How to Properly Adjust a Motorcycle Chain?

1 Answers
OSteven
07/29/25 3:21pm
Motorcycle chain adjustment method: 1. Adjust the chain tension appropriately to maintain a slack of 15mm to 20mm. Regularly inspect the cushion bearing and apply grease on schedule, as this bearing operates in harsh conditions and is highly prone to damage once lubrication is lost; 2. When adjusting the chain, besides aligning with the chain adjustment marks on the frame, visually check if the front and rear sprockets are in a straight line with the chain, as the frame or rear wheel fork may have been damaged; 3. When replacing sprockets and chains, ensure to use high-quality products with good materials and precise craftsmanship to extend their service life; 4. Clean the chain and sprockets regularly and apply grease promptly.
Was this review help?
13
3
Share
More Forum Discussions

Where is Chery's production location?

Chery's production location is in Wuhu City, Anhui Province. Chery Automobile was officially established in 1997 as a state-owned enterprise. The brand also has several sub-brands, including Karry Auto, Qoros Auto, Cowin Auto, and Jetour Auto, making it a significant player in the automotive market. Below is an introduction to Chery Company: 1. Chery Automobile Co., Ltd. was established in 1997 as a large state-owned joint-stock enterprise jointly invested by five investment companies from Anhui Province and Wuhu City. It is located in Wuhu Economic and Technological Development Zone, a national-level development zone with convenient land, water, and air transportation. The company holds a pivotal position connecting the east and west, as well as the north and south, serving as an important industrial base and logistics hub in the Yangtze River region. 2. Construction officially began on March 18, 1997, and by March 2003, the first and second phases of investment and construction were fully completed, covering an area of over 1.3 million square meters. The company now has an annual production capacity of 400,000 engines and 300,000 vehicles. The first two phases each have their own four major vehicle production processes: stamping, welding, painting, and assembly, in addition to two engine plants and one transmission plant. On April 1, 2003, the third phase of Chery's project officially commenced construction, with the fourth and fifth phases also under intense planning.
6
5
Share

Is the Touareg from FAW-Volkswagen or SAIC Volkswagen?

The Touareg belongs to Volkswagen Germany and it is the first SUV model introduced by FAW-Volkswagen. Below is some information about the Touareg: 1. Exterior: The design of the Touareg is quite appealing to younger audiences. The headlights feature sharp angles, while the rear lights have a slight outward bulge, adding to the Touareg's aesthetic appeal. Overall, its appearance is both dynamic and composed, leaving a lasting impression. The front grille is particularly praised by many owners, and the rear design is highly recognizable. 2. Interior: The Touareg's central display and instrument panel both feature full LCD screens, creating a digital cockpit design with a strong sense of technology. The materials used also enhance the premium feel. It comes equipped with ten airbags, a panoramic sunroof, leather seats with heating, wireless phone charging, a HUD head-up display, 30-color ambient lighting, air suspension, adjustable suspension, and various high-tech intelligent driving assistance features. 3. Performance: The Volkswagen Touareg is powered by a 3.0T V6 turbocharged engine paired with an 8-speed automatic transmission, delivering robust performance. Gear shifts are quick and smooth without any lag, and the power output is linear with prompt response. The electric power steering is easy and flexible, with precise handling. The tires provide excellent grip, ensuring confidence during high-speed cornering with minimal body roll.
7
5
Share

Can ETC be installed but not used?

It is possible to install ETC without using it. According to the "Notice on Vigorously Promoting the Development and Application of ETC on Expressways" issued by the State Council, vehicles that have not applied for or do not use ETC by 2020 will not enjoy toll discounts. In the future, only one manual lane will be retained at expressway toll stations, and tolls can only be paid through manual channels. ETC Working Principle: Through the on-board electronic tag installed on the vehicle's windshield, dedicated short-range communication is established with the microwave antenna in the ETC lane at the toll station. Computer networking technology is used to perform backend settlement processing with banks, allowing vehicles to pass through expressway or bridge toll stations without stopping while paying the tolls. ETC Deduction Principle: The toll amount for ETC vehicles is rounded according to the "round down if less than 0.5, no change if equal to or greater than 0.5" rule (i.e., amounts with a decimal less than 0.5 are rounded down, while those equal to or greater than 0.5 remain unchanged). After applying a 5% discount, the amount is then rounded to the nearest cent. MTC vehicles still follow the "round to the nearest yuan" rule. All this is based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Low-carbon, as vehicles pass toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs by decreasing the frequency of vehicle starts and brakes, lowering wear and fuel consumption; Improved efficiency: The efficiency of ETC lanes can theoretically increase by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation cards will be widely interoperable in key urban clusters, and the proportion of vehicles equipped with ETC will significantly increase." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for passenger vehicles on roads should reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and increasing the adoption rate among passenger vehicles, efforts will be made to promote ETC usage for trucks. There will also be exploration into deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments, providing comprehensive travel services for vehicle owners. This means more application scenarios will support ETC usage.
10
3
Share

What is the difference between R17 and R18 tires?

The differences between R17 and R18 tires lie in their size, visual appearance, driving performance, handling characteristics, and wear patterns. As one of the most critical components of a vehicle, tires ensure driving safety, handling stability, comfort, and fuel efficiency. Different sizes: R17 tires have a 17-inch wheel diameter, while R18 tires have an 18-inch wheel diameter. Different visual appearances: R18 tires, with their larger size, offer a more imposing and aggressive look, enhancing the vehicle's overall presence. In comparison, R17 tires appear slightly less striking. Different driving effects: R18 tires have thicker sidewalls, providing better cushioning on bumpy roads. R17 tires, on the other hand, offer more responsive handling at high speeds but transmit more road feedback on uneven surfaces due to their weaker shock absorption. Different performance characteristics: Smaller wheel diameters (like R17) typically result in thicker tires (higher aspect ratio), improving ride comfort. Larger wheels (like R18) generally feature lower-profile tires, enhancing handling, sportiness, safety, and stability. Different wear patterns: Each inch increase in wheel diameter leads to flatter tires with thinner sidewalls. This increases the tire's contact patch, improving grip—especially during cornering and wet-road handling—while reducing lateral sway, enhancing braking performance, and increasing safety. Functions of tires: They work with the suspension to absorb road shocks; ensure ride comfort and smooth driving; maintain good traction between wheels and road surfaces; improve acceleration, braking, and off-road capability; and support the vehicle's weight. Tire maintenance tips: Regularly clean tires: Driving on various road surfaces can lead to debris (like small stones or glass shards) getting stuck in tire treads. Timely removal of these foreign objects prevents punctures and potential hazards. Regularly check tread depth: Inspect tires for bulges, cuts, or peeling. Replace tires when tread wear reaches the wear indicator bars to avoid safety risks. Regularly check tire pressure: Both overinflation and underinflation can cause abnormal wear, tread cracking, cord breakage, ply separation, or blowouts. Regularly rotate tires: Rotate tires periodically to ensure even wear and extend lifespan. Install slightly larger-diameter tires on the outer wheels when possible.
7
2
Share

What does Audi FSI mean?

Audi's FSI stands for Fuel-Stratified-Injection, which means fuel stratified injection, an innovative and revolutionary technology in the field of direct-injection gasoline engines. The following is relevant information about FSI technology: 1. The most significant advantage of FSI technology is that it can improve fuel economy and reduce emissions while providing greater output power and torque. 2. FSI fuel direct injection technology achieves the perfect combination of engine power and fuel economy under the same displacement. It is the most mature and advanced fuel direct injection technology in today's automotive industry engine technology and leads the development trend of gasoline engines.
8
5
Share

Can a Faulty Idle Motor Cause the Engine Light to Illuminate?

A faulty idle motor can cause the engine light to illuminate. Consequences of a faulty idle motor: A malfunctioning idle motor can affect fuel consumption, reduce the engine's braking power, and cause severe wear on the brake pads. It is recommended to replace the idle motor. Reasons for the engine fault light to illuminate: Poor-quality gasoline; carbon deposits in the intake tract and piston top; excessive engine mileage leading to weakened spark plug performance; during cold starts, especially when temperatures drop sharply, the pollution light may illuminate due to the computer's temperature correction issues, but it will stabilize once the temperature drops to a certain level and remains steady.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.