How to Protect Your Car from Sun in Summer?

2 Answers
Johnathan
07/25/25 5:32am
Methods to protect your car from the sun in summer: 1. Park your car in the shade or use building shadows to avoid direct sunlight; 2. Hang a car sunshade net; 3. Use a car sunshade umbrella; 4. When parking outdoors in summer, try to leave a small gap in the windows. If the car is exposed to direct sunlight, lower the window glass slightly, just enough to prevent hands from reaching in, to maintain air circulation inside and outside the car and avoid excessive interior temperatures; 5. For the front windshield sunshade, choose a product with a silver reflective insulation layer, which will reflect most of the sunlight and improve the sun protection and insulation effect inside the car; 6. A full car cover can provide all-around sun protection for the car, which is more suitable for long-term parking.
Was this review help?
7
3
Share
AlexFitz
08/10/25 5:46pm
In summer, my car tends to get as hot as a steamer, so I habitually start with parking strategies. If there's an indoor garage at work or home, I prioritize parking inside to avoid direct sunlight. When parking outdoors, I look for the shade of a big tree or a building—simple but effective. Placing a silver sunshade on the windshield is super practical—it not only blocks heat but also prevents the dashboard from cracking and aging. I always keep foldable window shades on hand; pulling them up immediately lowers the interior temperature significantly. Another tip is timing ventilation—opening the windows about ten minutes in advance to let hot air escape before slowly turning on the AC, which cools faster and saves energy. Car washing is also crucial—regularly cleaning dust off the body prevents dirt from absorbing extra heat. After adopting these small habits, my car feels much more comfortable in summer, and the interior lasts longer.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

Why is the warm air not hot in Roewe RX5?

The reasons why the warm air is not hot in Roewe RX5 are: 1. Lack of coolant; 2. Internal blockage of the radiator; 3. Damage to the water pump impeller; 4. Air resistance in the engine cooling system. The solutions for the warm air not being hot in Roewe RX5 are: 1. Add or replace the coolant; 2. Clean the internal debris in the radiator; 3. Replace the water pump impeller; 4. Replace the cylinder gasket. Taking the 2020 Roewe RX5 as an example, it is a compact SUV with body dimensions of: length 4556mm, width 1855mm, height 1719mm, wheelbase 2700mm, minimum ground clearance 175mm, and fuel tank capacity 55l.
16
4
Share

What Causes the Seat Belt Noise in the Car B-Pillar?

The noise from the seat belt in the car B-pillar is caused by friction between the seat belt buckle and the seat. The function of the seat belt is: when the vehicle collides or emergency braking is applied, the pre-tensioning device instantly tightens the loose seat belt, firmly securing the occupant to the seat to prevent secondary collisions. The method for replacing the seat belt is: 1. Locate the wiring under the car seat and find the sensor wire for the seat belt buckle; 2. Remove the seat cushion, detach the airbag, find the bolt securing the seat belt, and remove the seat belt buckle; 3. Locate the seat cushion sensor inside the seat cushion and remove it; 4. Install the new seat belt buckle onto the seat and insert the bolt; 5. Install the weight sensor on the car seat, then attach the new retractor and tighten it with a wrench; 6. Reinstall the seat cushion onto the car seat and arrange the wiring at the bottom of the seat properly.
17
3
Share

How to Use the Manual Anti-glare Function of the Interior Rearview Mirror?

The method to use the manual anti-glare function of the interior rearview mirror is: 1. Pull the lever behind the interior mirror backward to activate the anti-glare function; 2. Push the lever forward to deactivate the anti-glare function. The interior rearview mirror consists of a mirror shell, protective cover, base plate, adjustment motor, folding motor, folding pin shaft, turn signal, wiring harness, cable, adjustment handle rod, sealing pad, adjustment support, adjustment bracket, mirror glass, and heating element. The functions of the interior rearview mirror are: 1. Observing the situation of vehicles behind through the interior rearview mirror and confirming safety before changing lanes; 2. Checking the rearview mirror during emergency braking to avoid rear-end collisions; 3. Judging the distance from the vehicle behind to reduce the occurrence of traffic accidents.
8
2
Share

What are the handling methods for brake failure in automatic transmission vehicles?

Automatic transmission vehicles' brake failure handling methods are: 1. Release the accelerator pedal and depress the clutch; 2. Activate the vehicle's warning lights and choose the emergency lane for braking; 3. Use road obstacles as buffer barriers for vehicle braking. The working principle of brake pads is to utilize the friction between the brake pads and brake drum, as well as between the tires and the ground, converting the vehicle's kinetic energy into heat energy through friction to bring the vehicle to a stop. Methods for reversing an automatic transmission vehicle: 1. Depress the brake to stop the vehicle completely, press the lock switch on the gear lever to shift to R gear; 2. Observe the rearview mirrors and reversing camera to confirm there are no obstacles behind the vehicle, and also sound the horn twice to alert nearby pedestrians and vehicles; 3. Gradually release the brake to allow the vehicle to move at a lower speed.
13
5
Share

What is the reason for the ABS light coming on and then disappearing after restarting?

The reasons why the ABS light comes on and then disappears after restarting are: 1. The vehicle's ABS sensor is malfunctioning; 2. The vehicle's onboard computer is giving a false alarm. The solutions for the ABS light coming on are: 1. Inspect and replace the wheel speed sensor; 2. Replace the ABS pump and pressure regulating solenoid valve; 3. Repair the ABS computer system. The reasons for the ABS light coming on are: 1. Wheel speed sensor failure; 2. ABS circuit failure; 3. ABS pump or pressure regulating solenoid valve failure; 4. ABS computer failure. The functions of ABS are: 1. To maximize the effectiveness of the brakes, reducing braking time and distance; 2. To effectively prevent vehicle skidding and fishtailing during emergency braking, ensuring good driving stability; 3. To allow steering during emergency braking, ensuring good steering control; 4. To avoid severe friction between the tires and the ground, reducing tire wear.
11
5
Share

What is the reason for the occasional failure of the Audi A6L rearview mirror folding?

The reasons for the occasional failure of the Audi A6L rearview mirror folding are: Damage to the electric rearview mirror motor or disconnection of the control switch fuse; Due to long-term bending of the wiring during mirror folding, causing breakage or loose plug connections; The battery is disconnected or out of power. The function of the rearview mirror is to reflect the situation behind, beside, and below the car, expanding the driver's field of vision and reducing the occurrence of safety accidents. Taking the 2020 Audi A6L as an example, it belongs to the mid-to-large-sized car category, with body dimensions of: length 5038mm, width 1886mm, height 1475mm, wheelbase 3024mm, and fuel tank capacity 73l. The 2020 Audi A6L has a front suspension of five-link independent suspension and a rear suspension of five-link independent suspension. It is equipped with a 2.0l turbocharged engine, with a maximum horsepower of 190ps, maximum power of 140kw, maximum torque of 320nm, and is matched with a 7-speed dual-clutch transmission.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.