How to Remove Marker Stains from a Car?

2 Answers
McAlex
07/28/25 9:01pm
Marker stains on a car can be removed using the following methods: 1. Markers can be either water-based or oil-based. Water-based marker stains can be wiped off with a towel dampened with clean water. Oil-based ink can be dissolved in organic solvents such as methanol, ethanol, or toluene. 2. However, these substances are not easily accessible and can be harmful to human health. Car owners can use alternatives like alcohol, essential balm, or gasoline. Dampen a towel or tissue with these substances and gently wipe the stain repeatedly with even pressure to dissolve the ink and effectively remove the marks. After wiping, use a clean tissue to dry off any remaining alcohol, essential balm, or gasoline.
Was this review help?
7
5
Share
HoldenRose
08/12/25 1:43am
Yesterday, I just finished removing the marker stains on my car door. I used some household alcohol poured onto a towel and gently wiped, and the marks disappeared quickly. Remember to use gentle motions and avoid rubbing too hard, as it can easily scratch the paint, especially on darker-colored cars. If alcohol doesn’t work, buy a bottle of ink remover, usually available in large supermarkets—spray it on, wait two minutes, and then wipe it off. An important tip: First, test the solvent on a small, hidden area like the tire to ensure it doesn’t damage the paint before using it widely. After cleaning, rinse the car body with clean water and apply wax for protection. I always check the paint condition after cleaning and polish any scratches immediately. Also, parking away from graffiti-prone areas can help prevent such issues in the future.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

What does the number of subject one test site reservations mean?

Subject one test site reservation count refers to the number of times you have scheduled the subject one test. The subject one test content includes: basic driving theory, road safety laws and regulations, local regulations, and other related knowledge. The subject one test question bank contains over 1,300 questions, and the test randomly selects questions from this pool, so every question could potentially appear on the exam. Below is an introduction to the four test subjects: 1. Subject one: Also known as the subject one theory test or driver theory test, it is part of the motor vehicle driver's license assessment. 2. Subject two: Also known as the small road test, it includes five test items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. 3. Subject three: Also known as the big road test, it assesses road driving skills for motor vehicle drivers. 4. Subject four: Also known as the subject four theory test or driver theory test.
8
4
Share

What is the displacement of the Lynk & Co 03?

Lynk & Co 03 has displacements of 1.5L and 2.0L. Below is a partial introduction to related content: 1. In terms of power, this car uses three engines in total, namely a low-power version 1.5L turbocharged engine, a high-power version 1.5L turbocharged engine, and a 2.0L turbocharged engine. 2. The Lynk & Co 03 is a sedan product of the Lynk & Co brand, with dimensions of 4639mm in length, 1840mm in width, and 1460mm in height, and a wheelbase of 2730mm. 3. In terms of appearance, this car basically maintains the Lynk & Co family design style, featuring a split-type headlight cluster at the front, paired with a horizontal front grille and lower trim. 4. For the suspension, this car uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
17
5
Share

How to fold down the rear seats of the Sagitar and why are they not level with the trunk?

Sagitar rear seat folding method: Open the trunk, and slightly below the body groove under the glass, there are two black plastic components, one on each side. Pull the locking mechanism, and the seats can be folded down. The Sagitar rear seats feature a 6/4 split-folding function, which enhances mobility flexibility and increases trunk capacity. Large items no longer require consideration for storage space, making transportation more convenient. Below is an introduction to this section: 1. Split-folding rear seats refer to the ability to fold down the seatbacks in a certain ratio. Compared to folding down the entire rear seat, split-folding offers higher flexibility, allowing only half of the seatback to be folded down for large items while the remaining part can still accommodate passengers. 2. Full-folding rear seats mean the seatbacks are a single unit. When larger objects require more space, the entire rear seatback can be folded down to gain additional room. The drawback of full-folding rear seats is that when they are folded down, the rear seats cannot accommodate passengers.
12
4
Share

Is 90 degrees Celsius normal for Volkswagen car's water temperature?

Volkswagen car's water temperature at 90 degrees Celsius is normal. Below is an extended introduction: 1. Detailed introduction to the water temperature gauge: When the vehicle is started and during driving, a water temperature of around 90-100 degrees Celsius is normal. The Volkswagen water temperature gauge is displayed on the dashboard. The water temperature gauge is a digital gauge, ranging from 50-130 degrees Celsius. A water temperature gauge alarm alerts the owner to issues with the engine cooling system or a lack of coolant. Insufficient coolant in the radiator can cause the engine to overheat, leading to engine seizure or cylinder explosion (engine boiling). 2. Solutions for excessively high water temperature gauge readings: 1) Insufficient coolant in the cooling system causing the engine to overheat. Stop the vehicle, wait for the engine to cool down, and add coolant. 2) Loose or broken water pump or fan belt causing the engine to overheat. Visit a repair shop to replace the relevant parts. 3) Radiator guard mesh or radiator core ventilation ducts blocked by debris, resulting in poor heat dissipation and causing the engine to overheat. Replace the radiator guard or clean the debris. 4) Insufficient engine oil or substandard oil quality causing the engine to overheat. Simply replace with high-quality engine oil.
19
3
Share

How to Fix Heavy Steering Wheel in Polo?

A heavy steering wheel in a Polo is generally caused by insufficient lubrication in the steering gear, which increases friction. In this case, simply removing the car's steering gear and lubricating it can resolve the issue. More details are as follows: 1. The main reason for a heavy steering wheel is a malfunction in the steering gear. There are several causes for steering gear failure, including lack of lubrication, detachment of the steering gear rubber sleeve, or loosening of the steering gear gears. The specific issue should be diagnosed and repaired by professionals at a repair shop or 4S dealership. 2. Besides steering gear failure, insufficient tire pressure can also cause a heavy steering wheel, as it increases friction between the tires and the road. In such cases, promptly inflating the tires is necessary. The recommended tire pressure typically ranges between 2.3 bar and 2.6 bar. 3. If the front-wheel stabilizer link is damaged, it can affect the car's steering, leading to heavier steering wheel resistance. In this scenario, the stabilizer link should be replaced immediately. Additionally, if the front shock absorbers are damaged, they can also impair the car's steering ability, requiring professional inspection.
8
4
Share

Where is the charging location for CRH380BL?

crh380bl charging locations are as follows: 1. Second-class seat power sockets: The power outlet positions in 'Fuxing' second-class seats. The latest models like 'Fuxing' and 'Dongganhao' trains not only have power outlets but also USB ports. Location: Between two adjacent seat cushions, below the armrest. There's 1 socket for every 2 seats and 2 sockets for every 3 seats, with both two-hole and three-hole options, plus newly added USB ports. 2. First-class seat power socket locations: These are more densely distributed than in second-class, mostly positioned either in front of the seat armrest or beneath the seat. For sleeper berths: The most distinctive among new longitudinal sleeper EMUs is the CRH2E model, featuring berths arranged parallel to the train's direction (unlike traditional transverse sleepers). Each window-side berth has independent charging sockets and USB ports at the 'bedhead' area. Traditional transverse sleepers follow the same power socket arrangement as second-class seats (varies by model), typically located under the center foldable table or at the 'foot' of the berth. Public area sockets: If your seat lacks outlets, charging points can be found at oversized luggage areas and washbasins.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.