How to Pay the Fine for Not Wearing a Seat Belt?

2 Answers
DiJason
07/24/25 9:40pm
Payment of fines for traffic violations: 1. Bring the vehicle's license, driver's license, and ID card to the traffic police station's violation processing window. 2. Take the violation notice issued by the traffic police to the designated bank to pay the fine, which must be paid using a bank card under the owner's name. 3. You can also pay online by entering the violation notice number on the bank's website under public service payments—traffic violation fines. Here is some relevant information: 1. Urban expressways: When driving on urban expressways, if the driver does not wear a seat belt as required, a fine will be imposed and 2 points will be deducted. 2. Highways: When driving on roads other than highways or urban expressways, if the driver does not wear a seat belt as required, a fine will be imposed without point deduction.
Was this review help?
11
4
Share
Phyllis
08/10/25 2:44pm
Last month I also got fined once for not wearing a seatbelt, which is quite common. The ticket will provide you with a QR code or payment method. Usually, you can just scan the QR code on the ticket and pay directly via WeChat or Alipay, which is very convenient. If you don’t have your phone with you, you can handle it at a bank counter—most banks now support traffic fine payments. Additionally, local traffic police apps also allow online payments; just download the "Traffic Management 12123" app. The key is not to delay, as failing to pay within 15 days may result in late fees and could affect your driver's license points. Next time you drive, make it a habit to buckle up—it’s not just about avoiding fines but, more importantly, about protecting your safety. I’ve seen too many minor accidents turn serious due to not wearing a seatbelt. Buckling up only takes a few seconds, and life is priceless. Always remember to check if your seatbelt is functioning properly and if the buckle is intact—prevention is key.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

How to Align the Timing Chain on a Roewe 350?

To align the timing chain on a Roewe 350, follow these steps: 1. Locate the small hole blocked by a white plastic plug at the lower right corner of the engine transmission exhaust manifold. 2. Remove the plug and insert an L-shaped iron bar of the same size as the hole. 3. Insert the iron bar into the small hole on the flywheel. 4. Ensure the two round holes on the camshaft are vertically aligned upwards to lock the camshaft in place. Taking the 2015 Roewe 350 as an example, it is a compact car with body dimensions of 4521mm in length, 1788mm in width, 1492mm in height, a wheelbase of 2650mm, a fuel tank capacity of 55 liters, and a curb weight of 1290kg.
20
1
Share

What Type of Transmission Does the Buick Envision Have?

Buick Envision has two types of transmissions: the 1.5T model uses a dry 7-speed dual-clutch transmission, independently developed and produced by SAIC-GM, while the 2.0T model uses a conventional 9-speed automatic transmission. Below is some relevant information: 1. Dry Clutch: A clutch that uses air for cooling is called a dry clutch. In use, the clutch should engage and disengage smoothly and easily, and should not overheat even when operating under semi-engaged conditions for short periods. 2. Dry clutches, because they lack the resistance of oil, generally engage more quickly and with greater force. Also, since there is no oil for cooling, dry clutches are usually exposed to dissipate heat.
16
1
Share

Does the 2017 Lavida come with tire pressure monitoring?

2017 Lavida comes with tire pressure monitoring. The tire pressure monitoring alarm system in the 2017 Lavida is enabled by default and only activates the tire pressure warning light when abnormal tire pressure is detected, alerting the driver. Therefore, there is no physical button for the tire pressure monitoring system in the car. Below is an introduction to the 2017 Lavida's tire pressure monitoring: 1. The Volkswagen Lavida's tire pressure monitoring system uses data transmitted by the ABS system sensors to monitor the rotational speed and rolling circumference changes of each wheel. If the rolling circumference of a wheel changes, the warning light will illuminate. 2. The Lavida's tire pressure monitoring values are not displayed on the dashboard. It is recommended to carry a tire pressure measurement tool to easily monitor the tire pressure of the vehicle's tires.
17
1
Share

What do the letters on license plates in Hubei represent?

Hubei license plate letters represent: E A for Wuhan, E B for Huangshi, E C for Shiyan, E D for Jingzhou, E E for Yichang, E F for Xiangyang, E G for Ezhou, E H for Jingmen, E J for Huanggang, E K for Xiaogan, E L for Xianning, E M for Xiantao, E N for Qianjiang, E P for Shennongjia, E Q for Enshi. License plates consist of 7 characters: the first character is the abbreviation of the province, the second character is the abbreviation of the prefecture-level city, and characters 3 to 7 are a combination of numbers and letters. Functions of license plates: 1. Numbering and information registration for vehicles; 2. Identifying the region of vehicle registration; 3. Tracing vehicle owners and registration information based on the license plate.
16
0
Share

Is the T-Roc equipped with a dry or wet clutch?

The T-Roc is available with both dry and wet dual-clutch transmissions, depending on the model variant. The 1.4T high-power 4WD version is equipped with the DQ381 wet dual-clutch transmission. All other variants, except the 1.4T high-power 4WD version, come with the DQ200 dry dual-clutch transmission. More details about the T-Roc are as follows: 1. The T-Roc's body dimensions are 4318mm in length, 1819mm in width, and 1582mm in height, with a wheelbase of 2680mm. 2. The T-Roc is powered by three engine options: a 1.2-liter turbocharged engine, a low-power version of the 1.4-liter turbocharged engine, and a high-power version of the 1.4-liter turbocharged engine.
6
3
Share

Where is the SWM X3 produced?

SWM Motors originates from Italy. The domestically independently developed model is produced in Chongqing, China. SWM Motors belongs to the Brilliance company and is a brand under Brilliance. The origin of SWM: The SWM brand was established in Milan, Italy in 1971. It was popular in Europe and America during the 1970s and 1980s, becoming a symbol of Italian manufacturing. The development of SWM Motors: In 2014, the Dongfang Xinyuan Group fully acquired the Italian SWM brand and established the SWM Motors Design Center in Milan, Italy. In the same year, a 1704-acre modern industrial production base was built in Fuling, Chongqing, with the Italian R&D center responsible for the exterior design of the models.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.