How to Operate the Automatic Transmission of Toyota Vios?

1 Answers
StephenFitz
07/29/25 8:10pm
Turn to the second gear of the power position to start the computer system. Shift the gear from P to N. If you need to reverse, directly ignite in P gear. Turn the ignition key to the ignition position to start the car's engine. Shift the gear from N to D. If starting on a slope, you can first shift from N to D, lightly press the accelerator, and slowly release the handbrake for a smooth start.
Was this review help?
7
5
Share
More Forum Discussions

What are the L gears in an automatic transmission?

L--Low, low gear. When going downhill or on long slopes, shifting to this gear restricts the car to the lowest gear (equivalent to first gear in a manual transmission), allowing the engine to assist in braking. This prevents the brake pads from overheating due to prolonged braking, reducing the risk of danger. Below is an introduction to the various gears in an automatic transmission: 1. P--Parking, parking gear. 2. R--Reverse gear, used for reversing. 3. N--Neutral, neutral gear. 4. D--Drive, the forward gear. 5. 2--Low gear. 6. L--Low, low gear. 7. OD----Overdrive gear, used for high-speed driving to achieve fuel efficiency.
11
0
Share

Will the Car Be Compensated in Case of Flood?

If you have purchased vehicle damage insurance, the insurance company will compensate. According to the relevant provisions of the insurance policy, vehicle losses caused by general 'natural disasters' such as heavy rain, floods, landslides, and mudslides fall under the insurance liability of commercial auto insurance's vehicle damage insurance, and the insurance company will settle the claim. Therefore, direct losses to the vehicle caused by flooding will be compensated by the insurance company as stipulated in the insurance contract. However, if you knowingly drive through severe water accumulation, resulting in engine damage, or if the engine stalls during water wading and is damaged due to forcing a second start, the insurance company will not compensate.
16
4
Share

How to Open the Hood at the Front of a Car?

The methods to open the hood at the front of a car are: 1. Lift the handle upwards, then raise and support the engine hood; 2. Push the hood latch switch to the right, then lift the engine hood; 3. Rotate the emblem counterclockwise, use the key to rotate clockwise, open the engine hood, and support it; 4. Pull the switch on the left front side outward with your hand, open the engine hood, and then support it; 5. Press the engine compartment hood lock upwards with your fingers, open the engine hood, and support it. The functions of the car hood include: 1. Assisting driving vision by effectively adjusting the direction of reflected light to prevent accidents; 2. Airflow guidance and protection of the engine and surrounding pipeline accessories.
6
1
Share

What is the working principle of an electromagnetic overflow valve?

Working principle of an electromagnetic overflow valve: When the electromagnetic overflow valve operates, it uses the pressure of the spring to regulate and control the pressure of the hydraulic oil. When the pressure of the hydraulic oil is less than the required working pressure, the valve core is pressed by the spring against the inlet of the hydraulic oil. The greater the pressure of the hydraulic oil, the higher the valve core is lifted by the hydraulic oil. Below is the structural composition of an electromagnetic overflow valve: 1. The electromagnetic overflow valve mainly consists of a valve body, valve core, spring, and adjusting screw. 2. Spherical valves are used in low-pressure, small-flow hydraulic systems. 3. Conical valves are used in higher-pressure, small-flow hydraulic systems, and the sealing effect of the conical valve core is better than that of the spherical valve. 4. The function of the overflow valve is to prevent the pressure of the hydraulic oil in the hydraulic system from exceeding the rated load, providing a safety protection role.
14
2
Share

Is reversing after discovering wrong-way driving considered a traffic violation?

Reversing after discovering wrong-way driving is considered a traffic violation. Here are the relevant details: Wrong-way driving situations: Motor vehicle wrong-way driving refers to the following circumstances. On roads with solid dividing lines, motor vehicles entering the opposite lane. Among these, roads with double solid lines or single solid lines must not be crossed under any circumstances. On roads with dashed dividing lines, lane borrowing for overtaking is permitted when safety is ensured, but once an accident occurs, the lane-borrowing vehicle will be deemed to be driving the wrong way. Important notes: When driving a motor vehicle, always obey traffic rules and never drive the wrong way. Be responsible for yourself and others.
9
0
Share

How to Clear the Engine Fault Light on a Peugeot 307?

To clear the engine fault light on a Peugeot 307, follow these steps: 1. Use a diagnostic tool to check the fault codes; 2. Perform repairs based on the fault codes and then clear them. The Peugeot 307 is a compact 5-door, 5-seat hatchback with the following dimensions: length 4212 mm, width 1762 mm, height 1531 mm, wheelbase 2608 mm, and a fuel tank capacity of 60 liters. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 86 kW and a maximum torque of 150 Nm. The vehicle comes with a 5-speed manual transmission, front-wheel drive, MacPherson strut front suspension, and a rear suspension featuring a deformable crossbeam with a stabilizer bar.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.