or pry them open. Then, the filter compartment will be exposed at the bottom of the box. Gently pull out the old filter, making sure not to reverse the direction arrow to avoid mistakes when installing the new one. Before putting it back, it's best to wipe the surrounding dust with a soft cloth to keep it clean. I often do this job myself, changing it every six months, which not only saves money on repair shops but also keeps the air in the car much fresher, especially for family cars. It's best to replace the filter before the high temperatures of summer or before winter—don't wait until the odor becomes strong, as it can affect your health. The whole process takes only ten minutes, and all you need is a screwdriver.

Was this review help?
13
Share
Expand All
StRicardo
10/17/2025, 04:21:49 AM

I love DIY when it comes to removing the cabin air filter of my Chery QQ—it's super easy! All you need is a screwdriver. Open the glove box, unscrew the fastening screws or unclip the fasteners, and the filter can be pulled out directly. Check if there's heavy dust buildup. Before replacing it with a new one, remember to check the arrow direction on the filter cover to ensure proper orientation. After installing the new filter, push it back into place and tighten the screws. The whole process takes just five minutes—just be careful not to let debris fall into the ducts. Regular replacement like this extends the AC system's lifespan. I always check the airflow level while at it to prevent musty odors. It saves money and time while honing your hands-on skills—perfect for young people to try. Don’t worry about making mistakes; the plastic parts are hard to break anyway.

Was this review help?
3
Share
Expand All
StKiara
11/30/2025, 09:17:08 PM

I'm used to removing the QQ's air conditioning filter by myself, and being careful is always the right approach. It's safer to operate after the car is turned off. Open the glove box to locate the filter position, usually secured by screws on the right side—just loosen them to pull out the filter. Gently remove the old part without using excessive force, then check its condition to decide whether to replace it. When reinstalling, make sure the arrow direction aligns with the air vent to prevent airflow blockage. The whole process takes about ten minutes, with just a screwdriver and gloves for dust protection. Regular maintenance helps prevent bacteria, and health is more important.

Was this review help?
15
Share
Expand All
LaRemington
01/20/2026, 10:41:01 PM

Replacing the air conditioning filter is an eco-friendly habit. I found it extremely easy when I removed the filter from my Chery QQ. Just open the glove compartment, loosen the screws to remove the clips, and the filter is located at the back of the compartment for replacement. Opt for a new filter with activated carbon to reduce pollution, and the air will feel fresh immediately after installation. It's recommended to replace it at the beginning of each season for better fuel efficiency and health.

Was this review help?
2
Share
Expand All
DeOwen
04/16/2026, 11:09:11 PM

As a DIY repair enthusiast, I find removing the Chery QQ's cabin air filter incredibly practical. Just open the glove box, and the filter housing is right there – loosen the screws or clips to easily pull out the old filter. The whole process only requires a screwdriver and takes under five minutes. Just make sure to match the correct filter model when purchasing and don't install it backwards (check the airflow arrow indicator). After replacement, the AC airflow becomes more efficient, saving you from costly repairs later. I always consult the manual before changing it to ensure proper procedure – truly a money and hassle-saving maintenance worth doing.

Was this review help?
17
Share
Expand All
More Q&A

How to Identify the Year of a Car from Its VIN?

The Vehicle Identification Number (VIN) is the unique identifier for a car, often referred to as the 'car's ID card.' It contains crucial information about the vehicle, including the country of origin, manufacturer, engine model, vehicle type, and production year. The details are as follows: 1. The first digit: Indicates the country or region where the vehicle was manufactured. 2. The second digit: Represents the car manufacturer. 3. The third digit: Denotes the vehicle type. 4. The fourth to eighth digits: Describe vehicle characteristics, such as model, body style, series, and type. 5. The ninth digit is a check digit: It must be verified according to the 'World Manufacturer Identifier (VIN) Manual.' 6. The tenth digit represents the year: This indicates the model year of the car.
120
Share

What is the 0-100 km/h acceleration time of the Binrui 1.4T?

According to official data, the 2021 Binrui 1.4T has a 0-100 km/h acceleration time of 8.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The 2021 Santana has a maximum torque of 145 Nm and a 0-100 km/h acceleration time of 12.6 seconds, while the 2021 Binrui 1.4T model has a maximum torque of 235 Nm and a 0-100 km/h acceleration time of 8.9 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission (MT) > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The 2021 Binrui 1.4T is equipped with a manual transmission (MT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (unit: Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The 2021 Santana has a power-to-weight ratio of 100 Hp/T and a 0-100 km/h acceleration time of 12.6 seconds, while the 2021 Binrui 1.4T model has a power-to-weight ratio of 111 Hp/T and a 0-100 km/h acceleration time of 8.9 seconds.
111
Share

How to Use Cruise Control in the 12th Generation Crown?

Press the control switch to activate the cruise control standby mode. After accelerating to the desired speed, push the control lever downward to set the cruising speed. To accelerate, push the control lever upward or press the accelerator pedal. To cancel cruise control, lift the control lever upward or turn off the main cruise control switch. Press the cruise control button, and the car will maintain a steady speed. Pressing the brake pedal will immediately deactivate this function. Fine-tune the speed by increasing or decreasing it slightly. After pressing the main cruise control switch, the cruise control icon will appear on the dashboard to indicate standby mode. Gently pressing the brake pedal will cancel the cruise control status.
102
Share

What are the differences between Toyota Wildlander and Highlander?

The differences between Toyota Wildlander and Highlander: 1. Different positioning: Toyota Wildlander is a compact SUV; Highlander is a midsize SUV. 2. Different body dimensions: The length, width, and height of the Toyota Wildlander are 4665mm, 1855mm, and 1680mm respectively; The length, width, and height of the Highlander are 4890mm, 1925mm, and 1720mm respectively. 3. Different engine configurations: The Toyota Wildlander is equipped with a 2.0L naturally aspirated engine with a maximum power of 126kW and a maximum torque of 209Nm; The Highlander is equipped with a 2.0T turbocharged engine with a maximum power of 162kW and a maximum torque of 350Nm.
107
Share

What causes cutting corners during right-angle turns?

The reasons for cutting corners during right-angle turns include: incorrect starting position for the turn, insufficient space; driving too fast, resulting in delayed steering wheel response; failure to accurately identify reference points, inadequate space reserved on either side, making it easy to cross the left or right boundary line. Poor choice of starting position: The main issue is not accurately determining the wheel position during practice, causing the left wheel to be too close to the boundary line when reaching the turning point. Even with perfect timing on steering, the left rear wheel may still cross the line due to the inner wheel difference. It is recommended to adjust the vehicle's position properly, leaving more space on the left side to pass more safely. Excessive speed and delayed reaction: Subject 2 of the driving test does not impose strict time limits. During practice, you can drive slightly faster to improve your reaction skills. However, during the actual test, it is advisable to slow down, as this makes it easier to locate reference points and allows for more composed steering.
107
Share

What is the difference between DJM and EA211?

The differences between DJM and EA211 are as follows: 1. Different references: EA211 does not refer to a specific engine, it is an engine platform under Volkswagen, serving as the general code for all Volkswagen engines with displacements below 1.6 liters; DJM is a 1.5-liter naturally aspirated engine under the EA211 platform, matched with models such as Santana, Jetta, and Bora. 2. Different engines included: EA211 is an engine developed by Volkswagen based on the MQB platform, including 1.4L four-cylinder turbocharged engines, 1.6L four-cylinder naturally aspirated engines, 1.0L three-cylinder naturally aspirated engines, and 1.2L four-cylinder turbocharged engines, mainly installed in compact cars such as Polo, Golf, Lavida, and Bora. DJM is a sub-model of the EA211 engine, belonging to the 1.5-liter naturally aspirated version, currently installed in the new Bora model. It has a maximum horsepower of 116 hp, a maximum power of 85 kW, and a maximum torque of 150 N·m, making it an economical engine.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.