How to Open the Trunk of Toyota Prado?

1 Answers
LaNora
07/29/25 2:24pm
Toyota Prado trunk opening methods are: 1. Pull up the trunk switch located at the lower left corner of the driver's compartment; 2. Use the key to open the tailgate, press and hold the middle button on the trunk to open it. Below are some details about the Toyota Prado: 1. Body dimensions: Length x Width x Height are 4820mm x 1885mm x 1890mm, wheelbase is 2790mm, fuel tank capacity is 70 liters, and luggage compartment volume is 1850 liters. 2. Engine: Equipped with a V6 1GR engine, maximum horsepower is 202kW, and maximum torque is 381Nm.
Was this review help?
1
5
Share
More Forum Discussions

How to Set Up Auto-Locking for Cars?

For automatic transmission vehicles, the method to set up auto-locking is: 1. Shift to the P position, then turn the key to the ON position; 2. Close all doors, press and hold the lock button for about 6 seconds until the hazard warning lights on the dashboard flash twice, indicating the setup is complete. For manual transmission vehicles, the method is: 1. Turn the ignition switch to the ON position, within 20 seconds press and hold the electric door lock switch to LOCK for 5 seconds. If the operation is successful, the hazard warning lights will flash twice for activation and once for deactivation. The purpose of the auto-locking function is anti-theft, allowing the doors to lock quickly after driving starts, preventing incidents like door-pull robberies during traffic jams or at traffic lights, thereby providing a certain level of security.
20
0
Share

Can the 1.2T engine of Lavida use 92 gasoline?

The 1.2T engine of Lavida cannot use 92 gasoline; it requires 95 gasoline. Using 92 gasoline may cause engine knocking. Taking the 2019 Lavida as an example, it belongs to the compact car category with body dimensions of 4613mm in length, 1765mm in width, 1460mm in height, a wheelbase of 2610mm, and a curb weight of 1210kg. The 2019 Lavida features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine producing a maximum horsepower of 112PS, a maximum power of 82kW, and a maximum torque of 145Nm, paired with a 5-speed manual transmission.
13
0
Share

What to Do If the Car Master Key Is Lost?

If the car master key is lost, the solutions are: 1. Use the spare key to unlock the car; 2. Re-match the key and replace all the car locks. The functions of the car key include: 1. Closing the windows automatically after turning off the engine; 2. Making it easier to find the car in a parking lot; 3. Automatically opening the trunk; 4. Remotely opening the windows. The maintenance methods for car keys are: 1. Avoid frequently placing them with metal objects; 2. Do not leave the spare key in the car door; 3. Prevent the smart key from falling or being impacted; 4. Avoid exposing the smart key to high temperatures or contact with liquids; 5. Do not place the key with electronic devices.
13
1
Share

What type of transmission does the Trumpchi GS3 use?

The Trumpchi GS3 uses a 5-speed manual transmission, 6-speed automatic manual transmission, and 7-speed dual-clutch transmission. It is a compact SUV. Taking the 2021 Trumpchi GS3 as an example, its body dimensions are: length 4350mm, width 1825mm, height 1685mm, wheelbase 2560mm, fuel tank capacity 50l, and curb weight 1347kg. The 2021 Trumpchi GS3 features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 163ps, maximum power of 120kw, and maximum torque of 235nm, paired with a 6-speed manual transmission.
17
3
Share

Where is the alternator located?

The alternator is located at the front of the engine. You can see it by looking downward after opening the engine hood. The function of the alternator is to supply power to all electrical equipment (except the starter) while the engine is running normally, and simultaneously charge the battery. The maintenance methods for a car alternator are: 1. Clean accumulated dirt and dust from the alternator surface; 2. Check and adjust the belt tension; 3. Verify that the wiring between the alternator and voltage regulator is securely connected. The replacement steps for a car alternator are: 1. Disconnect the battery cables; 2. Locate the alternator; 3. Loosen the bolts and release the belt securing the alternator; 4. Remove the alternator, disconnect and take out all nuts connecting electrical components; 5. Install the new alternator by following the reverse procedure.
17
0
Share

What brand is V?

The car with the V logo is a domestic brand produced by Changan Automobile. Additional information is as follows: 1. Production Bases: Changan Automobile and its holding companies have vehicle production bases across China, including Chongqing, Heilongjiang, Hebei, Jiangxi, Jiangsu, Anhui, Zhejiang, and Guangdong, with 33 vehicle (engine) factories and 18 directly affiliated enterprises. The annual production capacity for vehicles and engines reaches 2.3 million units, and marketing institutions have been established in over 30 countries worldwide, with products sold in more than 70 countries and regions. 2. Product Lineup: Changan Automobile boasts a comprehensive product lineup. After years of development, it has formed a broad and diverse product spectrum covering mini vehicles, sedans, buses, school buses, heavy-duty trucks, and special-purpose vehicles, with engine platforms ranging from 0.8L to 2.5L in displacement.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.