How to Remove a Car Roof Liner?

What causes the engine light to turn yellow after refueling a car?

When the engine light turns yellow after refueling a car, it is usually due to poor fuel quality. The solution is to drain all the poor-quality fuel and replace it with high-quality fuel. After starting the engine for about 30 seconds, the engine fault light will automatically turn off. Engines have specific requirements for fuel quality, especially as regulations and standards for engines become increasingly stringent, leading to higher demands on fuel quality. Fuel quality is the primary factor causing the engine fault light to illuminate. The anti-knock property of gasoline is indicated by its octane rating—the higher the octane number, the better the anti-knock performance. For example, 97-octane gasoline has an octane rating of no less than 97. Leaded gasoline can cause lead poisoning in oxygen sensors. Therefore, poor fuel quality is the main reason for insufficient engine combustion, leading to the illumination of the engine fault light.

17

5

Share

What does it mean when the ESP light comes on in a car?

The illumination of the ESP light in a car indicates that there may be a malfunction in the Electronic Stability Program system. Since ESP is not an independent system, it typically shares sensors with other electronic devices such as ABS and TCS. It could also be caused by damage to other functions. In such cases, it is recommended to send the vehicle to a 4S shop for inspection as soon as possible. ESP, also known as Electronic Stability Program, analyzes the vehicle's driving state information transmitted from various sensors and then sends correction instructions to systems like ABS and EBD to help maintain dynamic balance. ESP can keep the vehicle in optimal stability under various conditions, with more noticeable effects in cases of oversteering or understeering.

12

3

Share

What is the purpose of the N gear in an automatic transmission car?

In automatic transmission vehicles, the N gear is one of the three standard gear positions, located between the R (Reverse) and D (Drive) gears on the gear shift console. Essentially, it serves as the neutral gear in the transmission, disconnecting the power transmission between the input and output shafts of the gearbox. When temporarily stopping for more than twenty or thirty seconds on flat or slightly inclined roads, it is advisable to first engage the handbrake and then shift to N gear. This practice helps reduce driving fatigue caused by prolonged braking with the right foot and prevents sudden vehicle movement due to accidental release of the brake pedal, which could lead to collisions. When restarting from an N gear stop, whether moving forward or backward, only a single gear shift is required, making the process more convenient and less prone to errors.

4

Share

What are the body dimensions of the Haval H6?

The body dimensions of the Haval H6 are 4640mm in length, 1825mm in width, and 1690mm in height, with a wheelbase of 2680mm. The Haval H6 is a compact SUV, equipped with two engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine, coded GW4B15A, delivers 169 horsepower and 285 Nm of torque, with a maximum power output at 5000 to 5600 rpm and maximum torque at 1400 to 3000 rpm. This engine is paired with a 7-speed dual-clutch transmission. The 2.0-liter turbocharged engine, coded GW4C20B, produces 224 horsepower and 385 Nm of torque, with a maximum power output at 5500 rpm and maximum torque at 1600 to 3600 rpm. This engine is also matched with a 7-speed dual-clutch transmission.

6

5

Share

What are the reasons why the Nissan Tiida won't start?

Nissan Tiida won't start for the following reasons: 1. No fuel in the vehicle: The dashboard will display this situation, and it can be resolved by refueling at a gas station. 2. Wrong gear position: When starting the car, the gear must be placed in P or N position, otherwise the car won't start. If this is the case, simply adjust the gear to the correct position. Additionally, for manual transmission cars, the clutch must be pressed to start the engine. 3. Dead car battery: In this case, the battery needs to be charged. Car owners should regularly check and replace the battery. 4. Spark plug issues: The owner can unscrew the spark plug, clean it, and then reinstall it to resolve the issue.

13

5

Share

What is the Scoring Standard for Subject 2?

Subject 2 scoring standard is based on the in-field driving test, which only has pass or fail results. Below is additional information: 1. Test sequence: hill start and stop at a designated point, parallel parking, curve driving, right-angle turn, and reverse parking. 2. Deduction criteria: not wearing a seatbelt deducts 100 points, not closing the car door properly deducts 100 points, not using the turn signal when starting, turning, changing lanes, overtaking, or stopping, or using it for less than 3 seconds, deducts 10 points. Stalling the engine once deducts 10 points. 3. Venue requirements: the slope of the steep hill must be greater than or equal to 10 degrees, and the length of the steep hill must be greater than or equal to 20 meters. During the test, after stopping on the steep hill, the candidate must start within 30 seconds, otherwise it is considered a failure.

1

5

Share

How to Remove a Car Roof Liner?

What causes the engine light to turn yellow after refueling a car?

What does it mean when the ESP light comes on in a car?

What is the purpose of the N gear in an automatic transmission car?

What are the body dimensions of the Haval H6?

What are the reasons why the Nissan Tiida won't start?

What is the Scoring Standard for Subject 2?

How to Use the Buick LaCrosse Navigation System?

How to Determine if a Car's Timing Chain is Stretched?

How to Open the Trunk of a Volkswagen Polo?

What is the tire size of the Hongqi H5?